CCTV

I have a Mitsubishi DX-TL HDD recorder, and i am looking for some replacement monitors as my current screens are getting a bit dark. The Mitsubishi has BNC connectors with 1.0Vp-p and 75 ohm output. The Secware 17" TFT monitor has a BNC connection but doesn't state the voltage or resistance, can someone confirm that the monitor would be compatible with my recorder. Thanks.

I know that Pelco unit is now obsolete but unfortunately we have to find somewhere some stocks of these because these units are intended to be used within a CCTV system already based on this type of equipment. We are talking about a system (for Bucharest subway) that has about 1000 video cameras and 90 multiplexers and is very difficult to put few new units with other operating procedures.

Hi, I am looking for a reliable replacement for an SEC-TFT-19 CCTV Monitor for my security camera home system. It is 12v , colour and has been quite reliable but recently packed up. Would you recommend this 19" TFT model as a direct replacement and does it come with a transformer. SecWare 19 TFT Square Screen Monitor [GT19TFT] - £124.00 : | Best Price Promise | Security Warehouse Professional products Many thanks

I want to replace a PTZ with 2 IP cameras and send their video down a single coax? I am using NVT FLEX Switches that provide POE but I don't want to run an additional cable unless I have to? Sorry CLEER switches which are Ethernet over coax.

I have a question regarding the DUO-LINK II. What voltage supply should I be reading at the DC LINK OUT port on the viewer unit? I have got 48v DC IN present at the IN terminals on the Viewer.

Do you have any cameras that work on a CnM system I think the cameras work on vga .

Hi everyone, I’ve been working on people counting solutions that work with most standard IP/CCTV cameras, especially for retail stores, malls, and public venues. It’s been really interesting to see how different camera placements, resolutions, and lighting conditions affect accuracy. I’ve found that keeping the camera high and angled downwards usually gives the most reliable counts, and anonymizing the footage is a must for privacy compliance. I’d love to hear how others here handle similar analytics projects. Have any of you worked on footfall or people counting setups before? Any tips or pitfalls to share? Thanks!

Hi I am interested in using the Honeywell HD73X on the outside wall of a building, is there a special mounting bracket for it and if so how much.

I'm looking to buy a capture card for 16 coaxial cameras and would like some advice on this.

please advise me of the differences between an Optex AX 70-TN and a Optex SL 200QDP. The proposed location is no more than 20 metres. Does the more expensive unit have a technical advantage?

Im looking for an 8 or more channel DVR which will produce the best viewing on a 32"LCD screen. The cameras are 540TVL. The DVR i currently have is producing poor images on the TV. What do you recommend?

Could you please advise whether you have in stock or could obtain a battery for a Computar Monitor model PSM012 and a price for delivery to Republic of Ireland. If you are unable perhaps you know of someone who can? When we tried to order the item online, the order form is set up such that we were unable to select the country of despatch, as only UK counties were available.

Lastly i purchased some cameras from you a couple of months ago. 2 of the cameras out of the 6 look bad at night time a foogy image. I cant see anything which is reflecting back on the LED's. Its the 2 cameras at the back of a house looking at a garden which it 30m2. I can send you a picture if helps.

Currently wired a new build for CCTV using CAT6 to each of the 6 camera positions. Please can you advise on most suitable and best value 8ch DVR and cameras that you have available.

I need some very cheap small door CCTV camera set at home because my kids open the door always if new people came

hello, i purchased one of these dvrs a couple of years ago but now am i need of the remote control as shown in the documentation, can i purchase this from you, if not are you able to advise me where i can find it, thanks, Dario

Could you suggest what I would need to connect a 30 foot cat6A cable running from a DVR downstairs to the loft space upstairs. I'm considering 4 channel baluns? passive or active I understand the active needs power are there any other reasons to pick one against the other. On my cat6a cable it reads LSZH-CO1-003-003-09-038 (2014/32) 146200

Hello, I arrived on your site trought zomeminder site. I need to buy one capture card PCI-E with 16 analog input camera. Have you got? How much is it? it will be installed in a fedora 14 server with zoneminder sotware to use it as security in a house with already 16 analog camera with BNC plugs.

Aspect L-TU-IP4M-Z-1 IP Camera Do you know default password? Will the camera stream in ONVIF mode, what decoding formats?

I'm requiring a CCTV system involving 2 cameras, a recording device and means of viewing recordings. It will be indoor; sometimes in low light situations. The coverage must be legally enforceable.

hope you could advise a product for our requirements. We maintain the electrical installations for a poultry farmer in Devon, he would like to install a CCTV security system. He would like a camera positioned on each of the 6 buildings - looking for a high quality image day and night. From a central monitoring point the sheds are arranged on a radius of 200m (furthest shed - most sheds within 50m), hard wiring the cameras would be impractical. Do you have a wireless system that would be suitable.

I have an Apollo 8ch HD series DVR with what I presume are analogue cameras, using balons with dome cameras and a 12v feed via the same cat6 cable. Will the newer HD dome cameras work with this set up?

Hi, i was looking for make a security system with ipcams and zoneallarm as software! But i have a question: if i use ipcameras i must have also a captured cam or i dont need it? I was looking to buy this camera Axis 207 IP Network Camera! And add all that to my mythbuntu system! Thanks for your help

looking to send 3 images down 1 coax , similiar to Duolink , do you have anything?

I inherited a analogue 8 camera system, that is a couple of years old, and mostly functioning. Id like to upgrade 3 of the cameras, the DVR and all the paired PIRs. Is there a DVR that can manage old and new cameras and the paired PIRs? I'd like to get a alerts from the PIRs, then look at the live camera if needed. To keep false alarms to a minumum I am thinking about GJD or Optex VXS PIRs. Is this a good approach, or should I upgrade to the a POE IP NVR set up?