Intruder Alarms

I have a client who has an existing alarm system with a eurosec keypad, PR5208 rev 1.0. The keys 2 & 5 have given up working, so we need to replace just the keypad. Is the "Risco Gardtec Eurosec LCD Keypad" product that you sell the right one, or do i need the other one you sell that is for CPX and GTag? Also the original company to fit the system are no longer around, would you have a copy of the installer manual with the default master/installer code as i quite expect that taking the old pad off the wall will set off the system and as the buttons dont work i'll need to reset it all.

Do you have any motion sensors with two contact sets ? So that it is possible to use one contact for alarm, and one for home automation ?

can the texecom veritas panel have a remote keypad fitted to it?

Hello, Is it possible to purchase ceiling brackets for this PIR from Security Warehouse? The bracket required is the EB1 (Pyronix part FP01210). I can't seem to find anywhere to purchase these as a seperate item. Thanks John

can you suggest a good quility wired alarm system for 5x pir, 2x remote key pads, or 5 x pir, 1 x remote key pad, and a key fob which could be up graded for a dialler as well .

Deleted

Hi, Im looking for a long range (reliable over 30m) outdoor motion detector to control outdoor lighting. It needs to be able to be triggered by a person or car but not trees and shrubs. I got a cheap one which picks up shrubs so my outdoor lights are constantly on and off! Thanks

Hi I need a full system. The main building requires 9 zones and there is an outbuilding within 15 yards of the main building which has mains power and requires 2 zones. I believe that for the outbuilding I need a wireless expander as I do not want to fit wireless sensors. The main building is suitable for a wired setup. I would appreciate some guidance on a suitable, cost effective control panel and accessories.

was hoping you sold the Visonic K9-85 pet immune PIR's but noticed the Scantronic CS430's that look almost identical on your listings (same can be said of Visonic K980 and Scantronic CS440). Can't remember if Cooper are now the same as Visonic but my question is, are they the same? Thanking you in advance,

I live in UK , but have a holiday home in Spain ,and need an intruder alarm ( that doesnt need a landline ) to notify me of a trigger to my mobile phone .I dont really have any permanently resident and reliable close neighbours to act as a keyholder or lookout . A sound bell/siren would not be of help or long term deterant . Need ideas of a suitable system , and outline costs .

Hi I have a securilite alarm system fitted with the IBX Command centre in the house which has Single head PIR sensor outside to cover the drive way, the sensor has failed and i cannot see any part numbers on the sensor and i am unsure which one to order from you, it looks identical to the voltek sensors you list but which one ? would the Voltek 1804 single head sensor be suitable for this with the range of 18m x 90 degree angle ? Kind regards

Recommendations for a keypad and fob activated alarm system with 1/2 motion sensors and 2 door switches compatible with the master blaster 127db alarm siren

Hello, I have a Blue Line Gen 2 (ISC-BPQ2-W12) Bosch PIR. Can you advise if this is suitable as a replacement for a detection systems DC950-A pir connected to an Ademco Microtech Galaxy 60 C052 alarm panel

Hi I need to check a couple of things... 1. If I order the "Castle Care-Tech Euro One (includes LCD keypad)" from your site - part number EUR-1024... it says you get the panel and the remote keypad - is the keypad fitted with the Prox sensor for proximity fobs? 2. If it is how many fobs come with the panel? 3. We have never fitted this panel and have tried to get the engineer/installation manual from the Castle Care Tech website and it is password protected... we have registered with them but heard nothing yet - does the panel ship with installation/setup details? 4. do you have to use the Castle Care-Tech proximity fobs, or can you programme the cheaper ADE Ho…

Please would you clarify if the "Honeywell Intellisense 800L 8 Zone LED Control Panel Honeywell Intellisense 800L 8 Zone LED Control Panel" at

I'm wanting to buy a Bosch ISM-BLD1-P burglar alarm sensor, to replace a non-pet friendly sensor that is currently installed- it is a pain to keep pets out of that particular room. (The rest of the house is covered by existing ISM-BLD1-P's). The webpage mentions that there are different microwave frequencies that the detector can operate at, with each different frequency variant having a different letter at the end of the product code (F1, F3 or F4). Are you able to advise which frequency I am likely to require- are these different units? I can't find any mention of microwave frequency in any of the documentation for my current system.

Hi, Just trying to put together a quote for a high end residential property, we are upgrading the video intercom, cctv amd intruder alarm...in the past have used powermax for small residential wireless and galaxy for commercial, client likes fancy toys, is there any intruder and cctv that can be integrated or an intruder system that has an app for a smart phone but the system must be wireless. Basically they want a fleshly system he can show off

I am looking at the few control panels and have a few queries which I hope you can assist with. Install is for detached 5 bed house. Suggestions are: - Texecom Veritas R8 Plus - Scantronic 9651EN - Pyronix Sterling 10 1. Believe all are grade 2 but not entirely clear. Is this correct? 2. All seem to be 8 zone but with the Sterling it has an additional dedicated PA zone. I am correct that on the others would need to allocate 1 of 8 zones for PA? 3. Last install a few years back was a Pyronix Paragon which we had no problems with. Is the new Sterling of similar quality to the Scantronic and Texecom which seem to be a lot more popular? 4. Assume all ha…

I am considering purchasing some sensors and require the red flashing light to be activated as a visual deterant when the alarm is ON and also when it is OFF. I am currently looking at the Viper GL-W thats says the LED is activated by LINK and the GLX-W that says is activated by SWITCH. Can you please explain what the difference is between LINK and SWITCH. Also, The GLX-W PC.09000-20 is priced at

Can 1 dialler be used between 2 alarm systems that are within 100m of each other?

Hi, Just trying to put together a quote for a high end residential property, we are upgrading the video intercom, cctv amd intruder alarm...in the past have used powermax for small residential wireless and galaxy for commercial, client likes fancy toys, is there any intruder and cctv that can be integrated or an intruder system that has an app for a smart phone but the system must be wireless. Basically they want a fleshly system he can show off

Hello, Can we assign different sirens (I want 2 sirens) depending on the zones or suites on Texecom Premier elite 44 or more.

Having just commissioned a 9651 I've been testing out event logging for the system. I isolated the mains supply, hopping to invoke a mains fail alert. The RKP recorded the event properly, but interrogation of the event log showed no mains fail alerts. I carried out this mains fail test for both set and unset modes with the same result. Do I have to enable logging for this type of event somehow, or should it be enabled automatically? Or perhaps there's a timer on mains fail events and I didn't leave the mains off long enough? Any ideas? thanks John

Hi, I would be most grateful if someone could answer the following question regarding this panel as I can't seem to get hold of the installation manual for it. 1. Product description for the Euro Mini says that this panel has 10 EoL zones. Does that mean that it is FSL capable? 2. If so what are the resistor values? 3. I'm assuming that I would require a 12v 7AH backup battery for this panel. Would that be correct? Thanks in advance.

Hi, how is this alarm armed and disarmed? Does the alarm come with all of the parts to mount it to a wall? How loud is the alarm? We have an external light which sometimes comes on at night if our neighbour walks into his garden, would this light coming on at night time trigger the alarm? i look forward to hearing from you.