Intruder Alarms

can the texecom veritas panel have a remote keypad fitted to it?

Can you tell me if I were to buy 2 or 3 different system PIR's would they all work in any alarm system. I have a system fitted that requires additional PIR units for more protection. I have had a home security police team look over my house. I would be grateful for any advice on this matter.

Do you stock the additional PIR for the Electronics Line Infinite Wireless Kit, if so at what cost?

I am looking for an addressable Intruder Alarm System. I have already passed a 2 core power cable and 4 core looping from each PIR. Can you please guide me to find the correct system? I also need to connect an access control system with the intruder alarm system. Will look forward to hear from you. Thanks and Kind Regards

iam looking to buy a 800l control panel but i have noticed that they are sold out any chance if you are going to restock them

The wiring diagrams are unclear for connecting the panel to the external sounder/bell box. The connections on the bell do not relate to the bell instructions. Can you tell me how to connect the two. On the ADE GEN 4 panel i have..... STROBE +VE STROBE -VE T A D B On the bell i have..... ST- R- SW- V+ V- Please tell me what connects to what........

You sell them @

Hi, I have an ADE ID Ultimate alarm panel and connected devices, plumbed into my property. The panel has been doing some weird things of late, I have replaced the battery and checked all the fuses but still it's giving me grief. Do you have any suitable alternatives that work off the same kind of 4 wire technology to save having to re-wire the house. I have both of the 30 channels enabled but I don't have 60 items connected, I tried to split off the fire detectors from the rest of the alarm devices. Cheers,

hi i have just purchased a new house, it has this alarm system fitted ADE LOGIC SIX it is live and the passives appear to be working however i am unable to find a key pad, or key fob, to set the alarm , do you supply spare key fobs ? and are they easy to pair with the alarm fitted in my house ? any information would be a great help

I purchased an alarm system last year, and until today has worked without fault, however, when my Wife tried to set our alarm in the usual way using the ADE Simple Set she was unable to do so. When I came home I also tried without success. The unit shows both Power & Day lights but when either a 'learnt' or an 'unlearnt' fob is offered to the unit there is no response regardless of the length of time the fob is held against the unit. Any advice would be greatly appreciated. The unit is less than 12 months old

I have an old ADE Ultimate (using id biscuit) Burglar alarm system. Purchased in 1993. The remote keypads are playing up. Do you have replacement remote keypads for this system or can you suggest compatible remote keypads for this system? Thanks.

Hi, I've had the above system fitted by ADT (it has the LCD radio keypad) and I was checking to see if your gray tags should work - that is, would ADT manage to disable tag use and programming on their equipment. They have already quoted a silly price for the radio tag (

I have a former ADT monitored alarm and I need to purchase a few more accessories for it. It is a Visonic Powermaster 30. Somebody told me that not all the Powermaster accessories work with the ADT alarms. Is this correct or will the PIRs and contacts you sell work with the system?

I am looking to alarm my workshop. It consists of 3 rooms currently with plans to add another room in the future. There are 2 up and over doors, 1 standard access door and 1 double split opening door. 2 of these doors will be entry points with a keypad located close by. Only one of the rooms has a window. There is a cat flap in one of the doors for pet access. I have been looking on your website and come up with the following list of products for the system based around a Honeywell Accenta G4 Mini panel. I chose this panel because of price and expandability. Can you tell me if all the items on the list below are compatible ? Is there anything missing from the list that I …

we would like to fit a wired Alarm system, we have made the following list of items We like the look of the scantronic 9941 box as we would like to put a TSD2 speech dialler on so that we can telephone and check the system remotely. > > We would then like to put a remote keypad in the porch area at the front of the house which we would like to have night set options. We would also like to have a personal attack button and maybe a keyfob to de activate the system. We would like an internal sounder but maybe this is built in to the system. > > We would like a siren and strobe sounder on the front of the building. > > Detection Points > > …

Hi iv recently bought a 4 zone shock anylser from you and iv found the varible resistor to adjust each zone but how do you adjust the pulse count.

Now that I've replaced the old Optima with the new Optima 2 lanel, I'm now trying to swap the old sensors with the pet friendly Active8 PIR models. However, new sensors have: 1: EDL (single connection) 2&3: Tamper (double connection) 4&5: Relay (double connection) 6: EOL (single coneection) 7: 12v + 8: 12v - Two of my old sensors have: N/C Lt Blue then Yellow Propose: Relay 4&5 + Red Propose: 12v + 7 - Black Propose: 12v - 8 24hrs Lt green then white Propose: Tamper 2&3 My remaining sensor has: Alarm Lt Green then White Propose: Relay 4&5 + Red Propose: 12v + 7 - Black Propose: 12v - 8 Tamper Empty and Empty Please…

I am looking for a Texecom panel to use biscuits, with 2 KP and also want some smoke detectors. Could you recommend which products are best please?

Can you please confirm this product is a heavy duty door surface contact, approx. size 20 x 80 x 20mm deep. Also that this product comes as a pair i.e. contact and a magnet.

I have a Gardtec 800 system with an 8 way zone expander unit. After a lightening storm the panel comes up with a fault: LEX1 tamper. I believe this is a line expander unit fault. You are selling a Gardtec 02083 Zone expander unit - is this the same as the line expander unit I have (label with EX MO1/11 EN50131-1 PD 6662 G3 EC2 PR5705 Rev 1.0 4390) I would appreciate your help.

I need to purchase an alarm system for a small basement office. I need three PIR, one door contact, one bell box then I would like to purchase Menvier M Series plus a dialler. Can you please advise what I need on control panels (1 needed) and the main box? I have cable. Thanks

Does the Texecom SPEECH DIALLER Text Alerts system send texts directly i.e. when the intruder has already cut all the BT lines & broadband etc, will it still work - does it have a SIM card?

I am replacing my old alarm system. I have done some research and it appears Scantronic are a good make in terms of functionality and reliability and come recomended from a colleague who has installed them previously. I have a wired sounder at present and want to maintain the wired asoect if possible. I'm looking at: i-on16 Control Panel (1) 714 Wireless PIR (6) Wireless door contacts - brown (2) Compatible wired sounder or the wireless one for i-on16 Please advise if the above are all compatable and what is my best option for a sounder. Also would the wireless PIR work in my detached garage? It's approximately10 metres from the control panel location.

I have installed, approx 9 years ago, a scantronic 500r.+ system and have had the remote control stolen during a break in. My fear is they will return. Is it possible replace the control box with a new one in order to make the remote U/S, Or is it possible to disable the remote. I have 4 PIRs one door sensor and a remote key pad. Sorry I have marked this high but having just lost a new car do not wish then to re-visit disble the alarm and clear the rest of the house. Thank you for your time.

Hi, i'm looking to buy a wireless digital alarm system with at least 16 zones. i'll also need the contacts and pirs etc to go with it. Can you help?