Intruder Alarms

Hi. I have the CP7 which doesn’t have the LCD display. Can I replace this with the newer CP8 keypad whilst retaining the old CP7 main unit? Thanks in advance

I have just purchased today from you this item could you let me know if it has an operating Frequency: 433MHz at 200KHz bandwidth

It keeps sounding at random times, with no tamper fault and no error message on the control panel. The problem seems to lie with the sounder only.

Hi, looking to but the Texecom Kit 2 32 Zone Wireless Kit with Sounder but have some questions. How is the Premier LCDP powered... batteries of PSU? I assume the LCDP is wireless to the main control box? I have a couple of locations I would like to 'hard wire' will any 'standard' PIR be suitable for this? Is it only 4 hard wired channels I can use? Think I need a cover for the bell box with this kit? please point in right direction for this please

On which frequency does the Visonic PowerMax+ system that SecurityWarehouse sell use? /DG

I used the Honeywell Activ8 PIR in an installation in a house where they have a cat. I have set the tolerance to 15kg and pulse to medium (jumper link between 2 and 3) There have been a few false alarms in different rooms and none of the sensors face a window or stairs, there are chairs and sofas though. I have changed the sensors to the highest tolerance yesterday - 25kg and fitted the jumper link between 3 and 4. Which I wouldn't think is necessary for a cat. Is there anything i may have missed that caused that problem? I don't know yet whether the change I made is good yet as i've only done it yesterday. Is it maybe because it's a relatively cheap pet se…

is it true that Visonic plans to stop production of the tower 20am?

I am replacing a Karisma plus alarm system in a large house. Unfortunately this randomly goes off & is especially susceptible to fluorescent lights. Requirements for new system:- Be able to identify all items individually and have them displayed with name on RKP eg kitchen window, front door. House has several loops of 4 core (unscreened) cable so can't put items on individual wiring. No windows = 17 no doors = 3 no PIRs = 6 no fire detectors = 2 no RKPs = 3 System should have dialer + speech module or GSM Hopefully system can be set to detect two events before alarming.

According to installation instructions for AG6 sounder PCB should be marked as follows TR- V- ST- V+ S- The actual PCB is marked ST- R- SW- V+ V- Can you confirm R- is actually TR- and SW- is actually S-

Hello, I have some question about the alarm system. We have two cats. Now I'm looking for the right alarm system for our house. I have 26 wired motion sensors and still need 4 wireless door and 7 wireless motion sensors. Which alarm is the better and the more modern, the Honeywell Galaxy Dimension GD-48 or the Galaxy Flex 50. Second question, I have the wired motion sensor “Active8 PIR with Pet Immunity”,( I bought them last year in England), are they compatible with Galaxy Dimension or Galaxy Flex. Or do I need other new wired motion sensors. The last question, what is the meaning of "Links" in the alarm system. Because the Honeywell Galaxy Dimension GD-48 have 64-Link…

Hi, We are a school with a primary, secondary & sixth form buildings, each with their own intruder alarm panel and we are looking for a fob which can be programmed to all 3 panels. I believe our panels are Honeywell Galaxy. Do you sell an alarm fob which can be programmed to multiple panels? I look forward to hearing from you.

Hi all... i'm trying to locate some gartec 350 plus RKPs to connect to teh main control panel, does anyone know where i might have any luck getting any - i'm aware that they have now stopped doing them, was just wondering if there are any surplus left - also does anyone have any gardtec 350 CPs for sale? any help/advice would be appreciated. thanks in advance bob

Hi. After installing a new accenta mini today i was ready to power up. connected mains but on connecting battery connections i saw the battery fuse blow. I checked all wiring, found to be correct and changed the fuse, connected battery and again the fuse blew immediately. I then disconnected all wiring from the system, i.e. bells and detectors, so it was 'as arrived new' and again, replaced battery fuse, powered mains and connected battery and the same thing happened again. I left battery & fuse out and powered up from mains. Alarm seemed to be working ok but i then noticed smoke coming from a resistor above and slightly right to the battery fuse, so i…

Just purchased a host of intruder alarm equipment from you - it arrived yesterday. The control panel is the Texecom Premier 48. Does this panel have an intergrated sounder that will sound when the alarm is activated (entry/exit and on activation) or do I have to buy something additional?

I am sorry to bother you again. Can you tell me please is it possible to get a wireless sender and receiver to fit inside the VERITAS R8 control panel as we have a garage that was alarmed that way as it is detached from the house and the old wireless sender is not compatible with your system. Also is there a code to open the panel to replace the battery as the installer took all the installation notes with him and he has gone to Australia for 3 months so i cannot contact him.

Hi, I wonder if it`s possible to use the kp-160 as a remote keypad for arming/un arming and NOT only for proximity tags (chicklets) to a Powermaster 10? What version is the Powermaster 10? Is it v 15? Because I heard that this is the key to get this working as a numerous keypad. Best Regards Ulf

My wireless home alarm system has been jammed by source unknown. I have reset it but would like to back it up with hard wired system, not susceptible to jamming, for the upper floor of my house. Could you suggest components for such a system. I would like it to include Two PIRs (no need for pet friendly type) A remote wired keypad which can be set/unset easily without keying in a four number code ( I would like to either press one button or use a proximity tag, unless its operation can be jammed) A panic button (unless its operation can be jammed) Outside bellbox with battery back-up (not Odyssey) Thanks

Hi i have installed all the system , when i test the system for dialling a tel. no. it works , but when i make a test alarm activation , the speech dialler does not dial any numbers saved in it . please advise? Mahdi

Does this come with a battery ?? If not, which one do I need to order for it. Which Remote keypad do I need to order for it.

I have bourght quite a few of these & on wiring & checking them find none sound when tested. All you get is a constant lit LED. Is there a possiblity that all are faulty or has someone designed the ultimate pointless product? If one went into alarm I'd expect all linked alarms to sound. Is this not the case with all linked 12v linked detectors?

My current alarm Guardall Rascal Super is broken so needs replacing(we are using 4 programmed zones and chime). I'd like to replace the control unit unit and bellbox but use existing wiring, sensors and internal speaker. I'm looking at the MDT Avanti 8 and AG6 bellbox (current bellbox looks tatty and has no strobe). 1. Is the chime quite loud? We would like to hear if someone enters the house from the other side of the building. 2. The Rascall Super system is 12v and I think the Avanti 8 is 13.8v, will our existing sensors work with the new control unit?

Can I connect a telephone dialler to the Optima 8EP396A . The instruction manual says the communicator is not fitted to the Optima Compact.

Hi, I am installing a Honeywell G2-20 alarm system at my home. I currently have two iWise 800QG3 movement sensors and am looking at installing an additional four to the system. I am considering purchasing the following detectors. https://www.securitywarehouse.co.uk/catalog/bosch-blue-line-gen-2-bld2-pet-tritech-blueline-detector-p-2392.html I understand TriTech is the best class of motion sensor to reduce false alarms. Is this sensor recommended or would you recommend something else? Any advice is much appreciated. Kind regards,

hi I was just wondering what control panel I would need to buy with the Klaxon 127Db 240v High Output Master Blaster Siren (12v Relay)I will also need 2 P.I.R's. thanks in advance.

Does anyone know anything about this alarm system? It just keeps setting itself off without us setting the alarm. Its keeping us up at night and im getting desperate. Someone please help with any knowledge at all. Oh and it doesnt let us reset the system at all!