Intruder Alarms

Hi, I wonder if you can help. I have an alarm system Networker ((Menvier) TS690R and need some additional wireless pir sensors. From what I can see they don't make the alarm system any more, but looking at your site it appears the Scantronic pir's maybe compatible?

gard-tec cpx but not sure if it has the facility to listen to hear or speak through the speechdialler?

My Pyronix vocaliser has lost it's speech but still dials out upon activation. Also I cannot edit the the numbers it dials.What is the best replacement dialer/speech vocaliser I can replace it with or would a NVM chip replacement resolve this issue?

The keypad panel on my Flex 20 is showing a series of stars. Whilst I was away we had a thunder storm which knocked out my internet (it impacted the router). It also appears to have knocked out the intruder alarm, which sat next to it. When I went to check it there was no power coming out from the panels 15v power supply. I subsequently plugged in a 12 volt one which powered up the alarm and the keypad, which is now displaying a series of stars / asterisks, and is non responsive. I assume this is because the alarm system needs 15 volts to fully function and the batteries have been completely discharged (checked the one on the control panel and it was down to…

Am i right in thinking the internal sounder should sound along with the external when the alarm is triggerd? since mine doesnt, all it seems to do is the chime facility. daniel

In some reason dialer installed at customer site is not working properly. Condition of test I did: 1) Dialler installed next to Master BT socket 2) Line is connected to "Line A" and "Line B" on the dialler 3) BT socket connected to "Tel A" and "Tel B" on the dialler 4) All devices disconnected from BT socket (eg Telephones, Card Payments Machines, Routers) After alarm is triggered I get the below in random order: 1) Sometimes I receive phone call from dialer and there is just silent for about 60sec 2) Sometimes is just message to press confirmation code. Without main recorded message. 3) Sometimes there is silence for about 15-20sec and than I hear My re…

Hi, I have recently installed electrically operated automatically opening curtains. These are triggering my alarm if it is set when the curtains open. Can you recommend a different PIR to the one above which will get around this problem please? Thanks

if you tech guys could answer this question for me it would be good. i have a customer who wants a small intruder alarm system in his outbuilding, im looking at using the scantronic 9651 en. what the customer does want tho is a chime function on an external detector (so he knows when someone is approaching when he is in the back room) this detector does not want to be on the alarm system when set. can it be programed as not used but still with a chime? or am i going to have to put a smaller panel up to (scanny 9488) just to use the chime function and to keep it seperate from the intruder alarm? hope this makes sense ... and i hope you can help. regards ..H

Which hardwired detectors (PIR-movement detector, magnetic contact, siren, smoke detector and siren) are compatible with the powermax+ unit?

Hi there I'm thinking about installing the Telecom Elite Premier 48 in our home and I'd like to use the Connect communicator module. This module requires firmware version 4 but the SW website indicates that control panel is supplied with version 3. Is this the case, or is the website out of date? If it does come with version 3 then can it be upgraded and how? Are any extra parts such as PC communicator boards required? Many thanks Guy

Would any one have a manual for the panel. The one I'm working on is about 8 years old. Cant find a manual anywhere, want to check the manual before I condemn it! Thanks

I have a Veritas alarm believed to be the r8 which is around 12 years old and ready for an upgrade. Is it possible to use the lcd keypad as an additional rkp on this unit or do I need to stick with the original keypad with led's? Helps would be appreciated. I don't really want to upgrade the main pcb etc. Thanks.

Intrested in an Honeywell Domonial control panel with an LCD Radio Keypad c/w built in prox reader. I have some questions below... Is battery included in control panel? How much for an GSM-module? Is it included an "real" installation- and configuration manual? - if not, can I buy it from you? I read at Honeywell that the latest version seams to be "CME8UK-STD-7G" - is that the same version that you deliver?

I'm looking for a domestic alarm that supports 2 zones (one hardwired (ground floor) with 4 PIRs, one wireless (first floor) with 3 or 4 PIRs) + 2 keypads + keyfobs + a control panel that can dial out (PSTN or other). What can you recommend which is good value for money?

HI can you tell me when or if you will have the new Agility panel from Risco. Thanks

I have PowerMaxComplete. In page 13 in control panel i have make readings for Serie nummer. 51001.3670 JS 701049 V1.1.05 JS700421 V1.0.02 Please advise suitable siren and smoke detector.

Hi, what pir would you recommend to cover windows inside a curtain, that wolud able to be set when a person is moving around the house. I do not want to fit inertia shock sensors on the windows.

Can you please advice me on what system i shall use? I'm out after an alarm system that has at least 3 zones (1 for intrusion, 1 for fire, 1 for water leakage) for a 2 story house, preferably which own output channels and which is possible to connect to the internet. Maybe for intrusion i should have 3 zones, like inside, perimeter and outside? Sensors i will need are: Burglary (movement - with windows breakage?), fire sensors and water leakage sensors to put in sensitive areas. I have been looking at the honeywell which seems good, but can you please give me some suggestions on good systems?

Hi All, I have a Galaxy Flex 20 panel installed with x10 PIR's, x2 door contacts, SMS & ethernet module. I need somebody with Galaxy Flex knowledge to commission all of the above (including GXRemote app). Please PM me if interested with anticipated costs. Cheers G

hi i had a security company around my house the other day and they said i needed 6ea.- Optex RX-40 PT a magnetic reed contact for front door would the item below be suitable 1ea.- CQR Freewave Universal Door Contact and a oml-dt-x6 quad passive infrared detector do you have one of these and would al of these sensors work on the control unit 1ea.- ADE Honeywell Accenta Mini Gen4 with LCD Keypad would like to order this immediately

Wondering if the Knight Double Push PA Stainless Steel is a Grade3 or if you have any grade3 buttons in stock? Also, rough idea of P&P (2.1kgs)to Republic of Ireland for 3 PA Buttons 2 Viper GLX 1 Calibration tool

Hi, My friend has gone away and has had a power cut. She has a Scantronic 9448+ alarm system. The front panel is 9427 style. We can not reconnect her power as the alarm keeps sounding off. How do we re set her alarm in order to turn her power back on?

I have installed the door contact (to replace one that ceased to operate). I have followed the "deleting" and "learning" instructions for my 500r panel and acheived the "double beep" to indicate that the panel has learned the code. However when the panel is "set", although all other sensors set off the alarm when activated, the door sensor does not activate the alarm on door opening or tamper (the led on the sensor does operate). Please advise what my next step should be.

HI there, I just need to have a chat about order a, x1, Honeywell Panel with key pad, 8EP396A x4, PIRs, pet friendly x1, door sensor x1, Informer Speech dialer 8EP276 x2, Mains smoke alarm linked, prefare AICO x1, Mains heat alarm linked, prefare AICO x1, 100M alarm cable. Is there a kit that can cover the above?

I am looking for a engineers and user manual for above panel, can anyone help?