Intruder Alarms

Will this door contact work with my Scantronic 500r.+ wire free control panel, as the 536rEUR-00 looks to be obsolete?

hi , I have a warehouse building (vehicle workshop) with cars parked at teh entrance needed some advice as to which product you sell that can be used to notify me of human entry into the entrance area with cars parked in the entrance gateway , Also am thinking of installing CCTV , preferably high definition to observethe yard next door. Thank you in advance for yourhelp.

Hi how do you change the code on these alarms if you don't remember the present code?

I would be grateful if you could help me. My system has a Flashguard Exterior Sounder Unit 1164 with Xenon Flashing light and electronic sounder connected to a Franzen 3000, installed in 1987. I have bought an Optima Compact Gen4 Intruder Panel, and have got the strobe working but not the sounder. 'Old' connections were as follows:- Flashguard Franzen Connector Function connected to Connector A -ve Hold Off Charge - B -ve Switched Sounder Output S- C Tamper not connected D +ve Hold Off Charge + E not connected F -ve Tamper Return R- Could you please advise me how to connect the Flashguard to the Optima Compact Gen4? Thank you very much

I ordered a Visonic PowerLink2 (9-101070) hoping it would be compatible with my power master 30 but it doesn't seem to be. Can it be? If not which one is to connect my master 30 to the Lan?

What is the difference between Grade2 & Grade3 Sounders

I'm looking for the ProMax / Visonic Complete system, preferably in a kit, but I can't seem to find it at your site. Is this system something you are selling or do I need to look somewhere else? If you do, can you please point me where to find prices and so on. I'm also wondering about the price on the Visonic PowerMax Pro system. You seem to have very competative pricing on the other stuff your selling, so that's why I'm interested.

I currently have a FreeWave alarm for my detached garage and shed. Working fine but I want to use more wired sensors than the 4 that this allows. Could you advise on an alternative panel? I need 8 wired zones, no wireless, as its for a garage I must be able to arm/disarm remotley with a keyfob from the car and I need the monitoring terminals.

Pyronix PCX SMS 8 - 26 zone Grade 2 Communicating Alarm Control

I wanne order some alarm equipment, just wanne have your confirmation that the equipment i have choosed is compatible and works fine togehter. I also have a quesiton about the PIR detectors since we have cat, what model is included in the quickfit kit and what is recomended, i am thinking of ordering that kit and adding 2 extra of Visonic K985 Pet-tolerant Digital PIR Detector 15m 38kg. My shopping cart looks like this: 1ea.- Visonic Powermax+ Quickfit Kit (exc Wireless sounder) 2ea.- Visonic K985 Pet-tolerant Digital PIR Detector 15m 38kg 1ea.- Visonic Outdoor Siren MCS 730 1ea.- Visonic PowerCode

Hi Trying to programme a FAAC fob to a set of gates to a Bentley Bentayga. I understand that the code changes every time, would the below device work and would it be something that I can install? https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/intruder-alarm-ancillaries-c-36_46/pyronix-standalone-receiver-enforcer-series-twoway-radio-p-4552.html Many thanks.

I currently have a Visonic MCR-304 receiver used with a MCT-320 Magnetic Contact Transmitter on a door. The MCR-304 has developed a fault and I believe this item is no longer available. I was looking at the Pyronix UR2-WE as a possible replacement. I appreciate I will need to replace the magnetic contact transmitter; is there a compatible device and will the Pyronix UR2-WE be suitable. The MCR-304 is connected to a Texecom Premier Elite 24 and uses the 12 volt from the alarm. Many thanks

have purchased a Honeywell DT7450UK2 motion sensor for use in a conservatory and having received it am unsure of its compatability and wiring requirements. My security system is 12v however the wiring information states 24vdc for tamper and alarm. Please advise.

I am considering replacing my current alarm system, it has been installed for 20 years and it doesn't suit our needs anymore. I am looking for a recomendation for a system with the following requirements: Blank Control Panel 2 x Remote Keypads 5 x PIR sensors 2 X Door Contacts 1 x Smoke Detector 1 x external bell box I intend to replace batteries and cabling

The gsm unit has stopped working and the panel no longer recognises it. Could you please advise. Thanks

Hi, i currently have installed a risco wisdom in house an i am wondering if you could please tell me if my unit supports an auto dialler to call my mobile in the event of it going off?? if so do you sell these?? any help would be gratefully appreciated thanks.

been looking at your honeywell accenta gen4 mini packs which include a control panel and lcd keypad,

Can you please advise a suitable alarm system that is wireless but has a wired siren?

Hi I bought a Visonic PowerMax + in April Now the voice module is not working properly It seems to have lost a part of the century, so you can not hear what it says Have tried resetting the device it does not work either Now I do not know what to do hi my English is not the best so I will try as best explanation I can when you activate the alarm says larming away please exit now but you only hear the beginning of a word and nothing more so all the alarm would say is not there

Can securitywarehouse tell me what the cheapest bellbox they can find is? I was thinking of the honeywell ag6 or the esp acouta, I can only find an esp acousta for a tenner but it has a red lens and not blue. Could securitywarehouse price one up??

Could you advise me if Excel and R8 Panels are basically the same and if not the difference between them and are they programmed the same way?

Hi all - first post here. Does anyone know if the Scantronic CS 430 pet immune PIR is the same as the Visonic K9-85? Wanted to buy the Visonic K9-85 on Security Warehouse but can't see it in the listings but the Scantronic is. Looks the same. As does the K9-80 with the Scantronic CS 440. I seem to remember that Scantronic and Menvier merged into one effectively but something tells me that Visonic are also with these guys too? Never ever had a problem with the K9-85's. Thanks.

Hi, i recently ordered some extra window/door sensor and an external siren for my Visonic Power Master 10 ADT Branded alarm. I have added a few sensors in the past with no problems but both door switches and the siren will not communicate with my alarm panel. When I add the device and press the auto-acquire button on the new sensor the panel tells me it is not a compatible device. So i tried entering the 7 digit number and now the panel said it is not registered on the network. Thinking it may be my panel at fault i tried to register them on a neighbours panel with the same results please advise?

Hi i have a Galaxy 2-20 control panel, i don't know the engineering code , can any one help me how to factory reset the panel? thanks

Hi Does the Texecom Premier 24 include a remote keypad or is that an extra bit I need to buy?