Intruder Alarms

SInce i live in Sweden i have a Swedish system. Its a Visonic with a builtin GSM. Not sure what that model i called in UK since the alarm doesn

Hi, Some advice please? Can you suggest which pet friendly PIRs are suitable for use with Scantronic 9448 panel which I am looking to purchase. Need a very compact PIR and noted the Texacom compact but is this only suitable for wireless systems as I noted from a search on the web that it uses a battery?

Could you please help me and tell me weather a dedicated phone line to the dual com communicator would be affected by a BMS system using the same line for data only

Hi could you please give me some advice on adding a proximity reader key pad to a honeywell accenta g4 if it is possible or not and part's needed

I have purchased a belle and two twin alerts by pynonix (order no 33462) to install on a scantronic 9752 panel. Neither the scantronic nor either belle/twinalert manuals match each other so would like some guidance on wiring these up. The scantronic manual has the following output:NO1, NO2, Tr, 12V AUX and 0V, and a separate +, and LS for internal loudspeaker. The belle has B-, B+, BA, STB, SPARE, BT and TF, The twin alert has 12V+, 12V-, SPK and BA The belle shows the following connections for scantronic: B+ = 12V B- = 0v BA = BELL STB = STROBE- BT = TR TF = 0V The TwinAlert has: 12V+ = +12V 12V- = 0V SPK = SPKR (low) BA = BELL The s…

Is it possible to use an app for arming/disarming an premier Elite alarm, without being connected to a control central ? I know it is possible to control the premier elite with ComGSM and text messaging, but is it possible to use an app with ComGSM, without being connected to a control central ?

I have EATON SECURITY building alarm system …with Eaton Speech Dialer model TSD2-UK …however the telephone lines are now been replaced by digital phone via internet hub…so this will no longer operate. Could you please advise new EATON Speech Dialer using SIM card or other as a replacement…may need external aerial to increase range/ signal. Do you supply necessary SIM card ? If not who would your company recommend. Many thanks your support and advice is very welcome.

can you tell me if the Flex 20 Mk7 can have a lan connection plugged directly in to the unit or do i need to go through a wall port connection? Thank you https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/security-control-panels-c-36_102/1124-input-zone-medium-c-36_102_103/honeywell-flex-20-grade-2-20-zones-metal-box-mk7-p-5337.html

Can you get a larger ampage model? Is there any advantage in getting a larger ampage model, I am wanting to run 4 sets of Takex 100m Ext/200m Int Intelligent 4 Channel Quad Beams through it. Can you recommend what batteries I should use?

Please advise what is meant by - A siren can only be learned in starting version Y51.

I am considering buying and installing the following home security kit with some additions at the bottom*: 1 Honeywell Accenta Gen4 Mini Control Panel (8SP399A) 1 Honeywell Accenta Gen4 LCD keypad 4 Bosch Blueline Pet Friendly 12m PIR Movement detectors 1 Honeywell AG6 SAB and Cover (Blue Strobe) 1 100m 6 core Intruder Alarm Cable 1 Secware Value 2.1 A/h Battery 1 Surface Door Contact *1 Honeywell ADE Informa Speech Dialler *1 Honeywell AG6/WH Dummy Bell Box *1 Elmdene QSC Door surface contact Can you please ensure that all parts (*) are compatible to the kit especially the speech dialler. Is it complicated to install? Do you supply installation manuals wi…

I'm looking to buy some visonic k980 wired pir's can't seem to find them on your site. Do you sell them? and at what price?

i have paired my deltabell external sounder (see previous posts)problem i have now is whenever i enter my alarm code - the external sounder goes?when i do enter the codeit does bring up a message on the displayTesting....and then the standard now arming message...there is no alert about the external deltabell being triggered on the display panel and re entering the alarm code does not turn it off either. i have to access engineer menu and and exit and then it says 'saving nvm data' and it turns offproblem i have is i cannot set the alarm in either of my zones without the external sounder immediately going off?any advice on how i can fix this please?

Can you tell me if there is any benefit to having an mcs-730 over a mcs-710 other than being 10db louder?

I am only using 6 zones & no PA. I have programmed zones 1-6 as used and 7 & 8 as unused. When I try the Walk Test as soon as I input '0' for the test, zones 7&8 LEDs light up and an intermittent tone sounds. Any ideas??

I accessed your ecommerce from the zoneminder website, I would like to ask if it is possible integrate this sensor Model: SECWARE D20B to ZoneMinder and how.

I have a couple of questions if anyone can assist please before I order. I am using 3 x tritechs in house (a little ott but for pet tolerance) - I also have a conservatory that gets very hot but will not have pets. Should I just use another tritech or would a DT7450 be better? Has anyone used the Texecom Odyssey 5 compact or is it best to stick with full size? I have 3 x M12 smoke alarms on 1 zone and my installer doesnt have much experience of fitting these when using resistors. He was going to check but can anyone advise what may be required else we will just wire the whole system with seperate tamper circuit. thanks

I am keen to purchase a Texecom Veritas Excel Panel with LCD keypad and an additional LED keypad for a second door. I see your kit includes the LCD keypad and I can order a second keypad. I already have one R8 Plus installed and can program these. I am also keen to obtain the PC-COM cable to make programming easier. I have found one on your site. I wanted to ask if this was compatible with the Excel panel and also if the software is supplied or easily downloaded. I would also like to order a 12v battery for this. I can obtain this from you or from local Maplin - i would prefer to order all from one place if I can. Finally, I already have PIRs in place as this will…

Hi, wondering if i could get some help setting Honeywell ADE Informa Speech Dialler. it works as normal when the alarm goes off.but how do i acknowledged the call and stop it to keep calling. Is there a technical help line where we could call and speak to someone?

I'm looking to update a wired system, new control unit and 6 PIR, (the existing door contacts and panics will be unchanged) any suggestions on most reliable and simplest models. It seems Texecom and Pyronix are the most reliable but which models and which PIR's for domestic use bells only with 2 Zones and approx 14 items on it??

Hello, we have just had an outside office built - detached from the house by 1m. We currently have an Accenta G3 hard-wired panel with three spare zones. If I purchase Texecom GEC-0002 Ricichet Expansion pack and three Ricochet PIRs, will it allow me to attach the three wireless detectors to the spare zones? Your advice would be most welcome.

We currently use the above keyfob to disarm our alarm system. How do you pair the new fobs to the system?

Pyronix V2 GSM. I have 4 different voice messages on 4 different inputs. On activation of any input the first number is dialed, answered and accept code submitted.When the call is ended the dialer recalls three more times with the other three messages and the accept code has to be entered for all three.How do I stop the dialler making 4 calls for everyone alarm

Having some frenchdoors replaced but the old sensor broke so can this sensor also be wired to my existing alarm system Veritas system Aritech GS612 Shock Sensor https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/misc-detectors-c-36_84/aritech-gs612-shock-sensor-p-3509.html

is a prestige QD PIR compatable with a Texecom Veritas control panel, with the corrct value of ELO resistor added at the connection terminals?