Access Control

Please register for a login for the Forum at http://www.securitywarehouse.co.uk/forums/index.php?action=register You will then have access to post questions. To post a new question, navigate to the area you wish to post your question and select the 'new topic' button towards the top right of the screen. Give the post a relvant title and enter your question / comment in the main area and press 'Post' Any questions then just email us at technical@securitywarehouse.co.uk

Audio only intercom, call box is on a gate at other end of school from where handset will be located. Is there a system where the call box and handset can plug into network points?

Hi, We have one of your door entry system at the front and back of our building. When our security night shift patrol the building, the buzzer system is linked to a remote Pager, which beeps when the entry buzzer is pushed. The make of The Beeper is Ascom and it has stopped working altogether. Can you please advise me where I can order another one from and if I order another one will the link still be there between the front door and the new beeper? Please could someone contact me regarding this See contact details below.

I am interested in buying an ACT 5 proximity reader for door control and was wondering whether the fob of my scantronic 9651 with 9943 keypad would work with this. This would mean I would only have to carry the one fob to open the door and set/reset the alarm. According to page 28 of the 9651 installation manual "You can use any industry standard ISO tag or card with the 9943 keypad" so I would guess the ACT and scantronic fobs are compatible but wondered whether you could confirm this please.

Is there a direct replacement for the now discontinued KPX947S?

Hi there, I have a client that requires 1-way video entry at two separate doors. The outputs of which are both required to be connected to each of two points in the building. Is this even possible and if so what kit would you recommend for it? Thanks.

We have been asked to quote for installing the following system at 2 x sites. ( one with 4 x flats & 1 with 3 x flats). Installation of access control systems to all flats and main entrances. Paxton Switch 2 controller unit in vandal proof housing 1no. controller unit to be installed in a secure/secluded location at each of the sites. Power supply unit ? 12v DC power unit in steel case PROXIMITY vandal proof reader 1no. reader to be securely located at each flat entrance and the main entrance door at each site. Site 1? 4no. flats + 1no. main entrance: Total 5no. Site 2 ? 3no. flats + 1no. main entrance: Total 4no. Electric latch ? 12v Fail open release kit …

We have been asked to fit a audio only door entry system to a school where the gate is at the other end of the building from reception where the handset will be, approximately 100m away (no line of sight). They have a network phone system which is being upgraded from analogue to digital shortly. Is there a system that could connect to their phone system? Or can you advise on the range of the wireless systems?

I am going to install a pedestrian gate at the front of my house to improve security. Can you please advise the best and most cost effective solution. I would like the following, either wired or wireless, specifications:- - weather proof lock - either maglock or electric strike - audio intercom and door bell with push button lock release from inside the house - hands-free proximity sensors for access from outside

Hi, We are looking to install the actsmart2 1070 prox-only or pin and prox please advise Personnal gate Using a magnetic lock push to exit button daitem cordless intercom For public Proxy 1070 for staff Drive gate adjacent to personnal gate gate automation to open / close gate Daitem Cordless intercom for deliverys Pin 1080 or 1070 for staff x 2 each side of gate Not install smart2\'s before just that the school as requsted the same system Thanks for your help and advise Phil

Is it possible to add extra hand sets to a BPT E/200 system please If so pat no.s as well please many Thanks

Hello. My BPT A/200N (number 61404810) has one internal phone wired to the intercom located next to the gate to our property (single dwelling). I want to add one additional internal phone in another room of the dwelling (three phones are possible). BUT: I cannot run wires for this new phone back to the BPT A/200N powwer supply unit. Please advise me what I should purchase from you to do to this by wireless. Many thanks, Glenn

I have the above item installed. the engineer put a t mob sim in with

I want to replace a white plastic audio handset in my hallway which controls outside gates. I have called BPT and they have told me that the replacement in their range is the Lynea YC200. However this does not look good. Ideally i am looking for some "stainless steel" finish or something a bit more modern.I do not want to replace the complete system. Is there a handset or panel that is more modern that is compatible with the BPT system?

Looking to update current system with the Bell BS4 Bellissimo 4 Station Video System

I am looking for BPT Nova 200 system. I saw one NOVA kit(

I would be grateful if you could pleas elet me know if you have any BPT NOVA 300 Video monitors in charcoal.

I am a designer who has redecorated a flat in London. During work the frame around the white BPT nova intercom has been mislaid. Please can you quote me to replace the white surround frame as soon as possible?

I hope you can help please. I have a simple set up of electrically powered gates with an intercom from the house to the gates. Various bits have needed to be replaced over the years so I cannot accurately describe the components. My problem is that the intercom no longer works properly. We found with some research that the entry and receiver volumes could be adjusted within the HA/200 entry module. Now with both set to maximum we can hear from the gates to the house (with some distortion and background noise), but not the other way. (The press buzzer works properly.) I think I need to replace the audio module which seems simple and cheap, but can you please comment. There…

I am interested in buying the BPT basic system i.e the one you advertsie for approx

Can you supply a weather proof proximity reader for use with a key fob.

I need 2 Fermax keypad modules. Fermax product code 2520. Can you supply and, if so, what would be the cost for 2 units.

Can you source the transformer part ART 850K and add it to your web site please?

I have a videx door entry system put in some 10 years ago. I am looking for a Videx ART 280n Telephone interface unit. Do you stock them is how muchare they.

Can you supply a bpt havi-200?