CCTV

Hi all, i have this old system and the controller unit that the cameras plug into is making a humming noise that is anoying as its in living room, is there any other controler units that will accept my 4 s-video bw cameras that are already setup on my property ? many thanks Mike.

Hi everyone, I’ve been working on people counting solutions that work with most standard IP/CCTV cameras, especially for retail stores, malls, and public venues. It’s been really interesting to see how different camera placements, resolutions, and lighting conditions affect accuracy. I’ve found that keeping the camera high and angled downwards usually gives the most reliable counts, and anonymizing the footage is a must for privacy compliance. I’d love to hear how others here handle similar analytics projects. Have any of you worked on footfall or people counting setups before? Any tips or pitfalls to share? Thanks!

I previously sent this by email but received an automated response saying to post on this forum. I ordered a Panasonic BLC20 network camera from you on 12 June 2008. It was working fine until recently when it has become unresponsive. The network setup program does not detect the existence of the camera when it is set to wired mode and connected either directly into the computer or into the router. The factory reset button does not seem to have any affect. The routers Ethernet socket lights up when the camera is connected and set to wired and I've tried using a different cable. I've also tried entering the MAC address directly into the setup program and disabling all …

i have a smart2 dvr and would like to know where i can get a new or used psu as the one i have is down have tried every where but no luck

Please advise which PTZ dome camera to purchase with use over Ethernet. Running single Cat5 cable and to possibly view over internet. To cover 60m2 area.

I need to setup a camera focused on one specific cabinet in a bar. The camera needs to be activated when somebody opens that cabinet and shut off when it gets closed or 30 seconds after closing. I have a few cctv cameras already (from a different application and now un-used) but no DVR. I was wondering if there was some sort of wireless magnetic relay activation that could be used with a PC running some sort of recording software. I'm looking for ideas at this point since motion activation of the camera would be ludicrous. I'd be going through 18 hours of video a day to try and find the right 15 seconds. Unfortunately, the location of the cabinet precludes cables to it. A…

Hello I am living in France and would like to install CCTV at home. I had a look in your catalogue on network and I had made some choice regarding cameras and recorder. To be more precise regarding my CCTV project, here below some detail info's. -Camera will be fitted outside, in a protected area regarding direct rain (below roof extender) at 2.5 m far from floor. -Max distance to record (10 m for 1 camera and 17 m for the second one) -Day night recording with auto switch. -1 camera will be orientated to the direct south, the second one to the direct north. -Recorder will be activated by a direct wired alarm loop coming from the central alarm block. -Play b…

Hi i would like to install a CCTV system with 4 cameras. 2 cameras on my house, 1 on my barn and 1 on my garage. I would like a good enough picture for face recognition day and night in case someone is snooping around. I would like them wired to the hard drive in a cupboard recording then a cable to my TV in my lounge which i can turn the channel over and see the 4 cameras. I have been looking at the ESP digiview 4 kit day and night and was wondering if this is up to the job. If not, any other recommendations. Nothing really expensive though!! Thanks Steve Forgot to mention I have a lighting system on the house with 500w floodlights but nothing on the garage or bar…

Hi, I'm going to purchase 4Nos secware HD-SDI 2MP 1080P cameras, and Im also looking to purchase the secware eco 4 channel HD-SDI DVR. I realise that the DVR already comes with a PSU to cope with a single hardrive, but no hardrive is included, I understand that the hardrive I need is to be a sata 2 type but what size will fit it's just you can get two sizes of hardrive one for desktop pc's & one for laptops that is slimmer in size? Also the DVR is Linux embedded so am I right to guess that it's just a case of installing the hardrive with no need to install any additional software for a functional operating system? Also will the secware eco dvr be full…

Hi, I have experience with ZM so I'll use that as my recording/detecting, question I'd like to know which is the best mid range day/night vision IP camera which I'm hoping will be wireless have do you sell most of ? I'd like to be able to control up/down/left/right so I'm guessing it will be a PTZ (haven't much camera experince as I've only used an AXIS 206 IP wired camera) Or what would be your ideal way of setting this up i.e I have computer with ZM installed now need a hopefully discrete camera. I know I've been pretty vague but hopefully will get there. Thanks for any pointers.

Hi, Just tried to setup remote viewing using surveillance client it pics up the ip address ok, then I add it to the group, but when I try the main view option it says the cammeras are not connected to the network, and I can't view anything, anyone know where I maybe going wrong Ive checked the ip and ports on both sides and they match. Also tried to connect using the asee app on a windows phone and it says connection failed, used ip address and mobile port number Cheers Matt

Hello, I am at present using a avermedia DVR card in my computer to monitor an external dome camera with ptz and an internal camera, I can view and operate these cameras remotely over the internet. I would like to upgrade and have been looking at your Secware 4 250GB HD unit that you have for

Im looking to purchase 2 camera kits - Silverline 4 IR External Camera Kit.

Is there an SNT that you can use for 2 Turbo/HD images if you are upgrading the analogue cameras to HD

I'm currently running a sprite 2 hardrive running 16 CCTV cameras. the hardrive inside has died so i need a new one with a DVD/CD re writer and a usb port, is this possible any advice is greatly appreciated.

Hi, Do you have any 240v CCTV cameras, when run an old system and each camera is on 220-240v power with BNC connections? I've seen some cameras that may be the right type but wanted you help.

We would like to upgrade our CCTV system with your Secware Pro 1080 DVR and one Secware Eco 2MP AHD camera to run over existing BNC coax. Is it possible to use the existing (non-AHD) cameras on this box at the same time? or would we need to upgrade ALL the cameras to AHD ones? Thanks for your Help.

Some questions, I looking for 4 pce of camera and one video recorder how can handle those cameras to record videos and save them, recording in loop so the oldest file will be deleted when the disc is full. The camera should be activated by some movement, it would be fine if the camera have some zoom lens so I can use cameras with good pic up to 20-30m, the resolution of image should be acceptable so you can see the sign of car registration on 20m. Please can you help me to fix some package with all things I need for that, and the system should be used in Sweden. I wounder if it's possible and compatibly to bay and use 4 pce of "Secware Pro Bullet IR 700TVL effio-E Camer…

Currently wired a new build for CCTV using CAT6 to each of the 6 camera positions. Please can you advise on most suitable and best value 8ch DVR and cameras that you have available.

I'm requiring a CCTV system involving 2 cameras, a recording device and means of viewing recordings. It will be indoor; sometimes in low light situations. The coverage must be legally enforceable.

I have recently purchased a Secware Eco 2 Mega Pixel AHD Bullet Camera with IR from yourself and I'm having trouble getting it to work on my existing system. This camera is a replay any camera as the Ir has failed. I now suspect the camera may not be compatible with my current recorder could you please advise if I'm correct. The recorder is a Hikvision ds-7204hvi-sh

Interested in dome - cam/4 4mm Does this require a electrical connection to the mains electric? Do we need to purchase additional cables to connect?

Vantage Internal dome cctv camera I have 4 of these cameras and 2 linked monitors. The DVR has stopped working It was a dedicated micros eco4 can you recommend a compatible DVR for these cameras and monitoes the connections are BNC twist

Hi, for the NV-214A-M device, do I need a device at each end of the twisted pair, so that the video feed from a remote camera can be fed into the BNC connector on a Samsung SRD873A ?

Hi, I'm looking at purchasing cameras in order to carry out traffic surveys. They will need to have a minimum 7 day battery life and be mountable to lamp columns.?