Intruder Alarms

Hi There! Possibly a stupid question but can you tell me if the Honeywell Galaxy Dimension GD-48C with Touchsceen Keypad Kit you list on the site includes the PSU. If not, can you recommend a suitable unit? Many thanks, Grant

Hi, Please can you recommend a smoke alarm suitable for connection to a texecom premier elite that is good for a garage/workshop area? I'm guessing (given use of angle grinders, woodworking equipment, etc) an optical alarm is not a good idea. The garage is also poorly sealed (large gaps around the door) so does get very cold in the winter. I was wondering about the Texecom Exodus RR/4W. It seems to be recommended for places where temperature won't exceed 38C, which sounds likely for my garage. Would it be a good choice? Thanks Joseph

I have an Accenta G3 alarm with two unused zones and would like to extend the alarm into my garage with is inbuilt. There is a single wall (thermal block) between the garage and the location of the alarm panel. I would like to fit a door sensor and a PIR and also fit a very loud sounder in the garage. I have some basic door contact switches and have been looking at one of the 4 way 'sound bomb' sounders. Would these be suitable? what PIR type would I need there are no appliances in the garage. Also is there a cage available for the sounder as I wouldn't want someone to be able to just whack it with a broom handle to silence it? Any help appreciated…

just a quick question might sound daft but need to know never the less. does the secware sound bomb wire into the extension speaker terminals?? ive never worked with these before. ASDGROUP

I have an existing system with a Scantronic 500+ control panel but have no instruction manual. I know the access code but I don't know the engineers code or anything else about it. I have replaced all the batteries in the system but have triggered the Tamper alarm and I don't know how to reset this. If I replace the existing control panel with a new 500+ then: 1. Can I programme this with my own engineer code and entry code ? 2. Can I use my existing PIR's (Type 520r) and keypad (Type524r) ? 3. Does the instruction manual contain all the information I need to do the above ? 4. Is there a simpler solution to my problem ? Thanks in anticipation of some good advi…

Hi i have the Accenta 8 mini. and the keypad is about dead. i am thinking of getting the keyfob. I got a few questions regarding it My keypad is situated on my stairs. and i am going to install the keyfob at the bottom of the stairs. or do the keyfobs have to be on the outside.. Could i connect the Easy set Key fob. whilst the alarm is still plugged in.. As i carnt remember how to set the alarm into diagnose mode so i can open the panel so the alarm dont go off. I installed it like 3 1/2 year ago and cant find the book for it.. any help will be great Thanks

Hi all, im just wondering if the, Texecom Prestige External TD Outdoor Motion Sensor, is compatable with the texecom veritas r8 system, if so how is it connected and can you use the chime facility? thanks daniel

Hi Im looking to install an alarm in a house and im unsure the best place to mount the sensors, and what areas i should cover.

Need external apir sensor with dc input, adjustable on/off times, 180 degrees+ range. Which is suitable.

mMy keypad is faulty on my accenta 8 mini when i searched for the 8EP219 keypad i found it to be obsolete and replaced with the 8EP416. As i dont know what i'm doing can you tell me if its just a straight swap with the wireing?? Cheers MATT

Hi, do you stock a PIR that uses a DC voltage and can be installed outdoors? Thanks.

Can you tell me please if the above panel allows for a timed silent alarm in order to let an TSD1+ Speech Dialler to kick in. Can you also tell me if the above panal comes with fitting and user instructions. Thanks. Derry.

anybody help as to why the is no 13v supply from the circuit board which means no supply to the pirs or door sensors. this is a new installation. all fuses checked ok but no back light to key pad either. I can put panel into engineering mode and day mode but that is all. All wiring has been removed and any links refitted but still nothing from the 13v. hope someone can help!

Hello, We recently moved into a house that has a non functional wired ITEC Meridian panel (prob. 20 years old?). It has power to it but the front keypad does not respond to any key presses, and the alarm it not activated by the tamper switches on the panel door. The last occupiers never used it (over 12 years or so) and did not have any codes or manuals so I was thinking that the easiest solution would be to fit a new panel. I've no experience with alarms but I am an electronics engineer so am happy to give it a try with some helpful advice:) Present zone layout: Z1: PIR on stairs (6 core cable) Z2: Garage door magnetic reed switch (6 core cable) Z3: 5 of GS610…

Any ideas where i can get hold of a menvier ts690r. i have a customer that has one that's gone faulty and would like it replaced with the same. The panel is no longer made so I'm on the hunt for someone that has a spare cheers

Just a quick question do you stock the Risco gardtec 490x control panel with RKP which is same style as the 800 and 816 models. If so how much is it?

Maybe unwisely, I have bought a used SD1+ Speech Dialler to replace a twelve year old model that failed to respond to all the helpful advice you gave me back in February. I have carried out a factory restart, as described in the manual, and have created a 'NEWCODE'. However, when I try to program telephone numbers from 'READY' and press'ENT', the LCD still shows 'READY'! Again from 'READY', if I press 'O' 'CLEARBY' is indicated. But pressing 'B', 'CLEARBY' still remains on the LCD! Please can you help me!

I purchased a Ventcroft Compact Classic Sounder form you recently. Having fitted it though I cannot get the strobe to operate. Everything else operates as it should. I already retrned on but have the same issue with this one. Its connected to a Veritas Compact 8 panel. I have checked and do get 12volts across STB- and 12v+ hold off. Is there anything particular with this panel that I am unaware of.

full Texecom Veritas Excel alarm system After a busy couple of weeks I finally got to installing it this morning. I didn't wire the end station to my field devices just yet, I just linked one of the remote keypads to program my own user codes in. Following the manual, I powered with the battery first and the panel powered up for around 30 seconds but then switched back off (I had just disarmed the panel with the default code and was about to enter the programming menu). I tried powering up again but the panel didn't switch on. I then disconnected the keypad and tried it again with battery and then on mains, nothing happened. No LEDs or anything... The batt…

I have just moved into a house in Windsor that has a Scantronic 9454 system. The previous owner left the manual, but no other information about the system. Can you tell me whether Scantronics is still in business? If they are not, has anyone taken over servicing their installations? If so, would it be possible to arrange an engineer to visit to reset the system and enable us to use it. Hope you can help.

I have a faulty 9448+ style panel, could anyone advise me on a like for like replacement so i can undertake to job myself, many thanks smash0007.

Dear Sir / Madam. I am looking at replacing my aged Yale SA5 alarm system with a product from your company and i was looking at the Scantronic i-on40 with wired kp's for a solution. Does the system allow Remote turn off via a PSTN network or over the public internet via a login.If not could you suggest a more appropriate solution. Thank you for your time. Regards Paul

Can I buy DSC powerseries 1832 Panel and accessories from you ?

Hello from Germany, I am going to buy a home-security-system from your shop and need some information on programming and controlling the system via PC. There is the Scantronic homelink 75 which seems to be connectable to PC via USB is there a control-software included in your package ? And second the Risco Wisdom - nothing to see about PC-connection and Software in you shop ? Would you please inform me about this two sets, thank you and regards Helmut

Hello! I'm about to order the following items and I'd like to know if the batteries are included or not; in case I need batteries could you please tell me which type? ADM-DOM-SI - Domonial Wireless Internal Sounder KTC 805 - Honeywell Domonial Keyfob DO800M - Honeywell Domonial Radio Door Contact Thank you very much!