Intruder Alarms

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/vibration-detectors-c-36_56/aritech-gs610-shock-sensor-p-2831.html I have a wired home alarm system. Looking for replacements sensors that detect any force used to gain entry at windows (maybe referred to as shock sensors) Would this product be suitable?

ESP Optical Smoke Detector 12V With Relay Base PSD-212 https://www.securitywarehouse.co.uk/catalog/fire-c-38/firesmoke-detectors-c-38_39/esp-optical-smoke-detector-12v-with-relay-base-psd212-p-5303.html Will this fit an accenta g4 alarm panel. Four connections positive negative two more wires for trigger to zone 8.

I have a client that requires a system with proximity fobs rather than a remote control keyfob. I have been checking existing cabling and conduits in the house and believe that I will be able to hardwire the remote keypads, although I would still like to maintain wireless PIR

I am looking for a simple intruder alarm system for a large house. Not really interested in remote access and monitoring or systems requiring computers to load up and configure. Need 4 x RKP and 19 x PIRs. No PAs or door contacts, though will want to use PA functions on all the RKPs. I really like the simplicity of setting up and using the Accenta control panel, but am I right in thinking that 8 zones are the maximum available for PIRs? I could easily group together 2 or 3 PIRs on some of the zones but that can make fault finding more tedious. Would appreciate you confirming number of zones available to PIRs on Accenta Gen4, also any suggestions for another product.

I have a cooper security 9651 panel. I'm rewiring the panel from global tamper to FSL because i've been told its more secure. I've wired single PIR zones with no trouble but when there is more than one PIR or surface contact or Panic button it shows tamper in walk test. If I one device is open at once in a zone, its fine but if I open two or more devices in one zone, the panel detects tamper. (E.g. When I open one door in Zone 7, the panel doesn't say tamper but when I open a door and a window in Zone 7 the panel will detect tamper) Can someone help me with this problem? Thanks Krishan

got around to installing the pyronix twin alert and the bell output is nice and loud but the spk just clicks? I have it set on a entry/exit output on a galaxy G3 panel and have moved the volume control. To debug I moved the wire I have going to the bell side to the spk and it don't sound? I even tried using the pull up resistor, still didn't work... I know I was somewhat brain frazeled by the time I got to do that (I even wired a sensor to the wrong zone lol) and wondering if I have missed something.. +12v -0v Spk switched to 0v Bell switched to 0v

Optex 20m External Twin Beam https://www.securitywarehouse.co.uk/catalog/cctv-equipment-c-1/detection-c-1_24/optex-20m-external-twin-beam-p-84.html Hi there, I am looking to have this type of system used in my house. To cover all usual access’s. Could you advise what infrared systems would be best and what control panel to streamline them with?

Hi, do you have any ACE transmitter keyfobs for the Gardtec 593? I would need 2. Many thanks in advance.

I have two garage doors, roller shutter style on my house in need of connection to the Visonic powermax complete system installed. Is it possible to use the "MCT-100" connected to a couple of "Knight Plastics F10C Roller Shutter" or do you have some other recommended solution for garage door protection?

do you know how many Texecom Impaq SCcan be connected to one zone on an alarm panel

Hi, How do I connect my I on 40 security system to the internet?

i ordered a Texecom alarm R8+ in 2010. I setup the alarm last year. i got some PIR petwise frmo texecom. Well, i have false alarm during the night 1x / each month in the room where there is a sofa. I have 4 cats. I guess, they jump from the sofa. Do you know a trick to decrease the sensitivity ? or there is another solution / PIR to avoid those alarms to buy ?

I am after a bit of help. I am looking for a wireless alarm recommendation. I normally fit a mixture of texecom and Honeywell hard wired system, but looking for a wireless system. Just a few requirements : Decent looking keypad. Bell box with illuminated back light Ability to send activation via internet. Thanks Ryan

I have a few G3 Keypads as they are now Obolete can you upgrade with a latter model or do you have to change the pannel also?

I am trying to get hold of a morley key fob for working electric gates and access doors in our apartment block. The reader is a Morley TM4 Series. Please can you let me know if you have these in stock or alternatively another key fob that is compatable with the reader. We need 6 key fobs. Thank you

Hi I am looking into buying a Visonic home alarm system Is it possible to mount a curtain detector across a room, i.e. creating a wall (a foot inside of a number of windows), even though there might be chairs etc on the floor?

HiI have been asked to install/add 2 Texecom AEB-0001 Impaq Plus Shock Sensor to a Scantronic 9448 alarm panel. (18 months old)There are 4 spare zones so that is not a problem, my question is will the 9448 panel support these type of Shock Sensors or could anyone recommend a more suited Shock Sensor?I will be glad to hear if any one thinks the panel is not suitableThankyouRichard

Hi I need to purchase a wireless alarm system with proximity entry I have looked at the powermaster visonic range but need to know if the powermaster 10 panel has an internal 12 v supply outlet so I can add my already owned gsm dialer.I have seen that there are two proximity readers in the powermaster range the kp 160 and the kp 141 which is the most suitable and easiset to use and are the proximity tags an extra with these items

I have a system that is activating as soon as the full system set is applied and timed to set. It sets ok in part, however there are no open zones to activated the system. Tamper circuit is also fine. Any help is appericated.

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/remote-signalling-c-36_57/eaton-scantronic-adapter-board-p-6480.html ------------------------------------------------------ I have an older i-ON40 Scantronics alarm (Cooper Security Limited) which I would like to reconfigure to enable remote access. However I haven't found any online information that can confirm if this older model is compatible with the remote App. It is currently running firmware version 4.04.17. Is the current firmware compatible with any remote Apps that are available? If not is it possible to upgrade the firmware? Which WIFI module would be required? COM-DATA-WIFI or COM-DATA-4…

I have a few PowerMax questions that I hope you can help me with: - Which frequency band is PowerMax+ and PowerMaxPro operating at? - How much is it for the PowerMaxPro unit (incl. GSM and Powerlink) together with 2 x keyfobs, 2 x smoke detectors and 2 x motion detectors? - Is it possible to connect a Powerlink and GSM module to to the PowerMax+?

I would like to exspand the system I have,which is PA 4 WIRED alarm (Friedland)to ad to the system with two OPTEX SAVER NEW QUAD PIR. Would this be suitable.The movement detectors I have,have got 6 connections in it.

On the display screen two lines of Pixels have failed making it difficult to read what is on the lower part of the screen, I have re-booted the unit but there is no change. Do you have any further suggestions for rectifying the fault?

I have a Scantronic 9210 Intruder system with a flush fitting keypad in the lounge. I know this panel is obsolete but does anyone know of a panel that offers a flush fitting panel as an option if it dies. The wife's not to keen on a 6" x 9" hole left in the lounge wall $ I.m not keen to redecorate the lounge!!

hi i am after a texecom 24 1xd expansion module, do you sell these as you only show the 60 version