Intruder Alarms

My company has a Scantronic 9752 Product 152/196 alarm system and we need to get some additional alarm fobs. Are the Cooper Prox tags (Product 11/113) the correct ones?

In your opinion,which pet PIR tends to work the best and is more reliable for a wired system.I have looked at Bosch,Honeywell,Visonic and Texecon but info is not conclusive.Thanks

Hi! I have previously purchased Visonic PowerMaster 10 Panel with Visonic PowerG KP-160 White Touch Screen Arming Station c/wProx. I wonder which Wireless Keyfob Transmitter would work with the current setup so that I could control the alarm from a distance?

which pir is suitable for scantronic 9449 burglaralarm

hi i was have a look for a couple of pir for my alarm system as the one i have are about 12 years old and lok like they need replaced could you please tell me if this ones ESP Quest 14m PIR will fit my alarm system it is a GARDINER TECHNOLOGY GARDTEC 350

Folks, I am looking for a replacement keypad for a Gardtec 800 alarm system which is a 6 wire Gtag type. Can you help out please? regards, Brian

I am about to place an order for a Scantronic 9651EN-41 (9651 c/w 9941 rkp)with a remote keypad and tags etc. You do not seem to have a Scantronic external sounder. Are all the sounders you have of othr makes compatible with this control panel?

Also I have a question about the Genesis 7ah 12v battery http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1340 Will this battery fit inside the Scantronic 9751 control panel? http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=36_102_41&products_id=549 Your reply will be appreciated, as I wsh to order items as soon as possible. Thanks

Can you confirm the version no of the Wintex software

Hello there, Could you, please, help me finding which of your system would be most suitable for my needs? I am looking for alarm system for the house and 2 wooden bike sheds 7 meters from the house. The system for house can be wired, the system for sheds must be wireless. The house system will need 5 PIRs, one of them should tolerate a tortoise (25cm, 2 kg, in a heated enclosure in the hall), 2 door contacts, 2 sensors for windows (breaking glass or vibration?). There are both, a land line and GSM cover, in the house. The system for the sheds should probably have 1 door contact and 1 PIR for each shed, PIRs could maybe replaced by vibration sensors attached directly t…

Please can you advise which of the surface contacts you sell would be suitable for use in conjunction with the wired input of the 'Visonic MC-302e PG2' wireless magnetic contact.

I can't find any Wired Siren for my Powermax Complete alarm. Do you have one, or could you recommend one?

Hi. Do you have wireless window vibration sensors in brown that work with Galaxy wireless alarm system?

Hi I want to use the Visonic Discovery Quad wiireless detector to protect a garden shed approx 25 meters away from the panel. do you happen to know if this particular wireless item is relaible or would you advise using hardwired ?

Hi... can you help me locate the correct type of wireless door contact switch for my home alarm system please? The system has a cooper security scantronic 9930 control. I have a wireless contact on top of a garage door which has failed.. I have changed the battery to no effect. I could send you pictures if it helps locate the correct type. Would you also be able to help with instructions for replacing the unit. I do have access to the installer mode code Many thanks

FIrstly: Iam from Finland do you also ship overhere? Iam looking for wireless door switch system like Visonic. I believe this is good quality system? I have separate home automation system where i would like to integrate this. Can i do it with Receiver MCR-308 8-Output Wireless PowerCode Receiver? I mean if i have 4 door switches and and carbon oxcide detector and maybe some other then i can contact with 8 different sensors to my system? Does this unit include already relay to make conatact for 24VDC system? Can you provide such relay if its not included? How much its cost? Iam also looking for RFID system with single relay output 24VDC and some 8 tags. This would nee…

My wireless home alarm system has been jammed by source unknown. I have reset it but would like to back it up with hard wired system, not susceptible to jamming, for the upper floor of my house. Could you suggest components for such a system. I would like it to include Two PIRs (no need for pet friendly type) A remote wired keypad which can be set/unset easily without keying in a four number code ( I would like to either press one button or use a proximity tag, unless its operation can be jammed) A panic button (unless its operation can be jammed) Outside bellbox with battery back-up (not Odyssey) Thanks

Dear Sir, I am looking for a wireless intrution alarm for a family house. I would like to have features such as, remote control frorm android or ios, GSM, camera display remotely. I live in Sweden and the alarm needs to support the EU standards so that it can be connected to a local security service if the alarm goes off. Would you recommend an Kit?

I am considering buying some honeywell equipment to upgrade my alarm to wireless. Firstly I just wanted to check that all the components are fully compatible with the Galaxy G2 panel (I have the G2-20, or actually the G2-12 as it is not expanded), and that it will support this many sensors. Do you know this for sure, or should I contact Honeywell directly Honeywell Wireless Door/window compact magnetic contact Honeywell Wireless Dualtec 15m x 18m Honeywell Wireless Smoke sensor with built-in sounder DF8M Honeywell Carbon Monoxide Wireless Detector Honeywell Galaxy 2 Series Wireless Receiver (RF Portal) Microtech Galaxy MK8 Keyprox LCD Keypad Honeywel…

Hi, I wonder if you can help. I have an alarm system Networker ((Menvier) TS690R and need some additional wireless pir sensors. From what I can see they don't make the alarm system any more, but looking at your site it appears the Scantronic pir's maybe compatible?

I am sorry to bother you again. Can you tell me please is it possible to get a wireless sender and receiver to fit inside the VERITAS R8 control panel as we have a garage that was alarmed that way as it is detached from the house and the old wireless sender is not compatible with your system. Also is there a code to open the panel to replace the battery as the installer took all the installation notes with him and he has gone to Australia for 3 months so i cannot contact him.

i have respond/eclipse wireless system fitted in the house occasionally i have my van in the driveway would this "Risco Wisdom Wireless Shock Detector" be suitable to fit in the van? or can you recomend one that woud work with my alarm

I have purchased a belle and two twin alerts by pynonix (order no 33462) to install on a scantronic 9752 panel. Neither the scantronic nor either belle/twinalert manuals match each other so would like some guidance on wiring these up. The scantronic manual has the following output:NO1, NO2, Tr, 12V AUX and 0V, and a separate +, and LS for internal loudspeaker. The belle has B-, B+, BA, STB, SPARE, BT and TF, The twin alert has 12V+, 12V-, SPK and BA The belle shows the following connections for scantronic: B+ = 12V B- = 0v BA = BELL STB = STROBE- BT = TR TF = 0V The TwinAlert has: 12V+ = +12V 12V- = 0V SPK = SPKR (low) BA = BELL The s…

We recently purchased a system which includes 2 x Pyronix Deltabell and a honeywell ADE GEN4 metal system. When reading the Pyronix data sheet it states that the bell trigger to the Deltabell must not be in paralled ( ie from one output ) two outputs must be used. The problem is I dont think the GEN 4 panel has a second bell output terminal, or have i missed it? As the deltabell is class 3 we have to install a resistor (4k7) from the +ve to the bell trigger ( to give it aprox 2v or above during normal mode ). With one deltabell this works fine. How should I connect the other deltabell? would a solution be to install a 2K resistor in place of the 4K7 and set both bells t…

Hi I am adding a Honeywell 12v latching base to an Accenta Mini Gen4. How do I wire the N/O N/C and C terminals on the base for a Honeywell Combination Optical/ Thermal Smoke Detector?