Intruder Alarms

We have a scantronic 9448 alarm system and have recently had a new front door fitted. The original door was solid wood and had a door sensor fitted into the top of the door. Our new door is upvc and we require a flush fitting sensor which can be connected to the existing wiring. Please advise on which item we should select.

Hi, Do you also sell the door contact and smoke sensors for this? Do your prices include VAT? How much is UK delivery? (looking at the kit and 3 PIR's) thanks

I need a replacement control panel for my Securit 800L alarm. Please could you tell me if you have one or suggest a suitable replacement.

Dialler with gsm backup if bt line fails.

Hi, i need help deciding between a PowerMax + (Visonic) or the Scantronic 9751-EN-00 55K for a 5 bedroom house. I need a 5 PIR, 8-10 shock sensors and 1 door contact with a wired outside bell, with a dial out facility. I also want to be able to hardwire the system to the garage later on. If not is there a better system that you could recommend? Any help would be greatly appreciated Many thanks, Surinder J

Hi, I need support with my powermax plus control panel, I have had my system working fine for around 11 months. I am having trouble disarming the system with the panels keypad, i get to 3 digits and then it just beeps. I have changed the code and it is still happening. All the buttons seem to work fine and i can disarm ok with the keyfob. Can you provide a solution or where i need to go for help? Or do i need a replacement panel?Many Thanks

Hello, I have purchased a CQR 3/8 Flush Contact 1 RD 4 Wire White, but it does not work on my door. Most probably, it's because the gap est too large and the metal door interfere with the contact detection. I am looking buying a new flush contact. Which one do you recommand? You have so many. The installation environnement is: metalic door, large gap (difficult to measure, probably at least 10mm), if possible a contact with direct wiring. Looking forward your answer

I'm seen your texecom starter kit - New Texecom Ricochet Kit 2 64 Zone Wireless Kit with Sounder. I want to buy a texecom direct wired bell box. Can I wire that into the control panel for this kit or will it only work with a wireless bell box? Does the Texecom AEB-0001 Impaq Plus Shock Sensor Grade 2 work with the New Texecom Ricochet Kit 2 64 Zone Wireless Kit with Sounder. Also is there an option to have the system txt me when its set off?

I am looking for a SIP dialer module that will work with a Honeywell Galaxy alarm system

My house alarm (veritas r8) keeps going off while unset. i walk around my house then go in to zone 2 (kitchen)where i have a PIR, the alarm goes off while unset, the keypad lights up indicating zone2 how do i stop this? thanx Daniel

Do you stock GS611, or GS711, or any similar shock sensor that works with analyser mod, preferably with integrated reed switch, in brown? All I see in the online store is in white.

You sell them @

Hello, I have a 3 bed semi and wish to replace my troublesome old alarm for a DIY alarm system upto

Hi All, I have just moved into a new (8 year old) house that has a 9651 alarm. I wanted to change some upstairs lights only to find when I turned the lighting circuit off the alarm started sounding. On further inspection, the alarm system shares the same power circuit as the upstairs lighting. I then tried disconnecting the batteries in the alarm control box and that just sent the alarm crazy again. Is there anyway this system can be put into a "engineer mode" ie can I turn the power off without the alarm sounding?. I have tried the alarm installation company but they can't help over the phone (suppose for security reasons) but are wanting silly money to come out? …

I am looking for a recommendation for a wireless single channel transmitter and receiver to be used as a PA button. The receiver would be wired to a Scantronic 9651. Would I be right to think the Visonic MCR-304 is now obsolete?

Can any one tell me is there such a thing as a window contact+vibration sensor combined (hard wired) if so what is it called and who makes it, seems a pity to have to fit both if there is a combined unit. thanks again for all your help

have you any in stock that are compatible with the scantronic 500r - 2 pirs, 1 remote setting device, 1 door contact, 1 wired bell/siren external

i've been looking at these keypads here: http://www.securitywarehouse.co.uk/catalog/texecom-premier-elite-keypad-p-2481.html You talk about SMK and FMK, is this kit suitable for either surface or flush mounting?

hi, just looking at putting an order together, looking at veritas 8 excel with prestige detectors and 3e bellbox, not sure which door contact are suitable though, any help would be great. the doors are upvc. is this a decent model or would you reccommend something else. it is for a diy installation so looking for something that isn't too complicated. i;e what is eol cheers

Anybody know if the SD2 dialer will work in North America. concerned about the ringer detection circuit as here in North America we use 90V at 20 Hz. Thanks

Hi! I am interested in the above kit, will it conform to grade 2 EN50131?

I need to purchase an alarm system for a small basement office. I need three PIR, one door contact, one bell box then I would like to purchase Menvier M Series plus a dialler. Can you please advise what I need on control panels (1 needed) and the main box? I have cable. Thanks

Trying to find a good quality PIR sensor for lighting control. Just to turn on about 200W of lighting for, say, 15 minutes when persons detected during darkness. One sensor, one output. Min range 30m. (It's for use in a churchyard.) Ideally a stand-alone unit, but could be a PIR head plus power supply / relay unit. I don't need manual overrride, timers, etc. If I used one of these, what additional kit would be needed? https://www.securitywarehouse.co.uk/catalog/opal-xl-12v-pir-35m-p-642.html Similarly, for this one: https://www.securitywarehouse.co.uk/catalog/voltek-single-head-external-sensor-long-range-black-1804lrb-p-1532.html Thanks.

I have a Securit 800L+ alarm panel. Fitted by the housebuilder. I need to remove the alarm panel for building work. It would appear the siren is a Self Contained Bell or a Self Activating Bell. When I disconnect the mains and the internal 12v lead acid battery the siren goes off. Would keeping the siren -Ve and +Ve at 9v to 12v keep the siren from sounding.? I have the installation manual for the alarm but I do not have any details of the siren box fitted.

just a quick question might sound daft but need to know never the less. does the secware sound bomb wire into the extension speaker terminals?? ive never worked with these before. ASDGROUP