Security Lighting

I am looking at controlling 2 outdoor PIRs and lighting as 2 seperate zones. I notice that you have the emerald unit and the Voltek unit. I have the following questions: 1. will the units work with any manufacturer of PIR (12v) and lighting? 2. Do you stock the 'GJD base 2' which is required for the emerald unit? I notice you stock 4 zone expansion unit (GJD040). 3. Can you tell me what I would require for the Voltek 2 Zone systemas well as the TZX command centre? 4. do you have a general schematic for a 2 zone simple system? Thanks in advance.

Beam to activate security lighting 10-12m max and what else would be required

I’ve purchase some exterior lights auraglow exterior wall , my brother also purchase a zone module and pir sensors from you , but I’m not sure if these lights will be compatible, also I’ve got 4 lights at front 2 in alley way , how many pir sensor would I need and also are they all easy to set up GJD Equipment: 1 x GJD DygiZone Digital 4 Zone Lighting Controller & Enunciator 8 x GJD Mini Opal External PIR (Black)

My old security light control box (Racal Guardall RLC1) has packed up after many years of use. It appears this Company no longer exists so I contacted Security Warehouse for advice. They told me that if it is a single zone system (I have 6 lights and four PIRs outside) I will need a GJD005 Sapphire Mk3 control box. I duly bought one. However, when I eventually got an electrician to call he told me the wiring wasn't compatible as the old control box only had one output feed and the new one has more. As I know next to nothing about this issue, is there anyone who can give me advice and if so, in simple terms please?

Hi. I'm looking to buy the Genie IR lights on an ongoing basis for various projects as they come up for us (eg product no. 13/24. I will often be looking to run them off a 12V DC supply. Can you recommend the appropriate power adaptor please?

compatable detector and flood light to go with lighting controller emerald mk3 2zone

Hi there, I am looking for a solution if possible for when my customers intruder alarm activates for it to be able to switch on external floodlights? Is this possible with your single control zone unit ie 1803 range or similar. It will be attached to a Texecom Veritas Excel Intruder panel , possibly connected to the bell -ve trigger.

Can you please tell me which one of these two products, GJD Mini Opal External PIR or Opal XL 12V PIR 35 m works with an older version of a GJD controller - it has a 6 wire configuration. The old ones - have disintegrated lenses due to UV light - they have GJD on the inside of the housings and they have a pan-tilt PIR but no model number if this helps. I've looked on your site regarding the new types of controllers which are very similar to the type that have been installed. Once I know if either are compatible I will need to order.

i have a 2 zone touch control 12v 120ma power supply unit with the code gjd exp mk4 printed on the board, it is only putting out 4/5 volts do you have these in stock. thanks Carl

Hi, I have a Honeywell Galaxy G2-20. I need to use a relay to connect an output to a GJD lighting system 15:32 Would the TKC relays be best for this or would you recommend a different relay?

Hi I just bought the above unit....do I need another piece of equipment to operate this unit as I was under the impression that this unit had a light incorporated and was an all in one unit....is it just a sensor and do I need to fit another piece of equipment, if so what??

I have a number of lighting sensors on our house and one of them seems to have stopped working (they've been in place since '99). Do I need to replace the whole sensor or just the bit inside?

I currently have a GJD 2 Zone Solitaire one of the zones the light keeps getting stuck on once activated and does not turn off unless manually turned off at the panel. It has been suggested I may need to replace the zone controller, would the dygizone be a straight swap for the solitaire as I cannot find that model anywhere .

I have a Racalite Light control system running 4 external lights via 4 sensor heads. The sensor heads are the type supplied with a Guardall Excalibur system. I am looking to obtain 2 replacement sensors capable of operating on the current system. Specification of current sensor heads is: Power: 10-16v dc Temp range: -20 to +55C Steering Adj: +/-90deg horizontal +10 to -50deg vertical IP rating: IP55 Detection range: 17m 100deg field of view. Can you supply 2 suitable sensor heads? If so how much?

RE: Takex PR-11B Hi, I plan on purchasing one of these devices as part of a home automation project to detect when a car drives on to my driveway. I was planning on attached the dry contacts to a binary Z-Wave detector to initiate some other lighting. I was wondering what the best source of power for the sensor would be - are you able to recommend any low cost power supplies? Thanks,

We have recently moved into a new house, and ive been trying to work out why the front security lights are not working. it looks like we have a voltek system as in the pics below the proximity alarm beep works ok its just the lights don't come on, and yes we have changed the bulbs thanks marc

One of your Opal XL products was installed yesterday as a replacement . The new product switched on automatically in response to movement after dark but the lights remained on and would not then switch off automatically. 1 Is there a control device on the unit for managing the time that the lights are activated or can you suggest another solution please. 2 Do you have an installation schematic for the product ?

Hi, I have a GJD emerald mk3 system with 3 sensors and 3 lights and I hope somebody can tell me why the lights are coming on in daylight. Nothing has been changed on the system and for about the last 3 months they have been plying about!!! The system is quite a few years old now and I was wondering if the opal sensors or the main panel should be replaced. Thanks Steve

Hi I bought a system from you last month and have now installed it. I bought a GJD digizone controller, 4 way expansion unit and Mini Opal pir's. The system often works well but every now and then a red led flashes inside the pir's and the system dies. It sometimes dies for minutes or hours then seems to reset and come back on. Do you have any idea what causes this?

Have just installed a 4 zone controller, DygiZone (GJD910) and expansion panel (GJD040) with 7 Mini Opal external PIRs (GJD 332). During the installation and initial setting of the PIR’s I had to remove each cover several times. Some of the PIR’s retained their Hex retaining screw with a plastic washer but quite a few them fell out. Inevitably with such a small screw I managed to lose 2 of them. Is it possible to get hold of replacement screws and washers through security warehouse? If not do you have the specification? I could do with at least 6. I have also recorded a voice message for each lighting zone but the quality of the recording isn’t very good. Sounds like …

I have a security light with chime alarm.My plug in alarm has stopped working.It looks looks identical to your model TLRXC1. My alarm has the type No BQ-RF-PTC-RX-W, 433MHz stamped on the back. I wish to buy a replacement alarm, my question is, will your model TLRXC1 work as a replacement alarm?.

CAN THIS BE USED OUSIDE TO CONTROL TWO OUTSIDE LIGHTS?

Having a problem with the new units : Initially both TX units were recognized by the RX unit and worked correctly but after about 15 minutes one of the TX units ceased to be recognized (the PIR is working since the LED flashes on the TX unit but the RX unit is not responding). Have disconnected and reconnected power to both TX and RX unit and used RX program mode to attempt to re-detect TX unit but still no response. Is there any other "reset" procedure or is the TX unit faulty?

My problem concerns our home security lighting system. We have two floodlights, two PIR's and an internal control panel. The control panel inside says GJD Sapphire MkIII. After several years of faultless use it has now gone wrong. Sometimes the lights only flash, sometimes they are ok. I think it is either one of the two PIR's giving a faulty signal (with the other still ok hence it sometimes works) or the timer in the control panel. I tried altering the time on this and they seem to stay on longer when they do work, but usually they only flash. Should I change one of the PIR's or what. I really would like to talk to a real person!

could you please advise on a psu unit to power 3 optex vx402 units and 12 volt to 240 volt trip relays to power 4 500w flood lights on a barn inc 1.2 amp 12 volt backup.