admin

Bell-............BELL Bell HO............12v- Strobe +............12v+ Strove - ...........STB SAB Tamper........T The cp8 is a very basic panel and does not iirc have an output suitable

It will be listed in your manual. We cannot put that in the public support forums for security reasons.

i think you may be getting confused with tamper return vs hold off?

But we only offer paypal and bank transfer outside of the UK. This is because we cannot security check european credit cards from a uk system.

Also you can pay by credit card using 3d secure if yiu choose that option. Paypal express checkout is just one of the options available.

i would say its a config or sms string issue not a module issue. If it wasnt working atball then maybe. I would suggest a factory restore and reprogram

Sorry should read 'code is'

You need a panel that supports groups. The veritas is a very basic panel and cannot work that way. You need something like a dimension or even better a siemens spc

it would depend on the ages of the other components. if over 5 yrs old then yes id replace it all. nice looking keypads are subjective. castle keypads are quite rated visually

id look at the enforcer or the visonic. If pro install look at the hkc quantum

yes the pg2 will capture images but will only send to a monitoring station

the mct-303, mct-302, mct-320 are but the sd-304 isnt

I dont understand the question?

you will use one of the programmable outputs programmed as bell for your bell connection. There should be a wiring diagram in the manual for your bells. But personally id of gone for a cqr bell as they are easy to wire up in 2 way.

The programming is similar

some models do, some dont. i need a link to verify. If it comes with a keypad it will be a plastic one

Depends on the device. Id play safe and go for 8 core

your codenis correct? have you made any programming changes prior to it stopping?

the r8 will take a 7A/h but id gof for a 3.4, assuming its enough for the draw. That csn only be verified with a meter

I dont know of a black ip camera, you could use a body camera and spray a housing. We do have black hdsdi cameras though.

you will need to give the sensor power. connect + and - to the aux power terminals in the panel

I would recommend a kband dt in the conservatory, ie 7450 as x band will penetrate the glass more. All modules are the same its just the cases that are different. You can wire multiple modules eol but it wont comply (unless its a galaxy) it would be better to have individual devices on each circuit.

i dont think the spc needs an eol resistor for tamper it should be a 0v return only.

In your environment i probably wouldnt of recommended a scantronic unit but anyway. I wouldnt recommend a pir in a garage due to drafts, spiders etc. You would need a dualtec. However scantronic dont make a wireless dt. I would suggest you use door contacts instead.

You will need a lock and cable to interconnect the devices.