Intruder Alarms

Optex 20m External Twin Beam https://www.securitywarehouse.co.uk/catalog/cctv-equipment-c-1/detection-c-1_24/optex-20m-external-twin-beam-p-84.html Hi there, I am looking to have this type of system used in my house. To cover all usual access’s. Could you advise what infrared systems would be best and what control panel to streamline them with?

Hi, i am wondering if anyone could tell me what the bell terminals are on the euro 12 board and also could i use a euro mini keypad on this system ? thanks liam

Hi, do you have any ACE transmitter keyfobs for the Gardtec 593? I would need 2. Many thanks in advance.

I have two garage doors, roller shutter style on my house in need of connection to the Visonic powermax complete system installed. Is it possible to use the "MCT-100" connected to a couple of "Knight Plastics F10C Roller Shutter" or do you have some other recommended solution for garage door protection?

Please can somebody tell me if the Honeywell SEF8M will work with a Flex 20 panel and RF Portal (A073-00-01) Thank you

do you know how many Texecom Impaq SCcan be connected to one zone on an alarm panel

Hi, How do I connect my I on 40 security system to the internet?

I want to use the PGM output to connect another device (trigger an event). The requirement for this is that the PGM has a binary digital output (On/Off). Does it? And how do I use this?

i ordered a Texecom alarm R8+ in 2010. I setup the alarm last year. i got some PIR petwise frmo texecom. Well, i have false alarm during the night 1x / each month in the room where there is a sofa. I have 4 cats. I guess, they jump from the sofa. Do you know a trick to decrease the sensitivity ? or there is another solution / PIR to avoid those alarms to buy ?

I am after a bit of help. I am looking for a wireless alarm recommendation. I normally fit a mixture of texecom and Honeywell hard wired system, but looking for a wireless system. Just a few requirements : Decent looking keypad. Bell box with illuminated back light Ability to send activation via internet. Thanks Ryan

I have a few G3 Keypads as they are now Obolete can you upgrade with a latter model or do you have to change the pannel also?

HI I just installed a Risco WisDom panel and was wondering how to wire a Gardtec eusosec xs7 Bellbox to it. A wiring diagram would be very helpful if anyone can help. The panel comes with 2.2k resistors , the lid tamper is fine but the bell loop fault keeps coming up, and the alarm activating does not ring the external bell. Thanks

Hi 1. What PIR detectors are included in the Risco Wireless Wisdom Kit? RWT92? 2. Informative stickers (informning the possible burglar of the alarm), are such included or can they be bought separately? 3. Could you give me some advice regarding Risco's Wisdom and the Powermax+? Those are the recommended/approved wireless alams in Sweden but there seems to be quite a difference regarding the price (3PIR, external siren, central unit, 2 keyfob)? Best regards, Jonas

I am trying to get hold of a morley key fob for working electric gates and access doors in our apartment block. The reader is a Morley TM4 Series. Please can you let me know if you have these in stock or alternatively another key fob that is compatable with the reader. We need 6 key fobs. Thank you

In urgent need of a Eurosec CPX, Radio/wireless Receiver, & Radio/Wireless PIR for waiting customer,and I am not sure how long they maybe willing to wait/believe that there is a supply problem. Please advise regarding more information or suggest suitable replacement equipment (another manufacturer) that can provide all the respective functions of Eurosec CPX, or Gardtec 595.

Hi I am looking into buying a Visonic home alarm system Is it possible to mount a curtain detector across a room, i.e. creating a wall (a foot inside of a number of windows), even though there might be chairs etc on the floor?

HiI have been asked to install/add 2 Texecom AEB-0001 Impaq Plus Shock Sensor to a Scantronic 9448 alarm panel. (18 months old)There are 4 spare zones so that is not a problem, my question is will the 9448 panel support these type of Shock Sensors or could anyone recommend a more suited Shock Sensor?I will be glad to hear if any one thinks the panel is not suitableThankyouRichard

Please can any one give any infomation on how you wire these Texecom IMPAQe shock sensors. :-\

I am tring to select an alarm with the following requirements: Up to 8 zones LCD keypads (1) Proximity tag capability (prefer it built into the keypad) Easy to use Autodialler capability preferred but not essential (can add standalone autodialler) Reasonable cost The panel will be in an obscure location which wont be accessed regulary (no need for buttons) so will be controlled/programmed by remote keypad/fob Please advise which items would be suitable

Hi I need to purchase a wireless alarm system with proximity entry I have looked at the powermaster visonic range but need to know if the powermaster 10 panel has an internal 12 v supply outlet so I can add my already owned gsm dialer.I have seen that there are two proximity readers in the powermaster range the kp 160 and the kp 141 which is the most suitable and easiset to use and are the proximity tags an extra with these items

I have a system that is activating as soon as the full system set is applied and timed to set. It sets ok in part, however there are no open zones to activated the system. Tamper circuit is also fine. Any help is appericated.

I am torn between the Pyronix 46 App, the HKC 1070 and the Texecom Premier systems. I want a hybrid system where I can have mostly wired sensors and outputs but with the potential for a bit of wireless. I'm comfortable with programming reasonably complex panels having done Texecom and Honeywell systems for my families houses. I've read a lot of great things about HKC on a Internet forum but I see you cannot connect the app to the panel without authorisation. Is this true? Can you provide this service?

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/remote-signalling-c-36_57/eaton-scantronic-adapter-board-p-6480.html ------------------------------------------------------ I have an older i-ON40 Scantronics alarm (Cooper Security Limited) which I would like to reconfigure to enable remote access. However I haven't found any online information that can confirm if this older model is compatible with the remote App. It is currently running firmware version 4.04.17. Is the current firmware compatible with any remote Apps that are available? If not is it possible to upgrade the firmware? Which WIFI module would be required? COM-DATA-WIFI or COM-DATA-4…

I am looking for motion sensors that sit on my window cill that points out of window and can detect a person outside but only up to a few meters. I would like a buzzer that goes off but not a loud siren. I dont have Wifi for security risks as everything is multiple VLANs via ethernet cables. Can you please recommend what would be suitable to achieve this, Thank you

Dear Support, Would you know the jumper settings for a Risco Gardtec 595 / 800 Series Zone Expander card? There is a bank of 8 called ZEX1 through to ZEX8, J9 (ZEX Type) and J10 (ZEX Group). Are these in a manual somewhere as I can't find them in the 595 manual I have. Grateful if you can help.. Many thanks. Roy.