Intruder Alarms

I'm seen your texecom starter kit - New Texecom Ricochet Kit 2 64 Zone Wireless Kit with Sounder. I want to buy a texecom direct wired bell box. Can I wire that into the control panel for this kit or will it only work with a wireless bell box? Does the Texecom AEB-0001 Impaq Plus Shock Sensor Grade 2 work with the New Texecom Ricochet Kit 2 64 Zone Wireless Kit with Sounder. Also is there an option to have the system txt me when its set off?

I am looking for a SIP dialer module that will work with a Honeywell Galaxy alarm system

Do you stock GS611, or GS711, or any similar shock sensor that works with analyser mod, preferably with integrated reed switch, in brown? All I see in the online store is in white.

You sell them @

Hello, I have a 3 bed semi and wish to replace my troublesome old alarm for a DIY alarm system upto

Can any one tell me is there such a thing as a window contact+vibration sensor combined (hard wired) if so what is it called and who makes it, seems a pity to have to fit both if there is a combined unit. thanks again for all your help

have you any in stock that are compatible with the scantronic 500r - 2 pirs, 1 remote setting device, 1 door contact, 1 wired bell/siren external

i've been looking at these keypads here: http://www.securitywarehouse.co.uk/catalog/texecom-premier-elite-keypad-p-2481.html You talk about SMK and FMK, is this kit suitable for either surface or flush mounting?

hi, just looking at putting an order together, looking at veritas 8 excel with prestige detectors and 3e bellbox, not sure which door contact are suitable though, any help would be great. the doors are upvc. is this a decent model or would you reccommend something else. it is for a diy installation so looking for something that isn't too complicated. i;e what is eol cheers

Hi! I am interested in the above kit, will it conform to grade 2 EN50131?

I need to purchase an alarm system for a small basement office. I need three PIR, one door contact, one bell box then I would like to purchase Menvier M Series plus a dialler. Can you please advise what I need on control panels (1 needed) and the main box? I have cable. Thanks

Trying to find a good quality PIR sensor for lighting control. Just to turn on about 200W of lighting for, say, 15 minutes when persons detected during darkness. One sensor, one output. Min range 30m. (It's for use in a churchyard.) Ideally a stand-alone unit, but could be a PIR head plus power supply / relay unit. I don't need manual overrride, timers, etc. If I used one of these, what additional kit would be needed? https://www.securitywarehouse.co.uk/catalog/opal-xl-12v-pir-35m-p-642.html Similarly, for this one: https://www.securitywarehouse.co.uk/catalog/voltek-single-head-external-sensor-long-range-black-1804lrb-p-1532.html Thanks.

Just purchased a Secware 2-way sound bomb from you. I have a Scantronic 9448+ Intruder Panel, what connections do I use for the two wires?

I have an old ADE Logic 6 wired control panel that I need to replace. It is linked to 3x wired PIRs and 3x wired door switches and I would like the replacement to have remote access via wi-fi link to my local router and suitable app. Can you suggest replacement that is not too complicated or expensive? Thanks David

I want to order an ADE Honeywell Optima Compact Gen4 box, can you confirm that the Enersys 12v 1.2 A/h Battery is the correct type for this unit.

Hello - in the description to "Knights Plastic Single Push Panic Attack Button" you mention the CQR product "PA Plus" panic button. I am looking to purchase the model with LED and double-push action. Do you carry this item? Thank you

I want to buy the new Honeywell Galaxy Flex - are you able to supply it in a package like you have done for the "Honeywell Galaxy Dimension

Really need some help before I loose all my hair. Trying to set up premier 24 with 4XP expander. No matter which setting I use for the Address switch I can't get the expander to register as installed, just as 1 or 2 extra keypads. Any Ideas? Thanks in advance

I purchased from you last year a optima 4 replacement panel as my existing panel stopped working. Now my external sounder is so quiet you can hardley hear it, Please can you advise if this could be a fault within the panel or is it the sounder itself. I have checked all connections and they are ok

I recently purchased 1811lr 40m range twin sensor from you, this came without a control unit. Can you please advise what other equipment I require for this to work with my existing light

I require an alarm system that has the capability of giving 2 outputs to a relay to indicate Set/Unset and Alarm sounding. there is only a requirement for 4 zones (2 door contacts and 2 PIRS), an external bell box and we need 2 keypad i have been looking at the Texecom alarm systems as we are familiar with these. can you advise which model would give me the above requirements.

Hi i should replace a smoke dectors for a DSC alarm. It's a FSA-410CS, what should i replace it with?

Hi, Will I have any compatibility problems if I buy the controlpanel (powermax+ or powermax pro) from sweden and all the sensors from UK? I would like to have the speech and text in swedish. Could I even mix my setup with sensors from sweden and UK? Does any of the powermax(+/pro/complete) controlpanels support swedish language? regards Olof

I'm looking for a recessed sensor for an alarm, needs to be unobtrusive as possible,

Pyronix V2 GSM. I have 4 different voice messages on 4 different inputs. On activation of any input the first number is dialed, answered and accept code submitted.When the call is ended the dialer recalls three more times with the other three messages and the accept code has to be entered for all three.How do I stop the dialler making 4 calls for everyone alarm