Intruder Alarms

Does the Texecom SPEECH DIALLER Text Alerts system send texts directly i.e. when the intruder has already cut all the BT lines & broadband etc, will it still work - does it have a SIM card?

The systems re-starts itself making impossible to use is as it fires the alarms every time the systems re-starts. The system installation was installed about 2 weeks ago and at the beginning, about every day, at any time (middle of the night or right in the afternoon) the systems alarm was on but with NO intruder detection as the system was NOT armed. Watching the log events, every time that it fails, shows “START UP” and “MAINS OK” and the LCD Keypad shows new date and time as when start up for first time (like default factory data). With this information, I understand that power is being lost for some reason so I changed the main power supply connections just to make …

Hi, I wish to intall a wireless alarm system that includes both an wireless external sounder/strobe and a wireless smoke detector. My question is which is the best, it is for a 3 bedroom house, I have had the Powermax plus before and never had any issues but there was never the choice that seems to be around now. I am basically after the most reliable system. Thanks Nick_P

I have a Gardtec 800 system with an 8 way zone expander unit. After a lightening storm the panel comes up with a fault: LEX1 tamper. I believe this is a line expander unit fault. You are selling a Gardtec 02083 Zone expander unit - is this the same as the line expander unit I have (label with EX MO1/11 EN50131-1 PD 6662 G3 EC2 PR5705 Rev 1.0 4390) I would appreciate your help.

Just installed accenta g4 with a keypad upstairs and one downstairs. When i power on the system i dont get any text on the display, just backlight nad the first line where text should be all dots are on. Both keypads are wired back to the panel. Has anybody seen this before?

I am only using 6 zones & no PA. I have programmed zones 1-6 as used and 7 & 8 as unused. When I try the Walk Test as soon as I input '0' for the test, zones 7&8 LEDs light up and an intermittent tone sounds. Any ideas??

Please advise if you can supply a replacement PowerMax Plus panel (433 MhZ) to Cyprus?

could you tell me if the system uses 12 volts as a battery backup ? i am looking to putting this system into 4 garages/lock ups where there s no mains power, but i could use 12v batterys if this system runs on 12v when no mains power avalable, also is it a 12v supply that activates the siren, thank you.

good day would like to know how many door contacts can i wire together each zone of the euro 46s panel.

I have recently purchased a Honeywell Accenta Gen 4 Alarm panel from you. I now find that I need backup battery for this panel. Can you please advise which one will fit and do you supply it.

Scantronic EXCELR 12m Wireless PIR will this work with my scantronic +500r panal please advise the frequency your help would be appreciated

can you tell me if the Flex 20 Mk7 can have a lan connection plugged directly in to the unit or do i need to go through a wall port connection? Thank you https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/security-control-panels-c-36_102/1124-input-zone-medium-c-36_102_103/honeywell-flex-20-grade-2-20-zones-metal-box-mk7-p-5337.html

Can you tell me if the Honeywell AC030 alarm button can be wired with just two wires? My current one which I need to replace only has two wires connected to it and the tamper function when removing the cover still works.

Hi, I'm going to replace my existing (faulty) Eurosec CPX alarm and I'm intending on purchasing the Texecom Premier Elite 24-W Kit from you: 1 x Premier Elite 24-W Complete Kit (GED-0013) 5 x Premier Elite Ricochet Impaq (GBB-0001) additional sensors for the windows (impact) and door (using the included magnetic contact) 1 x Premier Com2400 (CEC-0001) for communications I have a few questions though: Will the com2400 fit inside the control box supplied with the above kit? Which backup battery should I purchase for the control panel? Can I use my existing external sounder or should it be replaced with a new Texecom Odyssey Sounder (either wireless Ricochet…

I am looking at purchasing the Honeywell Galaxy Flex 20 UK Panel together with ESP Fireline smoke and heat detectors. Can these be used in conjunction with one another i.e. integrate the detector system into the alarm panel, setting it up as a fire zone? Or are the ESP Fireline detectors only suitable for a fire panel?

The transformer has failed in my old alarm. Looking at the Veritas Excel. Is this a straight swap? To the new alarm panels come with the battery or will i need to get one. Regards

I was wondering if the Powermax Pro kit you sell supports Partitions? As the description says its optional. Thanks

anyone have a user panel or eng for the europlex technologies verifier intruder panel, thanks

Hi what end station will i need to run two care tech euro one rkps with tags and can my order get here for the weekend if i order today jason

I need to replace a PIR on my 500r+ system. I've got 515r PIR's and notice you've got 520r PIR's "compatible with 500r+" so it looks like that's a reasonable replacement. Can you confirm that it would be a viable replacement, operates on the same frequency etc.

Can you please tell me if all these items are compatible thanks SECWARE 16 Ohm Internal Speaker Texecom Prestige Quad PIR SECWARE FUSEDSPUR SECWARE BACKBOX Texecom AFU-0004 Bracket for the Prestige Range Texecom VERITAS EXCEL C/W LCD RKP Texecom PSD001 SPEECH + TEXT DIALLER Enersys 12v 3.4 A/h Battery Unifix 4.5mm Round White Cable Clips Secware 6 core Intruder Alarm Cable Texecom IMPAQPlus With Built in Contact Texecom ODYSSEY 3E LIVE BACK PLATE GRADE3 Texecom ODYSSEY 3 COVER WHITE Secware Bellbox Label / Sticker

Hi there, I'm trying to source the components for an alarm kit for a building which is divided into two with two separate doors, but ideally one common alarm system. I have worked out that I need - Bellbox (external) - Keypad x2 (RFID/Tag or similar would be great!) - PIR x 3 - Control Box with backup battery - Door contact x 3 - Cable & Clips Would you be able to advise in which products you think would be most suitable?

I am unable to enrol the KP-141 PG2(June2013) to the Power Master 30 alarm system(Nov2012): - Full enrolment procedure: I select the * key on the keypad until the LED turns on and then release the * key. The Power Master 30 alarm system (i.e. Add New Device -> Enrol Now) indicates on its display, "Incompatible Device". - Pre-enrolment procedure: I enter the Id of the device into the Power Master 30 alarm system and it is accepted (i.e. Add New Device -> Enter Id). However, the Power Master 30 alarm system indicates that the keypad cannot be networked.

I need to replace the battery in my Scantronic 9651, but can't find this on your website. Please advise the name of the battery.

Will these Optex Battery Powered 4 Channel Synchro Twin 30m Active Beam work with The new Visonic powermaster GTX kit https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/active-beams-c-36_142/optex-battery-powered-4-channel-synchro-twin-30m-active-beam-p-3371.html