Intruder Alarms

enter engineer program mode scroll thru to P enter3 inhibit zones press x 3 times leave engineers mode system unset enter user code press p LCD still only offers set program 1 no other option offered

Hi I ahve just purcahsed a Eurosec CP8L panel and a Pyronix Databell Plus Bell box, and would like you to confirm connections as this configuration is not listed in the manauls CP8L Bell+ Bell- Bell HO Strobe + Strove - SAB Tamper In the bell T T STB BELL 12v+ 12v- In addition is it possible to configure PGM1 to give 0v in Engineer mode to disable the bell box tamper. Various settings sre listed but not this one. Any advice apprecaited

Hi, re the above system, can this be operated by remote control or can I somehow link it to a remote garage door opener? Alternatively, is there a system that can do this?

I have an old ADE Karizma iD system I would like to replace. Do you have iD systems in stock...?

Hi, we bought a menvier SD1+ speech dialler from your website last week. Upon testing it, our engineer found problems dialling out. Upon talking to menvier tech support he was told that it was from a batch that had been recalled and that we should send it back via our supplier. Our secretary e-mailed tecnical@securitywarehouse.co.uk this a.m., but no reply as yet. Pleae treat this as urgent as our client(unhappy!) has to have a member of staff on the premises until this is installed.

In november i bought a texecom bell box off you and its just stopped working. the rest of the alarm is functioning fine. when enter the eng code, the 05,54321 to test the sounders everything except the bell box works. it was working fine, so could i return it please unless you can suggest something to try? all the wires inside are firmly connected.

I am wanting to place an order but one of the items I want to purchase is a suitable motion detector for my timber workshop. Please can you advise me on what type of detector is best suited (most stable) to this environment where there will be temperature changes, possible insects and there is 3 windows. It is a good quality workshop like a log cabin, I have had a look at your sensors but I am unsure when it offers pir, microwave, dual tech etc ? Thanks

We are looking to put together a scaffold alarm using dual beam sensors possibly 6 sets with a control panel and auto dialler. What can you suggest please?

Hi, I bought a sensor scantronic 714REUR but i not able to associate with the central Homelink 75. I followed the steps in the manual: enter the menu to acquire the unit and then trigger the tamper on the sensor. The red activity led flashes regularly but not response from central. Other sensor i bought (738REUR) work correctly Thanks Stefano

I have a set of garages with two alarms installed that both join to a single masterblaster in the roof. I want a dialer that rings me or another member of the family if the alarm is triggered or the power is cut on the system. Sorry, I'm not very technical, but can the GSM dialer be connected in the roof space on the same wires as the masterblaster? Obviously the masterblaster will not work if the power goes down and so I wanted an autodialler as a back up. If so how much wiring would be needed and is it straight forward?

Hey there alarm been working fine an come home to the keypad display as follows Accenta G4 RKP F131-01-111 No lights on lcd keypad and no response from keypad been working fine for a year can send pics if it helps

Hello. Do you have an Intellisense IQ260 replacement/equivalent please. I have one in my garage, after doing some refurbishment to the building I was thinking of installing an additional sensor as a single one can no longer cover the area. That is if 2 pir's be installed in the same zone/room? an 8 core cable is installed however only 1 core remains unused. If 2 can be used on same cable maybe better to buy two identical detectors and do away with the IQ260? Thank you.

DOES ANY ONE HAVE A WIRING DIAGRAM FOR INSTALING DUAL COM

Hi, The strobe light in my Reson8 Bell Box will not stop flashing after fitting my new Mini Gen4 control panel. I've tried everything & double, triple & quadruple checked the wiring, spent hours trying to fathom it out, but it still flashes. I've had to disconnect the -strobe wire to stop the flashing. My conclusion is that there must be a fault with my new Mini Gen4 panel. Have you any thoughts please? Thanks David

How do you loop wire two Honeywell Intellisense IS215TCE PIRs into one zone when using a ADE Honeywell Accenta Metal Gen4 control panel?

I am having trouble with the Wireless sounder (MCS-710) in both set, they suddenly stopped working. The squawk option doesn

I purchased a Honeywell Accenta Metal Gen4 Control Panel and Viper GLX Shock Sensors from you a couple of years ago (Order #16133). I am only getting around to installing the alarm system now and I have a query which I hope you can answer. Before I bought the house, part of the house had already been pre-wired with 4-core alarm cable. One of the pre-wired zones at the rear of the house is wired with 4-core cable and the sensor points are linked in series, i.e. the alarm circuit and tamper circuit are both linked in series. The cables to each sensor are connected under a tiled floor, so the junction box is impossible to access without breaking tiles. As the sensor loca…

Hi, the last 2 kits I have ordered, ive got a problem with a white door contact, stuck on reed switch. and a Honeywell PIR that keeps flashing and not picking up and detection please can you advise many thanks

Galaxy RSS software and Management Suite. Wants to know the difference.

Hi I've installed the Scantronic 9651 with RKP 9940. and wired the panic button off the RKP but when i test the panic button, it doesn't work, any ideas i have two installs doing the same. San

I would like to order some Bosch Blue Line ISM-BLD1 TriTech Blueline Detector. These are available in three frequencies. I'm interested in the 10.525 GHz ISM-BLD1- F1 model. Would you able to supply this model ?

My daughter has bought a flat with a Veritas R8 fitted. The codes are lost. It will cost over

I have just completed an instalation of a accenta G4 from yourselves,on powering up i can reset the alarm by entering factory user code but the display on the 2 LCD keypads is all black squares,please can you advise any help checked wiring but all seems correct with panel and both keypads.

Need to replace Optex Wonderex FX35 PIR Please advise a replacement

I ordered the above Visonic MCR-304 Receiver from you and it was quickly delivered without any sign of transit damage. Firstly my thanks for your prompt service. I installed the item in the prescribed way and powered it up. I then set the Learn jumper into the Learn mode and the yellow LED flashed as expected. I then pressed the Tamper spring and the yellow LED and the red LED both flashed OK and using the tamper key I was able to cycle through the various channels. I then tried to associate/enroll a known good transmitter and in this respect I used a MCT-100. This transmitter was free standing and located close to the MCR-304 so range was not an issue. I tried to force …