Intruder Alarms

Hi I have an accenta mini g4 hard wired 4 PIR and exit door magnet my panel shows unset when I enter my code zones 1 6 7 8 light up and I have to omit these zones and press the tick to set the alarm which means the entry/exit is omitted I do not have any tamper wires connected to the PIR or door or the panel the only tampers that operate are the bell box and panel cover. the alarm works fine when the zones are omitted Can anyone tell me why zone 1 keeps lighting up and showing alarmed as this is the entry/exit please help!

I have an Excel box with a standard LCD keypad which all works fine. I want to add a second keypad and it’s from the Premier range (with key fob) but I can’t find anything that says it’s compatible . It uses the same four connections but has additional connections for two zones too. Does anybody know if the Premier keypad is compatible with the Excel box

Will you be stocking the C079-2 RF portal? The only portal listed is the old one.

We have a Visonic WR200 (418) receiver that in turn connects a hardwired alarm panel; this receiver is used to link another panel in a separate garage. We

Hi, Can you advise on a simple and robust wired alarm for a cold and damp Scout hut. I will be installing it myself but I don't expect major problems with that side of things... We need: 5 PIRS 1 key pad 3 door detectors 2 external bells (preferably) 1 dummy box 1 internal sounder and about 200m of cable No need for distinct key codes or anything like that. Thanks

ooking to buy a Secware Basic Full Kit Accenta, 2x PIR, 2x Contact, 1xSAB Need extra RKP and door contacts. Could you please advise which parts are the same as the kit

I can't find any Wired Siren for my Powermax Complete alarm. Do you have one, or could you recommend one?

I am looking for an addressable Intruder Alarm System. I have already passed a 2 core power cable and 4 core looping from each PIR. Can you please guide me to find the correct system? I also need to connect an access control system with the intruder alarm system. Will look forward to hear from you. Thanks and Kind Regards

Hi do you have a comms lead for the 9850 scantronic control panel 8 pin ? we have the 9800 12 pin version as shown on your site Many thanks

The sounder on the control panel works correctly but the remote keypad emits no sound at all when being used to set the system. Is it a setting problem, a wiring problem or a defective remote keypad?

This topic has been moved to Website Issues. [iurl]http://www.securitywarehouse.co.uk/forums/index.php?topic=456.0[/iurl]

All i need is a powermax Plus panel on its own , i do not want a kit. Can you stock just the panel only?

http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=542 Is this graded? If so what grade?

I wonder if you could help. I have a number of Aritech GS610 window sensors fitted in my home but they are not connected to the alarm box. could you tell me please which of thr 4 wires are power supply and which are sensors?

I have an 11 year old scantronic 9930 fitted professionally and serviced. I am about to purchase a replacement keypad. However with regular power cuts here my alarm now triggers outside bell very quickly and will not go off for 15 minutes, i cannot reset. Also the display shows better missing even though it's not and i have checked all connections which are fine, also the battery is reading 12volts on tester. The only thing i noticed was split at bottom but, NO leaks ?? so why is it showing message and a 12volt reading on tester. Can you advice please as i don't want to waste money on keypad and battery if it is something else.

Hi All, I have an old Siemens IC60 panel with 3 wired keypads, 3 wired sensors, plus some wireless stuff (Sensors, Smoke detectors, keyfobs etc..) I also have some z-wave and 433 home automation stuff running under vera edge and domoticz. I am looking to upgrade this to something more modern. My main requirements: - IP connectivity so I can monitor remotely - 3 wired keypads - Images / video on movement when armed - but want to avoid standard IP WIFI cameras inside my home. - Easier to arm / disarm (RFID, keyfobs, Bluetooth proximity etc) - Ability to view video / images without a phone - If I am in bed, and the alarm tr…

Hi Im looking to connect a module to an intruder alarm to send a signal to a panel when the alarm goes off. Is this possible with something like the Flex trigger module?

hey, I currently have an ademco accord security system installed in my flat and the transformer has stopped working. I have recently just purchased a scantronic 9448+ and i was wondering if i could take the new transformer from the scantronic and put it in the ademco system so i dont have to rewire the system? thanks in advance

I plan to buy an Optima Gen 4 security panel and would like to know what size battery/part number this unit takes so that I can order this at the same time.

I have a texecom premier which has alarmed but I cannot re set it as it looks like it may need an engineers code. Is there some way of re booting it to put it back to factory default codes. If not, rather than call out the alarm company is it possible to just replace the control panel. Do I need to replace the local lcd keypad as well. If I disconnect the control panel to replace it will the external siren go off? Regards

When will you be able to sell the new MK 8 keypad for Honeywells Galaxy-range?

Purchased a 760ES and has the following problems; "The Siren is proper teached to the Control Unit with a high signal level. The Control Unit respont correctly to the two tamper switches wehnever they will be activated. The Siren dosen`t sound and flashes. It also dosen`t sounds when the Batterie will plug in. (referring to Info on Page 3 Installation Guide) It doesen`t sounds and flashes when the tamper switches will be activated." Can you confirm if the Siren would be faulty?

Good morning, I've bought a GalaxyFlex and a RF Portal from Honeywell which work like a charm I would like to add some Wireless shock/vibration sensor with Door Contact in my house. I've bought the "Honeywell Le Sucre Wireless Shock Sensor with Contact White" ( Model: SHKC8M ), but it's quite big. I would prefer something smaller, more discreet , like the Honeywell Wireless Door/window compact magnetic contact Brown ( Model: DO800M2 ), but with the shock sensor feature Could you advise me another product (shock + contact) which would be compatible with the GalaxyFlex ? Thanks in advance for your help Cedric

Can you kindly confirm that the Bosch Blue Line Gen2 Passive-infrared Detector, that you sell, would be fully compatible with my 9651PD-41 Grade 2 8 zone Panel that I purchases from you a few years ago?

Hi i would like to buy the gardtec 595 with 5 motion detectors and a siren which should be high dbl? What is the price for the system and will you deliver it. i would like the fobs with it and the card to arm it and dis-arm it too, does this come with the kit? Can you give me full price with delivery? Regards