Intruder Alarms

Hi I have been going on at my folks for years to get an alarm system. My father is competent with electrical wiring, but I am clueless with alarm systems and compatibility issues. Can someone kindly reccommend a system or components for a system to cover the following specification that I've worked out: Bell box - tamperproof, foam resistant Internal audible quad alarm (my father is semi deaf) 4 pet friendly pirs - one fat labrador 100 m white cable Control panel - that can programme the four zones, door contact and garage contact - all armed for vacant house or some armed for occupied bedtime/overnight User friendly Lcd keypad (large text display if possible) t…

support/Elaine, is the 2.1Ah rechargeable battery included with 9448EUR-95 STYLE? thanks

Hi, I self-installed a Euro Mini about a year ago. I have two keypads installed, one upstairs and one downstairs. It's been working fine since I installed it but now its giving me error 485 COMMNS LOST. Neither of the keypads respond. If I open the panel box or the keypad to fault find, the tamper alarm will sound and I have now way of overriding it! 1. Any ideas what would cause this problem (error 485)? Does the keypad or panel have a keypad fuse? If so would a blown fuse cause this error? 2. Without a working keypad, how do I override the tamper alarm? Thanks in advance.

i`m looking to install an alarm into my 3 bedroom house. i`m going to fit my self and then get the electrician in to connect the power. i`ve been browsing through and quit like the sound of the veritas 8+. is this a good alarm and easy enough to fit. i have basic knowledge of electrics. any suggestions or comments would be grateful, thanks.

Hi I am trying to get an MRnode to connect to an M800 all wired up and everything seems ok, it is detected on start up. I am removed the cover of the MRnode pressed the select button to go into learn mode, and tried to link a 702 wrist transmitter all seems correct, one completing the learn I have put the cover back on to take the MRnode out of learn mode, but as soon as this happens I get an alert from the panel saying Lost device (or something along those lines) and the MRnode doesn't show on the network! Any ideas?? Thanks Richard

We have a Verista 8 system installed in our house. The previous owners didn't leave the manual and now the tamper light is on and alarm does not sound. Can anyone help?

Hi, Thanks to this forum I've picked up some usefull ideas for my future home alarm. I was wondering if someone with a little more experience could tell me if the following things work great together?: 1x Texecom Premier 48 7x Texecom Prestige AMDT Plus pir 14x Elmdeme EN3-QSC Grade3 medium surface contact with red resistors 5x CQR 8 core screened 100m 1x Texecom Odyssey 5 dummy 1x Texecom Odyssey 5 cover 2x Texecom Premier Large LCD keypad 1x Secware RS002/ALI 2x Secware 2way sound bomb 8x Elmdene EN3 10way junction box 1x Enersys 12V 18A/H batt 1x Secware Bcintra/w/b Also If I wanted to connect lets say 3 smoke detectors? Do I just connect them…

Hi, I am looking for some help and advice with selecting an alarm system for the house I am currently renovating. It is a four bedroom house with an external garage which I would also like protecting. I would prefer a wired system as from my experiences at work, I am not fully convinced of the reliability of wireless technology! I am nearing the first-fix stage so now is the time to start planning the alarm system. I am an industrial electrician and plan to install it myself but I have no prior experience of alarm systems or installation. Here are my thoughts so far: 1.) A colleague recommended Bosch Blue Line BLD-P sensors, what do you guys think? Would one of these…

Hello I have recently installed a Eurosec CPX system and was wondering if you have to add eol resistors to standard secware SC517 door contacts? Thanks in advance

Hello SecurityWarehouse I still havent got a bellbox for my system yet (Accenta G4)... I was thinking of getting one that is hardly visible and I wanted quality so I thought of Texecom! I have been looking at their Odyssey's and I think the 4E does just that. On your website, you have the Odyssey 4 and the Odyssey 4E live backplates in either clear or blue. If I was to get a "clear" 4E live backplate will the strobe lens be clear along the outside or blue? Basically the strobe is around the edge of the unit and I would like to know if that wrap around strobe reflector blue or clear? Its just i've seen pictures and some…

