Intruder Alarms

I have just moved into a new house that is installed with a scantronic 500+r alarm. I want to turn down the volume on the internal alarm that goes off when you set the alarm, how can I do this?

I have an old ADE Logic 6 wired control panel that I need to replace. It is linked to 3x wired PIRs and 3x wired door switches and I would like the replacement to have remote access via wi-fi link to my local router and suitable app. Can you suggest replacement that is not too complicated or expensive? Thanks David

Is it possible for the main board to become wiped?? The alarm has been installed and was working fine for 2 years until a kitchen refit company decided to cut through three of the cables. (the cable between the control unit and the key pad was NOT cut) I've reconnected the cut cables, and initially the display read "Fuse/Bat Fault" - sure enough the Aux1 fuse had blown so I've replaced this. Now the remote keypad will light up when you power on, but there is no text on the display. I've checked the 3 fuses again, and that there is power to the PCB (17v) and that the power is reaching the keypad (12v) Any ideas on what else to try?? Could a wiring …

Do you stock Honeywell ECO1002A smoke detector for adding to Honeywell control panels?

I want to order an ADE Honeywell Optima Compact Gen4 box, can you confirm that the Enersys 12v 1.2 A/h Battery is the correct type for this unit.

Hello - in the description to "Knights Plastic Single Push Panic Attack Button" you mention the CQR product "PA Plus" panic button. I am looking to purchase the model with LED and double-push action. Do you carry this item? Thank you

I want to buy the new Honeywell Galaxy Flex - are you able to supply it in a package like you have done for the "Honeywell Galaxy Dimension

Really need some help before I loose all my hair. Trying to set up premier 24 with 4XP expander. No matter which setting I use for the Address switch I can't get the expander to register as installed, just as 1 or 2 extra keypads. Any Ideas? Thanks in advance

I purchased from you last year a optima 4 replacement panel as my existing panel stopped working. Now my external sounder is so quiet you can hardley hear it, Please can you advise if this could be a fault within the panel or is it the sounder itself. I have checked all connections and they are ok

I would like to replace the motion detector on this very old Scantronic 9200 system. Can you recommend one that is compatible?

last year bought Honeywell ADE LCD Accenta from you website want to add: Honeywell Hard Wired Carbon Monoxide Alarm Honeywell Combination Optical/Thermal Smoke Detector (58°C~) Honeywell Combination Rate-of-Rise/Thermal (58°C)Smoke Detector. are the above compatible and do I need bases for the fire detectors and can I add a 12Volt 7Ah battery instead of the 2.3Ah exernally (outside of the panel)

I recently purchased 1811lr 40m range twin sensor from you, this came without a control unit. Can you please advise what other equipment I require for this to work with my existing light

I require an alarm system that has the capability of giving 2 outputs to a relay to indicate Set/Unset and Alarm sounding. there is only a requirement for 4 zones (2 door contacts and 2 PIRS), an external bell box and we need 2 keypad i have been looking at the Texecom alarm systems as we are familiar with these. can you advise which model would give me the above requirements.

Hi i should replace a smoke dectors for a DSC alarm. It's a FSA-410CS, what should i replace it with?

Hi, My existing system, which is about 15 years old, has become increasingly unreliable and I am now looking to replace the control panel, PIR's and external sounder. I am content with the current layout (four zones with door/window contacts and PAB's as well as PIR's) and the 6-wire cabling and other hardware is in good order. I would like the option of an auto-dialler to provide keyholder/mobile phone contact. I am considering the following items: Control Panel: ADE Optima Compact Gen4 with Enersys 12v 2.1 A/h Battery PIR: 3 x Scantronic 430 Passive Detector Pet Tolerant Sounder: Ventcroft Compact Classic Sounder c/w Cover A…

Hi, Will I have any compatibility problems if I buy the controlpanel (powermax+ or powermax pro) from sweden and all the sensors from UK? I would like to have the speech and text in swedish. Could I even mix my setup with sensors from sweden and UK? Does any of the powermax(+/pro/complete) controlpanels support swedish language? regards Olof

I need to fit 5 hard wired fire alarms in my house as part of a loft conversion. I bought a Scantronic 9751 based burglar alarm system from you a few years ago. Do you supply fire alarms that can be hard wired into this system?

I'm looking for a recessed sensor for an alarm, needs to be unobtrusive as possible,

Pyronix V2 GSM. I have 4 different voice messages on 4 different inputs. On activation of any input the first number is dialed, answered and accept code submitted.When the call is ended the dialer recalls three more times with the other three messages and the accept code has to be entered for all three.How do I stop the dialler making 4 calls for everyone alarm

Hello. I am going to buy som Visonic products from this site. Are securitywarehouse selling Visonic 868 Mhz. My current system is a Powermax+ 868Mhz and i want to buy some more Visonic products. Mr Leif Jonsson / Sweden

i have the optex ax 130t beam system, but unfortunetely the plastic cover is damaged on one of the units. Can I buy a plastic cover only for this unit from you guys??

Is Pyronix M12 (BlueLED) same connections as older M12?

Hi, Need confirmation that the set-up I have listed will all work together, we are ex.UK but now live in Crete where we have built a house without, regretably it now turns out, a hard wired alarm capability. Crete, once relatively crime free, has now gone bad ways and recently our neighbours were robbed and they had 6 dogs loose in the garden! So I am looking to buy and install a wireless system sourced from the UK and need clarification it will all work and is foolproof for even me to fit ! Basic I-ON16 with two PIR's, two remotes, two master blasters. Owing to our secluded position we need to make life miserable enough for the intruder to leave sooner rather t…

I have just received my scantronic 525r remote and would like to know to pair it with the control panel so I can use it.

I have recently ordered the SCANTRONIC 9448EUR-90. I believe this item has been sent to me missing the RKP. Looking at the description it should come with 1 RKP see description below] http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=172 My order number is 21987. Can you let me know please?