Intruder Alarms

This is similar to another post below, I too have a texecom veritas system which is faulty, I have called their support desk and there are unhelpful and ofter cut me off if they can't find a solution. I too am ready to replace, I have been looking everywhere and tempted to get a professional around to install a new system but prices are unjustifiable, four figures to takeover an existed wired system and replace the panels, I think I must be paying for the Nacass approval badge!! I am about replaced all my working PIRs with a Bosch BLP-1P pet friendly ones. I need to replace the system, the reason is the guy who installed it last year couldn't get the two bell boxes t…

I have an application where the customer has a wired system and wants a sensor put on a door but doesn't want a wire running across or in the wall. Is there a wireless door contact that can tx to a receiver that interfaces to the wired system ? Regards.

Do you have Visonic Powerlink Pro in stock and what is the price incl. shipping to Sweden?

my neighbour has an old ati 6000 alarm system, he has the box under the stairs with a piezo buzzer next to power then 2 wires one to bell and one to keypad at door with 3 wireless PIR's. i was thinking of changing it over to ADE Honeywell Accenta Mini Gen4 with LCD Keypad and a new bell box, but can this unit support wireless pir's with a receiver addon? could you detail kit required and price. CP, Keypad, Bellbox, 3 x wireless PIR's, wireless receiver?

Hi, I'm looking at installing two alarm systems for elderly relatives due to recent break ins in the area and wondered what you could recommend with the following criteria. Property one: wireless system with either prox sensor built in with the possibility of adding a remote one or control panel with two remote prox key pads. 3 wireless magnetic door contacts. 4 wireless PIR wireless external sounder. Property 2: wireless system with either prox sensor on control panel with the possibility of adding a remote one or control panel with two/3 remote prox key pads. 2 wireless magnetic door contacts 4 wireless PIR Wireless external sounder. These systems need to be very…

What is the minimum signal of digi gprs to be considered good

I want wireless system: Main factors are Reliability

I need a loud internal sounder to go with a Accenta Mini Gen4 - could someone recommend one as I have never fitted an additional sounder before

The wiring diagrams are unclear for connecting the panel to the external sounder/bell box. The connections on the bell do not relate to the bell instructions. Can you tell me how to connect the two. On the ADE GEN 4 panel i have..... STROBE +VE STROBE -VE T A D B On the bell i have..... ST- R- SW- V+ V- Please tell me what connects to what........

Hi, I have a fully wired house system. I need to add another zone to a remote building, a garage, and to run a cable is not really possible. Can you recommend a wireless add on Tx/Rx. The zone will have just two door contacts which can be wired in series. the garage does have mains power if required. The garage is about 80 feet from the panel and has direct line of sight, that is to say no major structures to weaken the signal. many thanks

Can one of the speed diallers you sell be connected to your ADE Honeywell Optima Compact Gen4 panel?

Hi My 13 year old Omnicron 7000 panel has finally given up the ghost. I am looking for advice on a replacement which will require minimal changes to the wiring. Any suggestions very welcome. Paul

I have a faulty 9448+ style panel, could anyone advise me on a like for like replacement so i can undertake to job myself, many thanks smash0007.

This kit does not show a power supply, how does the system get its power?

I think I need 11 zones: Kitchen door (E/E) Front Door (E/E) Workshop PIR Garage PIR Lounge (Pet Friendly PIR) Hallway 1 (Inhibited Pet Friendly PIR for E/E) Hallway 2 (Pet Friendly PIR) Bedroom 1 (Pet Friendly PIR) Bedroom 2 (Pet Friendly PIR) Dining room (Pet Friendly PIR) Kitchen (Inhibited Pet Friendly PIR for E/E) 1 x RKP External Sounder Is there a system/ kit that will do this (Honeywell Galant? - is this panel obsolete?) or can I link multiple PIR's to use the 8 zone kit as advertised Honeywell ADE LCD Accenta 4 x Pet PIR Starter Kit

Hallo, As a potential customer(self employed) from Germany I`m interested in one of your intruder kits Visonic Powermax+. I would like to know if for the time beeing offered kits are working in the 868 Mhz frequency band and have phone (dig/analog ?) interface. Also if 1 (one) piece of a 868 Mhz Powermax+ kit can be delivered to Germany (paying by PayPal). They are respectevely specified with a weight of 0,2 or 6 Kg; how much would cost dispatching+delivery to Germany for each.

is it possibe to part set a system, silently, using a Honeywell easy set with key fob. If not , how is this acheived. I want to set/ unset the ground floor from the first floor, in the quickest and quietest way.

Hi I have an accenta mini g4 hard wired 4 PIR and exit door magnet my panel shows unset when I enter my code zones 1 6 7 8 light up and I have to omit these zones and press the tick to set the alarm which means the entry/exit is omitted I do not have any tamper wires connected to the PIR or door or the panel the only tampers that operate are the bell box and panel cover. the alarm works fine when the zones are omitted Can anyone tell me why zone 1 keeps lighting up and showing alarmed as this is the entry/exit please help!

Will you be stocking the C079-2 RF portal? The only portal listed is the old one.

We have a Visonic WR200 (418) receiver that in turn connects a hardwired alarm panel; this receiver is used to link another panel in a separate garage. We

Hi, Can you advise on a simple and robust wired alarm for a cold and damp Scout hut. I will be installing it myself but I don't expect major problems with that side of things... We need: 5 PIRS 1 key pad 3 door detectors 2 external bells (preferably) 1 dummy box 1 internal sounder and about 200m of cable No need for distinct key codes or anything like that. Thanks

ooking to buy a Secware Basic Full Kit Accenta, 2x PIR, 2x Contact, 1xSAB Need extra RKP and door contacts. Could you please advise which parts are the same as the kit

I can't find any Wired Siren for my Powermax Complete alarm. Do you have one, or could you recommend one?

I am looking for an addressable Intruder Alarm System. I have already passed a 2 core power cable and 4 core looping from each PIR. Can you please guide me to find the correct system? I also need to connect an access control system with the intruder alarm system. Will look forward to hear from you. Thanks and Kind Regards

Hi do you have a comms lead for the 9850 scantronic control panel 8 pin ? we have the 9800 12 pin version as shown on your site Many thanks