Intruder Alarms

What USB to 232 cables are people using for G2 compatibility? It seems that my dimension USB cable will not play ball with the G2 panel. Works fine for dimension panels and associated 232 cable, just not the G2 panel and cable., Thanks John

hi. this dialler has been on site for a few months. originally we had a pay as you go sim card in and all worked ok. for ease for the customer we have replaced this with a contract sim card. i have checked the sim in a phone and all working fine however the dialleer will not see the sim card. i have spoken to jgd. who have advised mE. still the unit will not see the new sim

I have installed the gen4 alarm and then have just bought a extra keypad to add on to the system. I had a led keypad which I have know used up stairs,and the new keypad is a LCD which is down stairs. do you have to stick to just led keypads or can you mix led with LCD. when I wired it in it blew the fuse on the board and the battery fuse blew,I replaced the fusees and the transformer got rely warm,also came up with tamper fault lockout on keypad.I then disconnected the led keypad,and left the new LCD keypad connected to the system.the system now has no power to it,but still works on the battery power.have checked the wiring several times through the process but cant ex…

Hi I am looking for an alarm for a workshop/shed, 1 opening window, 1 fixed window and double doors. I have used Scantronic previously and therefore would like the following:- Scantronic 9448, with 2 contact switches, a glass break sensor, Elmdene INT400 and a battery. (I have avoided PIR\\\'s because of false alarms) Could you advise if this is suitable or are there better options, please advise battery type for above.

Hi, I'm looking for some advice, my domestic alarm died on me early hours the other day, control box has gone, wont power on at all. I'm looking to replace it, and was thinking about the items below, 1..ADE Honeywell Accenta Poly Gen4 with LCD Keypad 2..ADE Honeywell Informa Speech Dialler I'm planning on using the exisiting PIR's, internal Door Open Sounder and New Texecom external Sounder, I'd like to tie my garage into the alarm system if possible, what would I need? So 3 x questions 1.............Would the above work with what I already have? 2.............We have had a new Wood effect UPVC front door fitted, and the old door sensor is whit…

Hello - in the description to "Knights Plastic Single Push Panic Attack Button" you mention the CQR product "PA Plus" panic button. I am looking to purchase the model with LED and double-push action. Do you carry this item? Thank you

Hi, I am installing a Honeywell G2-20 alarm system at my home. I currently have two iWise 800QG3 movement sensors and am looking at installing an additional four to the system. I am considering purchasing the following detectors. https://www.securitywarehouse.co.uk/catalog/bosch-blue-line-gen-2-bld2-pet-tritech-blueline-detector-p-2392.html I understand TriTech is the best class of motion sensor to reduce false alarms. Is this sensor recommended or would you recommend something else? Any advice is much appreciated. Kind regards,

I'm having some problems in getting the CQR SC517 to work with the Premier Elite 48 panel. 5 contacts work as intended and they are setup the way that I cut T1,T2 and the red wires giving the correct restiance towards the Texecom (Double Pole / EOL), in Wintex they work perfectly. 10 contacts do not work, gap is the same between the contact and the magnet 6-10 mm. The do not work, same resistors are cut. In Wintex they report tamper alarm. Any ideeas ?

i order from you 2 powermax plus they just arrived thank you i would like to ask you if you know 1. how can i set a PIR( zone 3) always bypass at the night? i want to press the button on the keyfob and set it bypass I can not find the instraction in the manual) 2. how can i setup the 4th key on the keyfob * ?? 3. witch pir with cable can i take from your store to use it with powermaxplus? 4. witch internal sirin with cable can i take

I have fitted a wired intruder alarm system within my house and wonder if you could confirm I can install a wireless detector in an external building with a wireless receiver next to and connected to the wired system panel. If it is possible could you suggest the equipment I would need. There are spare zones on the wired panel and I would only need one zone on the wireless receiver.

