Intruder Alarms

I'm looking for a domestic alarm that supports 2 zones (one hardwired (ground floor) with 4 PIRs, one wireless (first floor) with 3 or 4 PIRs) + 2 keypads + keyfobs + a control panel that can dial out (PSTN or other). What can you recommend which is good value for money?

HI can you tell me when or if you will have the new Agility panel from Risco. Thanks

Hi I need to default and reprogram an Avanti LC 8 zone alarm panel, it has an LED remote keypad and plastic end station. Building has been empty for some time and it was completely powered down. We have no record of any of the previous codes....anyone got an installation manual please?

I have PowerMaxComplete. In page 13 in control panel i have make readings for Serie nummer. 51001.3670 JS 701049 V1.1.05 JS700421 V1.0.02 Please advise suitable siren and smoke detector.

Hi, I have recently naively purchased and installed a powermaster 33 alarm unit along with the IP Powerlink 3 module and a camera PIR. I thought it would be as simple as install, get it working, attach to the network and link with the app. I see this in not the case. Can anyone point me in the right direction? I have done some more googling and found from the visonic website links to the powermanage and powermaster interactive side of things. They mention having a CMS or remote management company... I just want to run some software from my Mac(which is on all the time) and access via the app... Any advice grateful Thanks

Hi, what pir would you recommend to cover windows inside a curtain, that wolud able to be set when a person is moving around the house. I do not want to fit inertia shock sensors on the windows.

Can you please advice me on what system i shall use? I'm out after an alarm system that has at least 3 zones (1 for intrusion, 1 for fire, 1 for water leakage) for a 2 story house, preferably which own output channels and which is possible to connect to the internet. Maybe for intrusion i should have 3 zones, like inside, perimeter and outside? Sensors i will need are: Burglary (movement - with windows breakage?), fire sensors and water leakage sensors to put in sensitive areas. I have been looking at the honeywell which seems good, but can you please give me some suggestions on good systems?

Hi All, I have a Galaxy Flex 20 panel installed with x10 PIR's, x2 door contacts, SMS & ethernet module. I need somebody with Galaxy Flex knowledge to commission all of the above (including GXRemote app). Please PM me if interested with anticipated costs. Cheers G

Have Risco removed the ability to show the status on the LCD keypad? I've made sure that the Keypad is installed onto the system, but when I go into the Programming Custom Screens menu, It shows LCD Status = None. When I say NO, it just moves on to LED Status, and doesn't give me the option to change the setting to Full (for status always on) or Set/Unset which it always used to!! Is there another setting I need to alter first before I'm allowed to change the "display the status" setting?? Any help appreciated

hi i had a security company around my house the other day and they said i needed 6ea.- Optex RX-40 PT a magnetic reed contact for front door would the item below be suitable 1ea.- CQR Freewave Universal Door Contact and a oml-dt-x6 quad passive infrared detector do you have one of these and would al of these sensors work on the control unit 1ea.- ADE Honeywell Accenta Mini Gen4 with LCD Keypad would like to order this immediately

Wondering if the Knight Double Push PA Stainless Steel is a Grade3 or if you have any grade3 buttons in stock? Also, rough idea of P&P (2.1kgs)to Republic of Ireland for 3 PA Buttons 2 Viper GLX 1 Calibration tool

Hi, My friend has gone away and has had a power cut. She has a Scantronic 9448+ alarm system. The front panel is 9427 style. We can not reconnect her power as the alarm keeps sounding off. How do we re set her alarm in order to turn her power back on?

I want to place an order. We would like to change our G2-44+ for a GD 48. First i want to ask, can we move the settings from the G2-44 to GD 48 or do we need to set all settings when install? Can we buy a RS232-wiring and do it from a computer or do we need to purchase a sw to do it? Or is it free from honeywell? If not free, can we program all from the MK7?

Hi, I have just received 5 x Pet Detectors PIR's (Texecom Prestige). Why don't they have brackets? The Prestige DT PIR's that I ordered a while ago from elsewhere came with brackets, so I assumed these would. Even the blurb on the box's suggests that they include brackets, although a sticker has also been placed on each box to say that they are available separately? I appreciate that some might not recommend brackets for installs, but for this particular job I wanted them... Any ideas..... Thanks, Chris

Hello, I've just unpacked my second Sterling 10 remote LCD keypad, and found out that the little spring on the tamper switch is missing ( order 19838 ). this causes continue "Tamper" alarm on my central unit. Is it possible to send me a spare spring? Best regards, Robert.

I have installed the door contact (to replace one that ceased to operate). I have followed the "deleting" and "learning" instructions for my 500r panel and acheived the "double beep" to indicate that the panel has learned the code. However when the panel is "set", although all other sensors set off the alarm when activated, the door sensor does not activate the alarm on door opening or tamper (the led on the sensor does operate). Please advise what my next step should be.

HI there, I just need to have a chat about order a, x1, Honeywell Panel with key pad, 8EP396A x4, PIRs, pet friendly x1, door sensor x1, Informer Speech dialer 8EP276 x2, Mains smoke alarm linked, prefare AICO x1, Mains heat alarm linked, prefare AICO x1, 100M alarm cable. Is there a kit that can cover the above?

I am looking for a engineers and user manual for above panel, can anyone help?

Hi I am considering helping a friend upgrade his old system which I believe is a Menvier TS700. Under consideration is a Scantronic 9752 from yourselves which I see comes complete with a keypad and is attractive because it comes with the option for wireless expansion. First question: are there any alternatives you might suggest against this choice and Secondly: Please could you point me to a copy of the installation/programming manual for the 9752 so I can have a preliminary read through. Kind regards and thanks Steve

Hi, hoping you can help. Following a recent burglary thought I'd try and fix my alarm system! I've currently got a 12 year old Optima system that doesn't really work. Wondering if a new battery would fix it, or should I simply replace the unit with an upgrade? I have a number of wired sensors around the home, not sure if I should replace or keep? External sounder may also need an upgrade, as well as placing an additional box on the front of the house, not sure if I should fit a dummy box,or wire in an additional sounder? Added consideration, I would like to alarm my garage, thought I could use old box? but would need door sensors x 3, as birds get in etc. I'm basically wo…

How do these watches operate pleae. I cannot see any buttons on side, do you press the pad which is the face of the watch? Thanks for your help

i am after a scan 9943 with 5 or 6 remotes. Will the keypad pair up ok with a 9930. How much is a 9941 & 9943 & fobs

I have just purchased a Honeywell IS3016 security alarm sensor which does not appear to work with my existing alarm system showing as a fault on the control panel. It would be very unusual for the sensor to be faulty and assume there is a compatibility issue. the only item I can think of is the EOL setting which I have not encountered before and not aware of selectivity. I previously purchased from you the Honeywell Active8 DT which worked fine first time. My alarm system is an Accenta 8 Can you advise me what the problem may be or EOL settings.

Hi All, I have a Pyronix V2 GSM dialler. Previously I could dial into the V2, enter the User Code, then enter the remote control menu. I have not changed any settings, but the User Code is now not being accepted when dialing in (the system voice just requests multiple times for a User Code to be entered, then it times out). I have checked: - The User Code still works when entered directly into the V2 using the keypad. - Status SMS messages are still responded to in the normal manner. Any suggestions as to what the problem may be? Many thanks in advance Mike

I have recently purchased gd48 from secware i am struggling to connct bellbox to honeywell gd48 , i dont see the panel pinouts goes to the bellbox can engineer please give me the pinouts for honeywell bellbox