Intruder Alarms

Hi there, If I use the Texecom Premier Impaq Plus With Built in Contact, with a Honeywell G4 alarm panel, can I use 6 core cable, or do I need to use an 8 cables to set the contacts up on zone 1, and the shock sensor up on another zone.

Can you suggest some compatible, either a wired or wireless Panic Attack alarm for the purchased Secware Optima

Hi, have wired up system as should be, have all cct returns, bell tamper, PA and global tamper returns as should be. But on powering up all the RKP is showing is software version 4.00. Have depowered and shorted out NVM & kick start pins and tried again but just stays the same.

I purchased from you the Secware Texecom kit. I want to connect shock detector and open detector to a double opening UPVC patio door. I also want to connect a window detector to a UPVC window. Can you please recommend the appropriate products from your store. Basic to mid range equipment will be fine.

Hi i brought galaxy g2 alarm panel from your store.i am going to add second mk7 keypad to the system.according to installation menual i need to use eol 680 ohm resistor at each keypad and connect them in daisy chain. Please can you tell me what watt resistors require. thanks

Hi there, I have a Securit 900c alarm panel and require a replacement keypad do you sell a keypad for this model, if so can you provide me with a cost and part number so that i can order one from you. many thanks....Tom

Require a ADE G3 Accenta Remote Control Pad that works in conjunction with a Jenko board. Would the current offering which you offer [ADE G3 - 4] that works with a Optima Board work with the Jenco board?

Hi can you help, I have a client with a alarm system, th only information we can find is its a , RS 125, I seem to remember that jSB made some of these alarms, its about 16 years old, we need a new RKP for it, 7702-1762 VERSION 1-5 if you follow this link it brings up the manual /mcalarms.co.uk/manuals/eb2160715c71a5288868dea766782281_RS125UserManual.pdf can you tell ne if its availble and cost

Hi I am looking at the texecom ricochet elite 32 xp-w unit and wanted to know what the software version of the unit was?

Please can you advise what speech diallers are compatible with the honeywell galaxy 2 alarms. I'm looking for one that will alert for intruder and a separate alert for fire. Thank you

Just bought an apartment with the above alarm fitted. At present no one seems to able to give us the access codes rendering the unit useless to us. Is there anyone who can reset it for us and/or give some helpful advice on its use. Thanks, best regards

Hi just a quick question does the above control panel come with the ability to call or text you if your alarm has been activated or do you have to buy extra parts? As screwfix are advertising it comes with Voice alerts up to 3 telephone numbers when alarm is activated.

Does this unit have a double pole switch over or if not what is the price of the same unit with double pole switch over.

I've a customer with a veritas R8 plus alarm system, which is not working. The keypad / control has the set & tamper lights lit, but none of the indicator lights. They've had a couple of people look at it, & although one company changed the battery which corrected the problem for about 6 weeks. It is now the same the control panel battery is showing 12.7v on the meter . The keypad does not appear to be functioning correctly as when some buttons are pressed they operate 2 buttons at once. I'm thionking of changing the panel, but also wondered if it could be a problem with the battery in the outside alarm box. I wondered if you have come across this problem before, …

i intend fitting a texacom premier and the client is wanting us to use the flush type keypads . can you advise as to the back boxes we need for these as we need them for the first fix stage . at the moment that will be two into brick and one optionally into plasterboard . can we order these upfront or do they only come with the keypads when ordered ?

Texicom Premier Elite 24 panel, siren and medusa PIRs, Order Number: ***** 31st March and recently completed the installation hard wiring 5 PIR’s into each of 5 of the 8 zones available within the panel. I have set all 5 zones ‘double pole / EOL’ but the panel is showing tamper fault error message. Following further investigations it appears the medusa PIR require 2 resistors to be installed across the tamper 2k2 ohm and zone 4k7 ohm. My first question is – is this correct and secondly do you stock these items.

I'm setting up sensitive material outside my organization in a UK military environment in Portsmouth and we need a small alarm system with the following features : - small factor - covering a 20sqm room - ability to set it up ourselves. - volumetric detection - door opening detection - no wifi - alarm reporting via Internet app, over wired Ethernet - optional : alarm reporting through 4G/5G internet that can be deactivated or disabled. - optional : notice upon power loss or notice upon switching to UPS. - ability to deliver the system rapidly within a few days. I was thinking about something along the Honeywell Galaxy Flex range but other options would be acceptable…

Hi, I'm looking to purchase three of these detectors: Bosch Blue Line ISM-BLD1-P Pet Friendly TriTech Detector I see from your site and the spec sheet that they are manufactured in three different frequencies. If I order three, are you able to supply three different frequencies? Three different frequencies would be ideal as the location of each detector may mean that their coverage may overlap. I'm looking to place my order for these and seven other PIRs ASAP as I'm due to start installation on Friday. Many thanks in advance, Neil.

Hi. I am interested in a Powermax alarm system, but need some information and advice. First, I live in Sweden, shipping available? And if so, could you please state the total price delivered to me? Our needs are for a two-storage residential home at a total of 145 square meters There are two main entraces and two patio doors in glass. The two patio doors are in immediate proximity to large window portions with windows from one side of the room to the other at a total of two times 5 meters and reaching from floor to roof. There are also a bathroom window and two windows at the entrance from floor to roof. We want to have the possibility to arm the alarm for

I am looking for a wireless alarm with 4 sensors, 2 door contacts, 2 keyfobs and an autodialer, can you let me know the cheapest one you do please.

have just installed my new control panel everthing working fine, just won't let me change the four digit code, have gone through the instructions given in user manual but it still only lets me use the factory set code to set the alarm,could you please give me some advice to correct this problem.

My system requires at least 10 wired inputs and up to 8 wireless. What would you recommend in this case. I also want a system which can phone/message me if there is an alarm and can be remotely operated.

I have bought 2 grade 3 roller shutter contacts from yourself. I am going to be installing them shortly and have removed them from their packaging to check them out. The wires from the contact are colour coded but as it is a galaxy panel I am connecting too I need 1k resistance. On the contact instructions it relates thus to the colour green, but the wires on the contact don't have this colour. What can I do to resolve this ? Use 1k resistors ?

hi im looking to buy the ADE Accenta Mini Gen4 Starter Kit with LED Keypad, 2x Quest PIRs and also the Klaxon 127Db 240v High Output Master Blaster Siren (12v Relay) and was just wondering if the klaxon will work of this alarm panel. thanks in advance.

Hi. I have the CP7 which doesn’t have the LCD display. Can I replace this with the newer CP8 keypad whilst retaining the old CP7 main unit? Thanks in advance