Intruder Alarms

There is no telephone socket near by so want to link to WiFi network and get notifications via mobile app. What system is there available.

Does anyone know how many PIR's can be connected in series together in one zone of Scantronic 9448EUR-90?

hi i was have a look for a couple of pir for my alarm system as the one i have are about 12 years old and lok like they need replaced could you please tell me if this ones ESP Quest 14m PIR will fit my alarm system it is a GARDINER TECHNOLOGY GARDTEC 350

I am comparing the Galaxy Dimension with the G2-20 and G2-44 panels. Somewhat ironically, I cannot find the dimensions of the Dimension control panel box. Do you have this information (assume the GD-48 if other variants are larger)? And can the the inputs on all three panels (G2-20, G2-44 and GD-48) be expanded through adding a card into the main control panel box or is it necessary to fit another box? Thanks Tim

About to connect my visonic powermax complete to the telephone. According to the picture in the manual its just to plug in. But theres just two small holes. The telecable dont have pins. What to do? I havnt seen such a cable before is it typical UK?

We recently purchased a system which includes 2 x Pyronix Deltabell and a honeywell ADE GEN4 metal system. When reading the Pyronix data sheet it states that the bell trigger to the Deltabell must not be in paralled ( ie from one output ) two outputs must be used. The problem is I dont think the GEN 4 panel has a second bell output terminal, or have i missed it? As the deltabell is class 3 we have to install a resistor (4k7) from the +ve to the bell trigger ( to give it aprox 2v or above during normal mode ). With one deltabell this works fine. How should I connect the other deltabell? would a solution be to install a 2K resistor in place of the 4K7 and set both bells t…

I can quick arm by pressing the Area button on the way out. I can also quick part arm by pressing eg 1 then Part or 2 then Part. This is all great and makes it very convenient to use. But.... If the system has been set to part arm overnight, someone comes downstairs and unarms it by typing user code. Then we leave the house and press Area to quick arm whole house. The system seems to "remember" that the last arming was part arm, and so even though we press Area for whole arm, it then sets a part arm. Pressing Reset a couple of times before Area seems to do the trick but is a pain when you forget. Maybe there is an option that I can't see in the prog…

PowerMaster 30 0r 33 + 2-way communication I have a phone line and modem next to box House and garage 1 PM 30 or 33 (IP) 3 PIR (Camera) 1 Dummy + Flash 5 x PIR (2 x Garage, Kitchen, Dining room, Landing) 1 X Key pad 1 x Siren with flash unit (main building)

I have problem where the dialer will dial out when made to do so through test setup/Engineer mode no problem but doesn't dial when the alarm is activated. Is this Informa faulty?

Do you stock the additional PIR for the Electronics Line Infinite Wireless Kit, if so at what cost?

Just installed my 1st panel (in my own place)!! All seems to have gone ok but I'm wondering what to use for the "loop" connections between tamper wires. I've got 8 zones to link and "choc block" (aka terminal strip) seems a bit excessive. What have you used?

I have an Accenta G3 alarm with two unused zones and would like to extend the alarm into my garage with is inbuilt. There is a single wall (thermal block) between the garage and the location of the alarm panel. I would like to fit a door sensor and a PIR and also fit a very loud sounder in the garage. I have some basic door contact switches and have been looking at one of the 4 way 'sound bomb' sounders. Would these be suitable? what PIR type would I need there are no appliances in the garage. Also is there a cage available for the sounder as I wouldn't want someone to be able to just whack it with a broom handle to silence it? Any help appreciated…

Good morning, I have just received a new 723r I purchased to replace an old one I'd had which was broken. Could you please advise how to connect it to my Homelink 75 unit, I've tried following the Homelink instructions but it doesn't seem to work. Thank you

I lost the EOL resistor for a viperGLX; that should go from +12v T5 to FTA T8 as viper instructions. Can someone tell me what value the EOL Resistor is required. Instructions seem not want to tell? Thanks Oz

Hi, I’m thinking of installing a Pyronix wireless security system with live alarm boxes at the front and rear, including 4 pet friendly PIRs and 3 door contacts. I would like to operate the alarm from my phone. What price would the system be and could I come in to you office to discuss. Please advise.

I require a wired alarm system supporting a minimum of 8 detectors with the following key characteristics: Ability to set/unset using the lock on the final exit door, eg using a Chubb 3G114 Single Pole Shunt Lock or similar If the alarm is activated the ability to disable the strobe (in addition to the sounder) after a predetermined period of time, so there is no external indication of the alarm having been triggered Can anyone please recommend the a control panel / sounder combination which is able to support this configuration Many Thanks KB

I am currently using standard 2 wire (common tamper) and have linked the unused zones which seems to be working but the engineer manaul says 9(eol) wiring is more secure, I am thinking of changing it to use eol wiring(I am using eurosec PIR without fault or mask terminal), if I do this then it would leave me 2 unused zones plus unused tamper(which becomes 9th zone), do I need to link them as before or do I need to link them using some 4k7 resistors as the other zones? also in the engineer manual it says you should select 9(eol) in the wiring option(page 23 of manual) and then normal (standard gardtec wiring configuration without mask or fault detection) but then it says i…

I'm looking for an external siren and/or strobe light compatible with the Scantronic 500r+ alarm. Do you have such products?

How do I change the bell time on a honywell ADE gen4 alarm panel, as Page 25 of the engineer's guide is next to useless, do i need to be in engineer mode? I would like to set the time to about five minutes.

can the texecom com 300 model cea-0001 fit into a tex-dcb-0001 panel please advise

TKC 12v DC Relay - Handy Little Relay can this function as a self actuating bell unit - ie: senses voltage failure and activates a relay to sound bell/trigger event? If not do you have such a unit?

I have an old (broken) Honeywell optima system and want to replace it with a new control panel, remote keypad, upgrade to the PIR sensors that are both microwave and I.R. and also have SMS alerts when there is an event, so I was looking at your website and saw you have a *lot* of things... just wanted to chat about what solution you could recommend. (I'm in the north west)

I'm new to this forum and although I tried to read several posts I'm not sure if I came across this topic. I'm thinking of buying the G2-44 for domestic use. On deciding which wired Motion Detectors to choose I'd like your opinion on which brand: Would you advise to stick with Honeywell products (such as the DT 7550A) or would other products such as Rokonet iWise DT15, Pyronix FPKX15DT3, Bosch TriTech, etc will do a better job and fit better with the system? I'm open to suggestions... Thanks!

I am trying to buy 25 pieces of the Yuasa NP7-12 buy your system restricts to only 5. Can you help?

I installed a system a year ago which I purchased from you and it seems to have developed a fault. Initially when a walk test was done it wouldnt identify some of the zones and then removed the cover from the unit and I cannot get rid of the cover tamper warning so cannot set the system. Do you think the control unit has gone U/S. steve