Intruder Alarms

Tate T-B600 external sounder does not seem to be available anymore. Please advise on suitable replacement external sounder box for wired system to Tate "Javelin" 8 zone panel

Hi Folks, Looking to replace a failing alarm system we currently have in place at a county scout hut. It consists of three PIR's, auto dialar and the central panel/main box. The alarm is activated by locking he door and de-activated my unlocking the door! (Clever stuff ) For ease of use we'd like to keep this system. For numerous reasons we wont be using a control panel to type in the code! Any suggestions? Just looking for a replacement system.. Something that we can use the existing lock with! (The door lock is simply wired straight to the alarm) Regards, Scott

Hello I have a veritas control panel and key pad with a wired intruder alarm system. The power circuit tripped and now I have the \"unlock\" light flashing. Until this is sorted I cannot set my alarm. Can you help please. Regards Roger Bell

Hi I wonder if someone could help me please.I have a Veritas R8 with 5 zones 2 keypads,2 panic Buttons.We went away for the weekend came home electric Had triped alarm had gone over to battery and flattened both alarm panel and bell box, I turned electric back on alarm powered up and recharged but both key pads won't do anything every button you press has the same tone it seems to have locked out.The battery seems ok because if I disconnect from mains it lasts ages.Is it time for a new panel? Thanks Guys Gary

I installed an I-on40 and two keypads, KP-01. I had a problem earlier in the year whereby the keypads beep indicating 'Duplicate Entry.' I tried replacing the keypads with a spare, but this did not resolve the issue. I had thought that it might be caused by line termination, so I changed that. It worked for several months, with one terminated and the other unterminated, but the 'Duplicate Entry'; has returned. KP1 is located about 1 meter away from the I-on40; KP2 is located about 10 meters away. KP1 is set to address 4; KP2 to address 2. The error occurs whether I try setting or unsetting the I-on40 either manually, by typing in the code, or by using a fob.

would the Siemens IMKW6-10 wireless contact work on a Europlex signet 200 alarm panel.?

I’m after 2 No. keypads compatible with the 4 wire Gardtec 600 or can you recommend a compatible alternative.

I have optima MX6 old model of burger alarm system which is faulty and looking for update alarm control panel only. I would like to keep original IR sensor, alarm bell, contact switch and panick buttom if possible. Please could you kindly recommended the model number for my replacement and actual cost. Jimmy

Does the Scantronic 9651 EN-43 have a proximity remote keypad, if so does it come with any proximity tags included? Thanks

I have a Eurosec CP8L LCD. This has been very reliable. However I have had a new front door fitted which meant using a new surface mounted reed sensor for my entry/Exit contact wired in series with my back door sensor. I want to check my zone settings. I want to reset my entry time to 30secs, unfortunately I am unable to programme the zones, the display just keeps going back to "do you want to Program Chime" and will not allow me to proceed further to Program Zones. Have you any idea how I can get to the program zones. I have done a factory reset, ie:- disconnected the power, etc but to no avail. Have I pressed something I shouldn't have? I have had …

i would like to ask if the auxilliary input of the MC-302E PG2 can be programmed as a different zone.I want to use 2 different zones from the MC-320E PG2. Can this be done ?

Please could you advice on the best Honeywell Home Wireless Alarm System which will allow notifications of activations to be sent to mobile phones and allow interaction by mobile phone I was looking at a price range around &300 to £500 is there any systems in or around my budget?

Good Afternoon We have a Scantronic 944ES intruder alarm system, but no manual. I would be very grateful if you could advise me if you are able to supply a manual for this particular model of alarm alternatively where we could get one from. Thank you in anticipation of your assistance Regards Lucy

I Think that I require, Control panel (can be hidden under stairs) 1-off Nice looking Lcd keypad (for front door) 1-off keypad (for rear door) 3-off wired Quad PIR for inside 2-off wired Dual tech PIR for outhouse (extreme cold/heat). 3-off internal Door contacts. 1-off garage Door contacts. Panic Button Txt or voice dialler Listen in function Dial in to arm/disarm would be nice or over web via phone? It would be good if the alarm had wired and wireless zones in case I need to upgrade after the floors went down I really like the Honeywell Galaxy Dimension GD-48C with Touchsceen Keypad Kit, but is it over kill? What would you get? Thanks in advance…

My installation went fine and system has been working fine for 2 months now. Yesterday we had a power cut and the alarm went off immediately. On investigation I found that the battery fuse was blown and that the charging circuit was generating no voltage at all. This means voltage from the supply side of the fuse holder is not present. The low voltage AC supply from the transformer is ok. If I put in a new fuse ( all I have at home is 1A ) and then connect up the battery the fuse blows immediately. The open circuit voltage on the battery is around 12.5 volts and I imagine that is the charge it had when I bought it. The battery is not a short circuit . If I ignore the …

I would like to order 10x Optex VX402REC outdoor sensors. Please could you help put together a basic alarm systems as follows: 10x Optex VX402REC sensors Outdoor Sounder Indoor Sounder Key pad to disarm Please could you price for a reliable system and also could you provide a wired option as well as a wireless option?

I have EATON SECURITY building alarm system …with Eaton Speech Dialer model TSD2-UK …however the telephone lines are now been replaced by digital phone via internet hub…so this will no longer operate. Could you please advise new EATON Speech Dialer using SIM card or other as a replacement…may need external aerial to increase range/ signal. Do you supply necessary SIM card ? If not who would your company recommend. Many thanks your support and advice is very welcome.

could someone please recommend a backup ower supply suitable for the Risco Gardtec Eurosec CP8L

I was under the impression that with the powerlink3 I could access my internal cameras without a connection to a security service providers or rather the IPMP server provided by the service provider? Is this correct?

My question is why does the battery fuse blow every time I connect the battery? The battery is being connected the right way round. I disconnect the battery, change the fuse and reconnect the battery - the fuse blows. I've been doing this with the mains power on, so not to activate the siren. Is the battery or control panel faulty, or do I need to completely power down before changing the fuse (I can't see how this would change anything)?

Hi Security Warehouse, I have been trying to re-commission my SD1+ after it being disconnected for several months. However, I cannot enter any 'user code' because buttons 1,2 and 3, (also A), do not respond when pressed. I would appreciate your help please. Regards, Chris Wills.

Having had a Texecom R8 installed since 1996 the only thing that has now failed is the "5" on the Keypad, so I have replaced the old one with new 2010 version. The swap out has worked fine, but the Red Zone 1 & 3 lamps are on all the time, I have check the wiring and all is OK, and I have done the the scan for Keypads "0 9" from the new keypad, all appears to be OK, but the the Red Zone 1 & 3 lamps remain on (on the keypad) Date stamp on the Main box is also 1996, so is this a backwards compatabity issue with the new keypad and the old main box?

I bought one Optima Compact Gen4 control panel in the past, and now I want to buy one more. Is there a way to arm/disarm the unit wirelessly? Is this what key fobs are for? If so, which is compatible?

I read that Axis 1031w surveillance camera was supported by the powermax alarm. How many cameras are supported? If I connect a camera to the powermaster alarm, can I also connect it to my synology NAS?

Hi I have just installed a new Accenta G4 Compact with LCD keypad. I am quite confident that all is wired correctly. I note the Engineer's manual tells you to connect all the zones, tamper, pa circuits and then speakers. First question - the manual tells you to make sure that the factory fitted links are connected to the PA, TAMP and T-A. Surely this would mean that these functions would not work if these links were left in as they would be permanently shorted? I have checked all these circuits and they are closed (short) and therefore I assume I may disregard this. Second question - On page 14 the manual instructs you to connect the mains and it says t…