Hi, i recently ordered some extra window/door sensor and an external siren for my Visonic Power Master 10 ADT Branded alarm. I have added a few sensors in the past with no problems but both door switches and the siren will not communicate with my alarm panel. When I add the device and press the auto-acquire button on the new sensor the panel tells me it is not a compatible device. So i tried entering the 7 digit number and now the panel said it is not registered on the network. Thinking it may be my panel at fault i tried to register them on a neighbours panel with the same results please advise?

can the texecom veritas panel have a remote keypad fitted to it?

i can't find anywhere in the settings for the display to stay on? i went to screen display and everything is selected YES after a while it times out until i press the keypad... can anyone help thanks

I am sorry to bother you again. Can you tell me please is it possible to get a wireless sender and receiver to fit inside the VERITAS R8 control panel as we have a garage that was alarmed that way as it is detached from the house and the old wireless sender is not compatible with your system. Also is there a code to open the panel to replace the battery as the installer took all the installation notes with him and he has gone to Australia for 3 months so i cannot contact him.

I have stored a number of items in my cart and I would appreciate some advice as to whether these are all compatible or if there are better alternatives available that would work with the main system. I have a hybrid wired/wireless system with existing PIR's and magnetic contacts in place but I am expanding the system and finally installing the panel. 5 x - Honeywell Four-button compact two-way keyfob 1 x - Honeywell Galaxy Flex 50 Panel with MK8 Keyprox 1 x - Microtech Galaxy MK8 Keyprox LCD Keypad 4 x - Honeywell Wireless Dualtec 15m x 18m Pet Immune 5 x - Honeywell Galaxy ASK Keyprox Proximity FOB 1 x - Honeywell Galaxy / Dimension Boxed Power Supply Unit 4 x - Ho…

Hi, I was wondering if anyone could help me decide on a simple & effective alarm system. What I need is listed below. 1) 1 door contact 2) Minimum 2 PIR's (wired or not) 3) Key fob to de/activate alarm 4) Some sort of notification on activation (email, text/call) 5) camera that can record images/video when there is motion and the ability to send the images to a phone AND be viewable over the internet Ideally, I'd like the system to be controllable remotely and have as little wiring as possible. I have made allowance for 2 cat5 cables to the 2 known Camera/PIR locations. (Depending on the cost, I might also include a door peephole camera - again, I'…

We are a smart home company just starting to install security systems as part of our AV and music systems. We are looking for advise on how best to put a Texecom system together?

Can you suggest a package to provide 3 x independently switchable on/off beams of 12m, 9m, 6m span with a control panel and sounder. The sounder to mute after a preset time. the system to be mains/ 12v powered. The detectors to be preferably powered from one end only of each beam. As cheap as possible, p.s. external use near the ocean.

Hi I am wanting a No. 1 biscuit for a Karizma Plus alarm. Are the ADE ID biscuits 1-10, red, the ones which I need? I only have 10 access points at the moment and have no plans to add more.Thanks

Hello. Interested in installing an alarm system. Such as Electronics Line Infinite Wireless Kit can you tell me if i can change options and replace the PIRs for Door Connectors? Does the external box sound and is this wireless too? Basically what I want is wireless system, 4 Door connectors, outside box, GSM to alert of event.

Are there any other simple alarms which are able to be controlled by an app as the Flex is? We are currently looking at the Honeywell Galaxy Flex 20.

Can you suggest some compatible, either a wired or wireless Panic Attack alarm for the purchased Secware Optima

I have fitted the above on a upc window. 1. the led is continuously flashing. Is this correct? 2. The unit is fitted to the position A at right hand side of the frame and will alarm on tapping the right hand panel but not when tapping the left hand panel. Are two units required on the window frame?

Is the MCS730 compatiable with the powermax + panel?

I am assembling the individual components of the Optima 4 kit minus the SAB strobe. I am substituting the Odyssey 3E, as I already have the diamond shaped cover. I have found all the components but not an exact match for 2.1Ah battery and surface door contact - could you advise which battery model and which surface contact model I should order?