Intruder Alarms

Hi, One stupid question for the day, i have a LGSIX/01 and need to know how to connect it to a Intellisence AG6 sounder, as the connection dont marry up and i dont want to get it wrong, all help is appriciated Regards Brian Panel has Strobe + Strobe - SCB (T) SCB (A) Bell + Bell - Sounder has ST- (strobe trigget) TR- (tamper Return) S- (sounder trigger) V+ (PositiveSupply) V- (negative Supply)

I think before - the best way to protect a window was to have a foil running around the glass.. Now I see a lot of electronic gadgets. However I am not sure how reliable they are. Say vibration sensor. I guess it is easy to cut glass above/below such a sensor with diamond cutter and simply disconnect it with a knife or undo latches and open window slowly or get through not disturbing the sensor using the hole... I mean - if the intruder is an idiot and will smash the window with a brick it works but otherwise - unlikely... am I right? is there other means to protect glass area? If the window is obscure and design and beauty considerations arent important - is …

I am interested in a small home alarm with following function: Hybrid base unit with backup battery and communicator that can send alarm to my cellphone trough GSM mobile phone network, working in Sweden. Remote keypad Tag to set or disarm the alarm I have looked at Honeywell flex and ionEX and Microtech Galaxy 2-44 Comms C/W Keypad but I do not understand if GSM are integrated or if I have to buy it separately?

Hi guys, just a quickie. Can you tell if the the Visonic Powermax+ Quickfit Kit (inc Wireless sounder)kit has the dialler built in? Can you set and unset via your telephone after an activation and can it send you a text message to let you know when the alarm is set/unset? I can't find any spec online fort his product. If you could email me a link that would be just as good. Have a good evening. Dan.

Hi, first post Can anybody tell me the recommended way of wiring a Texecom Premier48 and PSU200XP combination to the mains supply? Would each panel require its own fused spur? I will not be undertaking this work myself, but would like to have some knowledge of what is required before approaching an electrician. Thanks in advance.

Hi Does anybody know if the external sounder in the Pyronix Enforcer Kit3, ENF/KIT3-UK, needs a power supply? It looks as though it is just battery powered from the description. I know some of the other Pyronix sounders require power when they are lit after dark. Can anyone confirm please? Thanks

i am looking for a suitable replacment for a karizma + system that i installed many years ago, the system must use id type biscuits as the system was wired this way originally , can the castle euro one do this and if so can you supply it with a 125 khx prox keypad?

we would like to fit a wired Alarm system, we have made the following list of items We like the look of the scantronic 9941 box as we would like to put a TSD2 speech dialler on so that we can telephone and check the system remotely. > > We would then like to put a remote keypad in the porch area at the front of the house which we would like to have night set options. We would also like to have a personal attack button and maybe a keyfob to de activate the system. We would like an internal sounder but maybe this is built in to the system. > > We would like a siren and strobe sounder on the front of the building. > > Detection Points > > …

I am torn between the Pyronix 46 App, the HKC 1070 and the Texecom Premier systems. I want a hybrid system where I can have mostly wired sensors and outputs but with the potential for a bit of wireless. I'm comfortable with programming reasonably complex panels having done Texecom and Honeywell systems for my families houses. I've read a lot of great things about HKC on a Internet forum but I see you cannot connect the app to the panel without authorisation. Is this true? Can you provide this service?

Hi, I have ordered the Honeywell Accenta Mini G4 contorl panel with LCD remote keypad and is still waiting for the delivery. But my electrian has asked a question where should the control panel is located. He suggests to put it inside the cupboard next to the MCB board. However, I am thinking where is the internal bell? If it is inside the control panel, so I won't be able to hear the bell as the control panel is inside a cupboard and the door is shutted. However if the bell of the system is in the LCD keypad, there won't be any problem as it is located next to the entrance light switch. Qs: Is the internal bell inside the control panel? Qs: keypad descriptions in…

I can't find any Wired Siren for my Powermax Complete alarm. Do you have one, or could you recommend one?

i would like to know if Texecom PSD001 SPEECH + TEXT DIALLER is compliant with the French netwrok?