CAN ANYONE TELL ME IF THE 8EP416 AND THE HWLEDKP IS COMPATIBLE WITH THE ACCENTA 8 MINI. ITS ABOUT 11 YEARS OLD

Hi, I seem to have my Gen 4 almost working as desired with my existing BG (DSC) equipment, however for the life of me I cannot seem to get the strobe light working. The Bell will work but not the strobe. The existing bell box wires where listed as (+) Red, (-) Black (which I have hooked both of these up to the bell connectors), AUX = Blue and Strobe = Green. Any advice/suggestions would be greatly appreciated.

hi can you please tell me if you get full programming book with this panel. thanks

Hi i tried to part set the accenta Gen4 as described in manual , but when trying to set the system, only i can set programme one , it is said in the manual that while setting the system after entering the code we need to chose the program ( 1,2 or 3) , but it is not comming up. please advise? regards

Hello, I am looking to reset the 4 digit code on a Honeywell Domonial wireless alarm, does anyone know how I can do this? Thank you, Alun

Hi folks, What size battery would I need for the above Panel? What Texecom smoke detector would you recommend for use in a house? What surface mount door contacts are compatable with this panel? Thanks in advance Chris

hello. can anyone please tell me wwhere i can get the software from for my laptop to be able to programme a Honeywell Galaxy Dimension GD-520C thanks

Please can anyone help with the following re. Intruder Alarm system Scantronic 9800+. (9827) In brief, there is a code showing as bF which I understand through d/loading the User manual means: battery fault on the control panel. The alarm has been going off several times a day for nearly a week and I disconnected the ringer several days ago but am too worried to open up the control panel in case it then goes off again and I can't press the code to stop the noise once the faccia is removed. However, I need to see inside in order to know what type of battery I need to buy to replace the present faulty battery. Any assistance would be much appreciated, Thank you, Tum…

Please can anyone help resolve this problem with Intruder Alarm system Scantronic 9800+. (9827) In brief, there is a code showing as bF which I understand through d/loading the User manual means: battery fault on the control panel. The alarm has been going off several times a day for nearly a week and I disconnected the ringer several days ago but am too worried to open up the control panel in case it then goes off again and I can't press the code to stop the noise once the faccia is removed. However, I need to see inside in order to know what type of battery I need to buy to replace the present faulty battery. Any assistance would be very much appreciated since I h…

I am currently using standard 2 wire (common tamper) and have linked the unused zones which seems to be working but the engineer manaul says 9(eol) wiring is more secure, I am thinking of changing it to use eol wiring(I am using eurosec PIR without fault or mask terminal), if I do this then it would leave me 2 unused zones plus unused tamper(which becomes 9th zone), do I need to link them as before or do I need to link them using some 4k7 resistors as the other zones? also in the engineer manual it says you should select 9(eol) in the wiring option(page 23 of manual) and then normal (standard gardtec wiring configuration without mask or fault detection) but then it says i…

can you please give me the dimensions of this speaker? thanks

Hi, System ADE Poly Gen4 with LCD keypad Is there any way in which I can permanently enable the LCD and Keypad backlight on the Accenta Gen4 LCD Keypad. The current default state is that they illuminate for about 30 secs following a keypress. My previous ADE system (LED Keypad) had backlit buttons on all the time which I found quite helpful. Bob

Hello I have installed system now, only one Magnet contat for Door entry.(Elmdene EN3-LSC) I've done programming. Disable all but door contact. When arming system: Door 'n Hall fails. System don't arm, only beeping( Program 1 set). Walk test gives 0 to Door What's wrong: is my door contact wrong kind, maybe false wiring or missprogramming ? Please help ! Respect !

happy new year to everyone! I am programing the panel but not sure which zone type to select for lounge and other areas as there seems to be quite a few to choose from (alert, 24, monitor, ext/en etc) can someone please help me with what they all mean in cpx. I know what a ext/en is and I have selected my front door one as ext/ex but now sure what should others come under, I just want the others to fire when the alarm is set. a programing/engineer manual would be handy if anyone has got it please thanks

I have recently installed risco CPX control panel and have done some programming but it would be nice to have a manual/guide which describe every options in details, has anyone got any guide/manual please? How do I change the master default code of 5678? I have managed to changed the engineer default code from 1234, now when I enter the master code the alarm sets off even though I say "NO" to set system option, any idea what wrong I must have done? thanks