CCTV

I have an Apollo 8ch HD series DVR with what I presume are analogue cameras, using balons with dome cameras and a 12v feed via the same cat6 cable. Will the newer HD dome cameras work with this set up?

Aspect L-TU-IP4M-Z-1 IP Camera Do you know default password? Will the camera stream in ONVIF mode, what decoding formats?

I am trying to find a suitable PIR detector which will trigger the alarm input on the Axis camera. 1) Is the Optex EX-35T a suitable PIR for this and would I also need the Optex Wall bracket to mount onto a wall? 2) Also, presumably this Optex PIR would need to be wired to a power socket and to the alarm input of the camera directly. Is there a PIR detector which runs on batteries and also transmits to a receiver which could then trigger the alarm input of the camera i.e. so I could have the PIR detector outside free of wires, and the camera inside triggered by a receiver powered by mains electricity?

Hi, I am considering purchase of 2 or 3 Axis 207 cameras. I need to be able to view the images on a single web page and set a feature to record if triggered by motion detection at certain times (ie after 6pm). Please could you advise if I will require additional software of any kind and also what is the light level 0.5lux? I nderstand this is low but can you give me some idea of just how dark this is? Many thanks Dan.

Hi, I am planning on installing three Axis 233D PTZs on poles to monitor a private driveway. I will be using Milestone XProtect to record the cameras permanently, but I'd like to add an IR detector to trigger an alarm in Milestone when motion is detected. I'd also like to connect a loudspeaker up to each camera so the monitoring station can give an audio warning. All the kit will be mounted 5m+ up lighting poles, with an IP66 enclosure just below the kit to hold a UPS and data switches etc. I'm leaning towards using Optrex LRP4010S IR detectors, and Bosch 35W Horn loudspeakers. Do I need an amplifiers between the Line out of the Axis 233D and the lo…

Hi, we need to replace a Baxall ZT4 cctv controller which is being used in a medical environment (to monitor patients undergoing radiotherapy), could you please suggest a replacement control unit / system. The technical requirements are short range zoom with up/down and sideways movements. Thanks.

Hi I am looking for a few black network CCTV for use with zoneminder. I have a server in my loft that will be capable of running zoneminder and I want to add some IP cctv cameras to it. There will be used outside and attached below the guttering and that has access back to the loft. Thanks Neil

Can you guide me towards an indoor camera which i want to use monitor my shop's sale counter so that i can have a look (remotely) that each and every costumer has paid the shopping bill to the sales man. I want to use zoneminder along with text base ubuntu server. ubuntu and zoneminder are installed on a vmware workstation (winXP). initially i want to use the same computer (winXP) which is currently used for billing but a separate system can also be installed (i also have a spare P-ii system with 256-MB RAM). I am trying to configure a capture card but ubuntu at VMware is not detecting the Philips 713x capture card (Tv tuner) which is i think due to conflict between WinX…

Hi Guys I need to install a CCTV at my local Chapel to cover 2 entry doors, their is no internet etc at the Chapel and the CCTV is to discourage kids breaking in and causing damage inside. Can any one recommend a suitable basic complete system. that is supplied by Security Warehouse Thanks for any advice

I called today and all your lines were busy. I am looking for a device to record someone who is damaging my customers property including a car which is parked outside their house. This device needs to operate in partial darkness. The image has to be good so that the police will arrest and a jury will be satisfied to convict. I can of course provide more info if required. Andy

Hi, Please can you recommend me a security CCTV system for a recording studio. I would like the following: - 3 cameras - would much prefer wireless so dont have to drill holes through walls - be able to record onto a PC, preferably with some kind of software that records "incidents" ? - be able to access video remotely from a different location - night vision is nice but not essential Kind regards Mark

hello... i'm looking to purchase 4 x PTZ external cameras, dvr, monitor, etc plus be able to monitor via my iphone.... just need to know what works with what.... many thanks!

Hi I am a residential customer, looking for a CCTV system, American dynamics I am aware of. I have a commercial background so do not want something that is ‘toys are us’. Initially I want two external cameras, 360 degrees, night & day, zoom as discrete as possible. They need to be hard wired to the recorder, which can then be accessed by wi fi but not wi fi cameras if you catch my drift. Also is the facility available for sound recording? I.e if someone is standing outside a property shouting is it possible to capture real time video and sound recordings that could be used in legal proceedings ? In addition to this I will be wanting an alarm I have used Banham in the …

On your web site you list a product SEA-HDD-SV2D which is described as aSV35 hard disk. The description does not identify the precise model of rthis disk. Can you please provide a full model number and say if it is IDE or SATA Can you also say if it is compatable with an everfocus EDSR1600 ? If not can you obtain copamatable disksd and again at what price. Thank you

Using Duo link and would like to use 4K cameras, will these work, if not how high HD will?

Eneo 4.0mm 520TVL External High res Day night camera c/w IR Leds https://www.securitywarehouse.co.uk/catalog/cctv-c-1/cameras-c-1_2/infra-red-cameras-c-1_2_86/eneo-40mm-520tvl-external-high-res-day-night-camera-cw-ir-leds-p-1955.html --------------------- Hi, what connector does this come with please? I have an old Samsung SDE3170 system and the wires are plastered into a duct in the wall. So I am trying to upgrade my cameras without having the pull all the wires out. The camera connects to long wires with a 6 pin connector and then on the other end to the DVR with a bayonet I think its called a BNC. If this won't connect maybe you can suggest something that will. I …

Hi on this camera (esp digiveiw 4 camera) system how do the cameras get there supply ? is it in the coax??? do i need a bnc crimping tool for this as well Thanks

I am interested in purchasing a new CCTV system. When I try to download the Data sheet for the "ESP Digi view 4 kit" I receive the following message, from Adobe Reader "The file is damaged and could not be repaired" Please can you e-mail me this information. Thanks

Hi, I've bought a second-hand Vista Viper HDAL 16, but I don't know the password - does anyone know how to reset please? Many thanks, Stuart.

Hi, I have emailed sales to confirm then price of these items and had no reply. Can you confirm the prices as: GQC4

Hi The guy I'm helping CCTV his store has bought some 1.5" x 1.5" cameras from china, and expects me to hide them.. Anyway, I've done one in a

Hi, I am looking for a 2 or 3 camera system for continuous recording, web access (via a phone app I assume?), and at least 1 solar powered wireless camera. Can you help?

Hi I am looking for a direct replacement for an old outdoor doom camera . It's and eneo edc-141e, any ideas?

we have a eneo ptz keyboard KBD-2 and the ptz cameras one minute it is over reponsive and the camera just keeps going round with no control to stop apart from gentle touches on the joystick to try to get it to stop rotation and other times camera rotates very slowly then to stop have to hold joystick in one direction to stop this then goes out of control could this problem be with the KBD-2 or the PDU-1 unit that the keyboard is connected to this is the first time i've seen this kind of unit in all the years i've done cctv. any help would be appricated very much as to what the cause of this problem could be and what we would need to do to rectify this problem for future i…

I have a Mitsubishi DX-TL HDD recorder, and i am looking for some replacement monitors as my current screens are getting a bit dark. The Mitsubishi has BNC connectors with 1.0Vp-p and 75 ohm output. The Secware 17" TFT monitor has a BNC connection but doesn't state the voltage or resistance, can someone confirm that the monitor would be compatible with my recorder. Thanks.