I have just received my scantronic 525r remote and would like to know to pair it with the control panel so I can use it.

I have a system in a gun club that uses the scantronic 9800 which is now becoming unreliable due to its age. It is also in a humid environment which does not help! I would like to replace the unit with a new one so am interested in the 9752. Could you tell me if this is a good choice and if it is then can I (not an alarm engineer but good with electronics) swop the unit over easily. Thank you for your advice. S. Cooke

last April it has worked perfectly. However recently, although it texts me on arming and disarming, if I try to control the system remotely ie arm, disarm, status it fails to respond. This was a relatively expensive piece of equipment and although just over one year old, I would have expected it to have lasted longer than this. It is operating with a Premier 24 panel (although only partially now!)

Will this door contact work with my Scantronic 500r.+ wire free control panel, as the 536rEUR-00 looks to be obsolete?

I am interested in this product https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/wireless-ia-c-36_60/takex-wireless-ready-external-pet-tolerant-12m-pir-dual-head-p-2040.html I want to buy two wired sensors: https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/movement-detectors-c-36_116/all-c-36_116_37/takex-external-12m-pet-tolerant-pir-dual-head-p-2038.html and two wireless sensors (the first link i just sent: https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/wireless-ia-c-36_60/takex-wireless-ready-external-pet-tolerant-12m-pir-dual-head-p-2040.html I want to connect those wireless sensors (as above) to a Paradox EVO 192 centr…

Hello, I have purchased a CQR 3/8 Flush Contact 1 RD 4 Wire White, but it does not work on my door. Most probably, it's because the gap est too large and the metal door interfere with the contact detection. I am looking buying a new flush contact. Which one do you recommand? You have so many. The installation environnement is: metalic door, large gap (difficult to measure, probably at least 10mm), if possible a contact with direct wiring. Looking forward your answer

Hi, I have the ADE honeywell accenta mini gen 4 with LCD keypad and as second pad I have the Simple Set Reader.Can I buy the ADE Infomaer speech dialler and use it on this hardware? I also want to buy a 16ohm internal speaker. Now I have set 2 programms, 1 for in the day when we are going (every PIR is on) and 1 for night use (all PIRs are on downstars but upstairs they are off). Now my Simple Set REader is upstairs, how can I program it that only program2 for night is on when I go with the FOB on the pad? Thanks

Folks, I am looking for a replacement keypad for a Gardtec 800 alarm system which is a 6 wire Gtag type. Can you help out please? regards, Brian

I am looking to upgrade my scantronics 9800 alarm system to remote control arm and disarm. I want to keep my exiting pir's and door contact and outside siren/ strobe box. Also I would like to keep the option of the keypad as well. I was looking at the LGSIX/01 unit. Will this unit do what I want. Also do you do any other remote control units that will work with this unit.

We have a Scantronic 9752 system with 2 9955 rfx expanders. The zone in the garage has a dual tech pir and transmitted using a 735r. About every two days we get a Sup Fail message on this zone. Distance is about 45 yards - easy line of sight and only a thin slate roof for the signal to get through. Suspecting the transmitter was not strong enough we recently bought from you the 703r transmitter and unfortunately still have the same problem. We tried the zone on both 9955 receivers which both show a signal stength of 6. So we have effectively changed the transmitter and the receiver and appear to have a good signal but are still getting Sup fail messages. Any idea what …

Hi There, I would like to use the Clip MCW PIR detector by Powermax with the Scantronic RFX08 radio receiver. The frequencies are compatible but will the two units communicate properly.

I would like to order 10x Optex VX402REC outdoor sensors. Please could you help put together a basic alarm systems as follows: 10x Optex VX402REC sensors Outdoor Sounder Indoor Sounder Key pad to disarm Please could you price for a reliable system and also could you provide a wired option as well as a wireless option?

good day would like to know how many door contacts can i wire together each zone of the euro 46s panel.