Access Control

Is there a Videx VR4K-4s with a number keypad

dear sir have just instoled a single door access control keypad with with a remote exit switch ,i have a problem wit h programing the key pad ,i have followed the instuction but with no sucees the remote exit switch works fine

Does the "Videx Boxed extension sounder for Video kits and DC kits -

does this product come with the frame pictured? If not how much is the frame?

I have a faulty act 2000 controller board on door 1. I have swapped the door inputs to circuit 2 but the door pass reader does not register teh card being used. Does the second circuit need configuring on the main system? If I replace with a new board, is it just plug and play or does the system need to be cnfigured to accept the new board?

Is it possible to replace the plastic buttons on the 3K2S

I am interested in buying the BPT basic system i.e the one you advertsie for approx

i am looking to put a wireless door entry system on to a gate that gives access into our delivery bay. the door bell i was looking at was either the fw/rc22 or rc28 combined with 2 internal sounders fw/uc260. Is there other system you feel may offer better quality or system

We have a Videx 3312 Videophone Monitor can we use a VIDEX 901 Door Entry Monitor Intercom / Videophone GWO instead, does it have the same plug in capability or would there be re-wiring involved

Hi i talked to Elaine on friday about getting some extra safty beams for the came 2 frog kit but she has not got bck to me yet any chance of a price i need 3 extra sets! many thanks Gary Read

Hi I have a MHF02X unit which seems to have died (power to it seems ok but nothing from the unit itself) before I replace it with a new unit is it worthwhile looking at alternatives or upgrades and can you advise please?

My elderly mother lives in a sheltered accomodation flat link to a mutiple door phone call and entry system The phone and entry system in her flat is near the front door and a long walk ( for her ) from the lounge Is a remote control possible that she could have near her in the lounge and whart would happen to the current one which she wants to keep Or is there another alternative please She has recently had a fall and getting up fom the lounge etc is a problem

I'm trying to source door entry parts manufactured by sentrymatic who now appear defunct. I need a compatible replacement for and a8 apartment station status amp/alarm acu1100 v19 PA8084 and a couple of handsets. Can you help?

I have been asked to source a replacement for a damaged BPT video intercom. ONce stripped the circuit board had the serial number VZ 110 and the video camera VT 100. The panel itself looks longer than anything in the present BPT range. Does anyone know of a direct replacement for this panel which is about 12" high. The reason I ask is that it has been mounted in a welded housing and would be a lot of work to retro fit with something else.

hi there, i would like to buy that came fast p automation kit. DOES IT LOCK ITSELF WHEN THE GATES SHUT? HOW LONG WOULD IT TAKE TO ARIVE WHEN I ORDER? WHAT IS THE DISCOUNT COUPON AND WHERE DO I FIND IT? please let me know. regrds kostas

Hi, i am looking for a euro cylinder 30mm/40mm to suit my existing keys and euro locks. Is this something you would be able to help with? if so what what i need to send you and aprox how much would this cost for your lowest price cylinder. many thanks, Nick Robinson

Dear sirs, I need to know more details about out put data format of these devices as I need to intigrate these devices with our computer control system Thanks

i have a garage , the garage is not connected to the mainbuilding. can i use a visonic remote to operate the garagedoor ? the door is operated by remote today and it has a switch inside the garage , one push opens, another push close the garagedoor. if this is possible, wich remote do i have to use and what do i connect the garageswitch to

Hallo, I was interested in the above device. I was needing a relay that would be voltage sensitive switch. Basically I have some electric gates that will have lead acid battery backup. I want to set the system so that if the power goes off and the voltage drops below say 10v, I can use a relay trigger to open the gates and hold them open. Can the voltage trigger on this relay be set to a specific voltage in this way?

We Have a BPT system installed at our main entrance and i would like to change the access code as we have had a member of our team leave recently. We have no documentation to follow to allow us to change the code. Please could you assist in this matter.

I purchased from you 2 intercoms : http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=134 I need one more but with 4 internal handsets.

Hi, is the Honeywell 20, (panel only) compatible with the RKPs and Proximity fob pads that I have with my Accenta G4 ?Thanks

I would like more details on the above lock, the description on the site indicates a weight of 4kg, the one we need to replace is only about 1/2 pound, could you let me know the size etc.

I have many ACTpro 100e devices connected to ACT Win Pro Software. This occurs in several places in Greece. How can I connect all ACTpro 100e devices->to local ACT Win PRO Software. and all these places to be controlled from a central location throught the web?. Explanation: Suppose you have an administrator software in one location, for all different cities in Greece. This administrator software must control through the WEB all ACT WIN Pro(s) (which 100e are connected with RS485) in all different cities. Which is the administrator software I can use? Please avoid teamviewer style software.... If I am not clear , for what I need tell me so...... Also I can provide …

I need a Videx CESVK-1-eclipse intercom but with built in keypad? As the picture on your website does not show a keypad i wondered if this was possible.