Intruder Alarms

Please help are the Bosh BLP1-P Pet friendly PIR Sensors compatable with the Honeywell Accenta Mini Gen 4 Intruder Panel & LED Keypad Plus FlashGuard Bell box?

Hi, I have just bought from you the Honeywell galaxy g2-12 and mk7 keypad, Honeywell 8IR150 pirs and AG6 bell box, plus Knight G2 5 door contacts. Can you please advise how to wire a pir at the pir end and panel end and where to place resistors. The g2-12 to keypad appears straightforward but does it need a resistor at the keypad end between A and B. Also do all unused zones need a resistor across them to terminate. Could you also confirm bellbox wiring to panel.

hi, I am looking at the "Takex 20m Ext/40m Int 4 Channel Twin beams inc Pole Clamps" for use on scaffolding and was looking for some advice on suitable keypads and sounders to go along with it looking to buy a whole alarm set pretty ASAP to try with the intention of buying more and any advice would be greatly appreciated.

I am replacing old ones of these. On the existing Optex EX-35R units is a sticker 869Mhz When I get these new ones, howh do I 'pair' it to the existing old Tunstall control unit, or how do I set the frequency to 869Mhz? Cheers in advance.

Can a DIYER change a wired room sensor (blue sensor light constantly going on with no motion detected ) it a Castle Euro mini . If so can you please give relevant information as cannot find it in the user manual RIN S 1209-5 or programming RINS1210-6 to get rid of sensor removal tamper alarm

anybody help as to why the is no 13v supply from the circuit board which means no supply to the pirs or door sensors. this is a new installation. all fuses checked ok but no back light to key pad either. I can put panel into engineering mode and day mode but that is all. All wiring has been removed and any links refitted but still nothing from the 13v. hope someone can help!

I live in France, and I have several questions about the kit Visonic Powermax Wireless Sounder Quickfit Kit: \\\" Visonic Powermax Quickfit Kit (inc Wireless Sounder):

Can someone please help Im trying to connect the AG6 external sounder to the ADE Gen 4 but on the connections manual that come with the sounder there is no ade gen4. I have connected it how I think it should go but i keep getting a tamper fault up ?? Thanks

When I wire the panel to activate output 1 when a fire alarm is triggered it doesn't seem to work when I activate a fire alarm from a remote keypad. Is the RKP fire alarm different then from a smoke detector?

Can anyone tell me how to stop the LED flashing (it is bothering me in the night) on a viper GLX? i have had the top off and i can see dip switches, also it only has a 4 wire connection? a 12v supply and the alarm wires.

Can you confirm the version no of the Wintex software

Can you advise which security panel would be suitable to replace one which has failed? (only lasted 15 years, but sadly now defunct!) This unit has 6 zones (hard-wired) of which I use 4. Anything that offers similar, at least 4 hard-wired + radio to cover areas not currently covered would do. Can you suggest something? I can install it.

diy er order no#6419. have system installed and seems ok but not fully tested yet! in the absence of the installation manual could you help with some zone terminology. monitor, Ln fault and fault....then normal ky, bias ky, remove+ and remove-. I wish to have it set up for just "normal" pir detection. nearly there thanks...

Hello! I have recently purchased the above alarm panel kit from you as part of an intruder alarm system, which i put together using your website and purchased on the 3rd March 2010. I have received a user manual however I also require the engineers/installation manual. As the payment has cleared am I able to download this manual from your website and if so can you advise me how? I am keen to install the system as soon as possible so if you could get back to me as soon as you can it would be much appreciated. Regards! Cspudfire.[/color]

I have a domestic Itec Horizon alarm system with shock sensors wired on every window and door sensors on the front and back door. The systen does not use PIR's. The main Horizon box has developed a fault and I understand these are quite old now and no longer available. Can you tell me what a modern equivalent system is that would be compatible with the existing installation - ie the window and door sensors and the price?

Please help are the Bosh BLP1-P Pet friendly PIR Sensors compatable with the Honeywell Accenta Mini Gen 4 Intruder Panel & LED Keypad Plus FlashGuard Bell box?

Hi i wanted to know if this system will work with Honeywell accenta/optima security panel?? also will it connect directly to telephone line?? Also can it deactivate alarm through the phone??

Just got a question I can't seem to figure out. How do you program Part arms on the Wintex software? I would like to activate a Night arm or Bedtime arm.

Dear. I try to install KP-250 PG2 to my Powermaster 30. But the cetral unit only say: "Wrong ID". What shall I do?

Hi, I have bought these Quest Pirs and they do not seem to pick up well enough. has anyone had the same problem? Rav

hi brought honeywell informa a while ago along with accenta g4 package. the problem is i can get the infroma to ring out in engineers mode but when the alarm is activated (set off) to see if it rings out it doesn't. the only time it works is when there is no power to the alarm mains or battery. i have connected the dialer to it dedicated connection and also to the +/- and the bell - but either way it still doesn't work. any ideas.

I've been looking on your website and I've seen 2 products I'm interested in: ADE Honeywell Accenta Mini Gen4 with LCD Keypad. One has a product number of: 8SP400A @

hi i have installed a castle care alarm with digi-modem1200 and i was wanting it to send a text message when the alarm goes off.i have put sms message in format in program digi/sms settings but it does not send text message when alarm is activated.the mobile numbers are correct in settings. thanks

Could you advise please, I need a replacement vibration sensor to replace a Shockgard sensor, it looks like the 2t. It has 12 v supply and latch control and works on a Rascal Panel Are these still available or is there another unit that would act as a replacement

I would like to purchase a Visonic Powerlink3 for my Powermaster10 system. Can you confirm I can use it to directly access my alarm panel remotely, rather than needing to use a Power Manage system please? I am hoping I will be able to access my panel by using the IP Address of the system.