Intruder Alarms

i ordered a Texecom alarm R8+ in 2010. I setup the alarm last year. i got some PIR petwise frmo texecom. Well, i have false alarm during the night 1x / each month in the room where there is a sofa. I have 4 cats. I guess, they jump from the sofa. Do you know a trick to decrease the sensitivity ? or there is another solution / PIR to avoid those alarms to buy ?

Texecom Veritas R8 Plus Panel with LED Remote Keypad https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/security-control-panels-c-36_102/control-panels-all-c-36_102_41/texecom-veritas-r8-plus-panel-with-led-remote-keypad-p-323.html Does this item come with the necessary hardware to act as an autodialler

Veritas Excel CFE-0001 has a telephone connection ? I would like to be notified by telephone when the alarm is triggered

I assume with the keypad I 1. open cover 2. disconnect wires (making note of what goes where) 3. wire up new keypad 4. replace cover, enter user code and test alarm

This has to be a Grad 3 system. I need 6 shutter contacts, 2 recessed door contacts, 1 surface door contact, 4 cieling pir, 4 smoke detectors, 3 panic buttons, speeach and text dialar, 1 bell box and cover and battries, I also want a remote kepad so I can switch of alarm in stoarage area when needed. If I am going to have items on individual zones then wich texacom alram do I need. Most of the items are straight forward but need to know more about the remote keypad do I need to purchase some extra card extra. you can call me so I can explain to you thanks.

Good morning I wondered if you could help, we have fitted a ali door to a business which has a Chubb alarm system, and the Chubb engineer has said the below. "The lock or keep needs to have an integral micro switch contact on it to provide electrical connections. Giving common, normally open and normally closed options for the connection onto the alarm" I could really use some help with this from someone who knows, I do have pictures of the door if i can send them across to you. Wondered if you had i stock or could get what i need, Thank you

Hi There, I would like to use the Clip MCW PIR detector by Powermax with the Scantronic RFX08 radio receiver. The frequencies are compatible but will the two units communicate properly.

Will the COM-ADPT-02 allow the i-on30R control unit to adapt, to allow a com-data-wifi module to be added

Please can you tell me if you are able to supply a plug-by communicator for a Scantronic 9651.

Hi, Some advice please? Can you suggest which pet friendly PIRs are suitable for use with Scantronic 9448 panel which I am looking to purchase. Need a very compact PIR and noted the Texacom compact but is this only suitable for wireless systems as I noted from a search on the web that it uses a battery?

Will an inovonics EE1215 universal transmitter work on a pyronix enforcer V10 with no additional hardware needed ?

Are all in the list below list compatible with "Visonic PowerMaxPro"? - 2 Smoke Detector (MCT-425) - 3 PowerCode

Hi, We are a school with a primary, secondary & sixth form buildings, each with their own intruder alarm panel and we are looking for a fob which can be programmed to all 3 panels. I believe our panels are Honeywell Galaxy. Do you sell an alarm fob which can be programmed to multiple panels? I look forward to hearing from you.

I have concept 6 alarm panel with a remote keypad that is starting to go faulty.do you have a compatible ADE keypad that I can replace it with.

Good morning, I have just received a new 723r I purchased to replace an old one I'd had which was broken. Could you please advise how to connect it to my Homelink 75 unit, I've tried following the Homelink instructions but it doesn't seem to work. Thank you

I have a Visonic PowerMaxComplete system at home that I would like to connect to my PC to. Which of the following items do I require in order to do that, or do I need both?

How do the old buttons come out of the veritas 8 panel so I can put the new set in. I was hoping it would part from the front so I could just change number membrane, but not sure, thanks

Pre-Order Enquiry - Decoy Bell Box Do you sell a Decoy Burglar Alarm Bell Box that includes a mains powered light (such as a faint blue flashing strip light) that is always active ... and mimics an actual bell box. If so, please could you let me know the part number etc. If not, I would be very grateful for any suggestions ... such as modifying a standard decoy box? btw. Does 'Sigma' still exist or taken over? I installed a sigma system years ago and have tried to buy similar kit. Many thanks for your help.

I have an accenta g4 alarm system and would like to be able to arm/disarm it using mobile phone. Please can you let me know which diallers I can choose from that would be compatible? thanks

Can I connect a telephone dialler to the Optima 8EP396A . The instruction manual says the communicator is not fitted to the Optima Compact.

Can one of the speed diallers you sell be connected to your ADE Honeywell Optima Compact Gen4 panel?

Dialler with gsm backup if bt line fails.

Hi can i fit a dialler to a scantronic 9651, or can you suggest somethink.

What is the minimum signal of digi gprs to be considered good

I want to order the following items [Honeywell ADE Informa Speech Dialler & ADE Honeywell Accenta Poly Gen4 with LCD Keypad & Bosch Blue Line ISM-BLP1-P Pet Friendly Blueline PIR Detector & Honeywell AG8 / WB ActiveGuard External Siren & Secware 12v 7.0A/h Value Alarm Battery & Honeywell Flexguard Glassbreak Detector], please could you tell me do Honeywell do smoke/fire detectors to add to the system ? Also are all the components listed compatible? Thanks David