Intruder Alarms

Hi, I'm looking at installing two alarm systems for elderly relatives due to recent break ins in the area and wondered what you could recommend with the following criteria. Property one: wireless system with either prox sensor built in with the possibility of adding a remote one or control panel with two remote prox key pads. 3 wireless magnetic door contacts. 4 wireless PIR wireless external sounder. Property 2: wireless system with either prox sensor on control panel with the possibility of adding a remote one or control panel with two/3 remote prox key pads. 2 wireless magnetic door contacts 4 wireless PIR Wireless external sounder. These systems need to be very…

What is the minimum signal of digi gprs to be considered good

The wiring diagrams are unclear for connecting the panel to the external sounder/bell box. The connections on the bell do not relate to the bell instructions. Can you tell me how to connect the two. On the ADE GEN 4 panel i have..... STROBE +VE STROBE -VE T A D B On the bell i have..... ST- R- SW- V+ V- Please tell me what connects to what........

Hi, I have a fully wired house system. I need to add another zone to a remote building, a garage, and to run a cable is not really possible. Can you recommend a wireless add on Tx/Rx. The zone will have just two door contacts which can be wired in series. the garage does have mains power if required. The garage is about 80 feet from the panel and has direct line of sight, that is to say no major structures to weaken the signal. many thanks

Can one of the speed diallers you sell be connected to your ADE Honeywell Optima Compact Gen4 panel?

This kit does not show a power supply, how does the system get its power?

Hallo, As a potential customer(self employed) from Germany I`m interested in one of your intruder kits Visonic Powermax+. I would like to know if for the time beeing offered kits are working in the 868 Mhz frequency band and have phone (dig/analog ?) interface. Also if 1 (one) piece of a 868 Mhz Powermax+ kit can be delivered to Germany (paying by PayPal). They are respectevely specified with a weight of 0,2 or 6 Kg; how much would cost dispatching+delivery to Germany for each.

is it possibe to part set a system, silently, using a Honeywell easy set with key fob. If not , how is this acheived. I want to set/ unset the ground floor from the first floor, in the quickest and quietest way.

I have an Excel box with a standard LCD keypad which all works fine. I want to add a second keypad and it’s from the Premier range (with key fob) but I can’t find anything that says it’s compatible . It uses the same four connections but has additional connections for two zones too. Does anybody know if the Premier keypad is compatible with the Excel box

We have a Visonic WR200 (418) receiver that in turn connects a hardwired alarm panel; this receiver is used to link another panel in a separate garage. We

Hi, Can you advise on a simple and robust wired alarm for a cold and damp Scout hut. I will be installing it myself but I don't expect major problems with that side of things... We need: 5 PIRS 1 key pad 3 door detectors 2 external bells (preferably) 1 dummy box 1 internal sounder and about 200m of cable No need for distinct key codes or anything like that. Thanks

ooking to buy a Secware Basic Full Kit Accenta, 2x PIR, 2x Contact, 1xSAB Need extra RKP and door contacts. Could you please advise which parts are the same as the kit

I can't find any Wired Siren for my Powermax Complete alarm. Do you have one, or could you recommend one?

I am looking for an addressable Intruder Alarm System. I have already passed a 2 core power cable and 4 core looping from each PIR. Can you please guide me to find the correct system? I also need to connect an access control system with the intruder alarm system. Will look forward to hear from you. Thanks and Kind Regards

Hi do you have a comms lead for the 9850 scantronic control panel 8 pin ? we have the 9800 12 pin version as shown on your site Many thanks

The sounder on the control panel works correctly but the remote keypad emits no sound at all when being used to set the system. Is it a setting problem, a wiring problem or a defective remote keypad?

This topic has been moved to Website Issues. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=456.0[/iurl]

I wonder if you could help. I have a number of Aritech GS610 window sensors fitted in my home but they are not connected to the alarm box. could you tell me please which of thr 4 wires are power supply and which are sensors?

I have an 11 year old scantronic 9930 fitted professionally and serviced. I am about to purchase a replacement keypad. However with regular power cuts here my alarm now triggers outside bell very quickly and will not go off for 15 minutes, i cannot reset. Also the display shows better missing even though it's not and i have checked all connections which are fine, also the battery is reading 12volts on tester. The only thing i noticed was split at bottom but, NO leaks ?? so why is it showing message and a 12volt reading on tester. Can you advice please as i don't want to waste money on keypad and battery if it is something else.

Hi All, I have an old Siemens IC60 panel with 3 wired keypads, 3 wired sensors, plus some wireless stuff (Sensors, Smoke detectors, keyfobs etc..) I also have some z-wave and 433 home automation stuff running under vera edge and domoticz. I am looking to upgrade this to something more modern. My main requirements: - IP connectivity so I can monitor remotely - 3 wired keypads - Images / video on movement when armed - but want to avoid standard IP WIFI cameras inside my home. - Easier to arm / disarm (RFID, keyfobs, Bluetooth proximity etc) - Ability to view video / images without a phone - If I am in bed, and the alarm tr…

Hi Im looking to connect a module to an intruder alarm to send a signal to a panel when the alarm goes off. Is this possible with something like the Flex trigger module?

I plan to buy an Optima Gen 4 security panel and would like to know what size battery/part number this unit takes so that I can order this at the same time.

Purchased a 760ES and has the following problems; "The Siren is proper teached to the Control Unit with a high signal level. The Control Unit respont correctly to the two tamper switches wehnever they will be activated. The Siren dosen`t sound and flashes. It also dosen`t sounds when the Batterie will plug in. (referring to Info on Page 3 Installation Guide) It doesen`t sounds and flashes when the tamper switches will be activated." Can you confirm if the Siren would be faulty?

Good morning, I've bought a GalaxyFlex and a RF Portal from Honeywell which work like a charm I would like to add some Wireless shock/vibration sensor with Door Contact in my house. I've bought the "Honeywell Le Sucre Wireless Shock Sensor with Contact White" ( Model: SHKC8M ), but it's quite big. I would prefer something smaller, more discreet , like the Honeywell Wireless Door/window compact magnetic contact Brown ( Model: DO800M2 ), but with the shock sensor feature Could you advise me another product (shock + contact) which would be compatible with the GalaxyFlex ? Thanks in advance for your help Cedric

Hi i would like to buy the gardtec 595 with 5 motion detectors and a siren which should be high dbl? What is the price for the system and will you deliver it. i would like the fobs with it and the card to arm it and dis-arm it too, does this come with the kit? Can you give me full price with delivery? Regards