secware3

Would this battery below be a suitable replacement for a Texecom 12V 2.4AH BATTERY for an accent 8 mini alarm system? Secware 12v 2.3a/h Battery [MKES3-12SA] - £8.09 : | Best Price Promise | Security Warehouse Professional products

Can you kindly confirm that the Bosch Blue Line Gen2 Passive-infrared Detector, that you sell, would be fully compatible with my 9651PD-41 Grade 2 8 zone Panel that I purchases from you a few years ago?

Hi Im looking to connect a module to an intruder alarm to send a signal to a panel when the alarm goes off. Is this possible with something like the Flex trigger module?

Thank you for your enquiry. If this is the Impaq SC, then only the contact side (MAG)of the device will work as normally closed. The shock side (EOL) must us resistance. I hope this helps.

, I have an older alarm panel that does not need EOL resistors. Is there a way to use this device without the EOL resistors selected as a normally closed circuit like traditional alarm circuits? Before I had the texecom AED 0001 which is fine but this new replacement talks about EOL resistors built in in the literature. I just want to know if it is compatible with the texecom veritas panel which doesn't use EOL

Hi how do you change the code on these alarms if you don't remember the present code?

Generically, an example of a set up would be:- On activation, a wired input on the 703R transmitter could signal wirelessly to a 762R receiver. The 762R receiver’s relay output(s) could then trigger and activate a panel zone, LED box , sounder etc. Eaton 2-Channel Narrow Band Wireless Receiver [762REUR-00] - £127.94 : | Best Price Promise | Security Warehouse Professional products

Hi, I'm an installer looking for a 6 zone wired panel with option to expand using app, What do you suggest?

Looking at Eaton 703R with Receiver and way to alert when received

Hi, Just purchased the ACT1313 PLUS Spike suppressor. Could you advise if just the RED/BLACK/EARTH wires only need to be connected or do you also need to connect extra wires from the terminal blocks to an offending circuit. Basically not sure what the terminal block is for? As you have probably gathered I am DIYer not an alarm specialist. Any advise would be grateful

Answers below regarding an i-on40 V4.04.17: Is the current firmware compatible with any remote Apps that are available? No . The panel does not support App control. If not is it possible to upgrade the firmware? No . The panel is obsolete and does not support app control, regardless of software version. Which WIFI module would be required? COM-DATA-WIFI or COM-DATA-4G-SD (It has the older style accessory mount so would also need the adapter module (COM-ADPT-02)) The panel does not support either the COM-DATA-WIFI or COM-DATA-4G-SD If there are no compatible Apps, would COM-DATA-WIFI work with my system - this would at least allow me to access the system via its onboard webserver. The panel does not support the COM-DATA-WIFI. An upgraded panel would be required. The closest match is an i-on40H+ . This has app control and can support the COM-DATA-WIFI and COM-DATA-4G-SD plug on units. Eaton 40 Zone Hybrid Panel with KEY-KPZ Keypad [I-ON40H-KPZ] - £247.94 : | Best Price Promise | Security Warehouse Professional products Kind Regards, Security Warehouse Support

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/remote-signalling-c-36_57/eaton-scantronic-adapter-board-p-6480.html ------------------------------------------------------ I have an older i-ON40 Scantronics alarm (Cooper Security Limited) which I would like to reconfigure to enable remote access. However I haven't found any online information that can confirm if this older model is compatible with the remote App. It is currently running firmware version 4.04.17. Is the current firmware compatible with any remote Apps that are available? If not is it possible to upgrade the firmware? Which WIFI module would be required? COM-DATA-WIFI or COM-DATA-4G-SD (It has the older style accessory mount so would also need the adapter module (COM-ADPT-02)) If there are no compatible Apps, would COM-DATA-WIFI work with my system - this would at least allow me to access the system via its onboard webserver. Many thanks

Product Name: HKC Miniature wireless magnetic contact with shock - Brown https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/wireless-ia-c-36_60/hkc-miniature-wireless-magnetic-contact-with-shock-brown-p-5971.html ------------------------------------------------------ Can I change battery on this unit myself. Rf mcsb . I do all my own DIY. I only want to know how to change the battery on theses contacts as engineer is always busy . I understand that any more serious issues with alarm needs an engineer to fix . Can you help.

Hi, I am looking for a detector to cover an extension with lots of glass in. A dual tech sensor with k band has been recommended. Is this detector a good choice please?

Can this Texecom Speech Dialler work with an Aico fire alarm system, if connected by the Aico Ei428 relay, (which has a switch triggered if the alarm is raised by the Aico sensors fixed around the house)? 2. Can you recommend a UK monitoring service which offers to take messages from this product and act on them? Texecom Speech Dialler [CGA-0001] - £135.06 : | Best Price Promise | Security Warehouse Professional products

Hi, I am working on refurbishing a building to become a small commercial gym in Crieff, Perthshire. I want to install a fire detection system, I’d need two break glass manual panels and then a number of automatic detectors with sounders. The ability to have an alert sent to my phone as well would be advantageous. Is this something you can help me to specify and also is it something my electrician can wire in?

Can I use the 16way 20amp power supply unit for strip LED lighting which we are fitting in our church auditorium?

I currently have a Visonic MCR-304 receiver used with a MCT-320 Magnetic Contact Transmitter on a door. The MCR-304 has developed a fault and I believe this item is no longer available. I was looking at the Pyronix UR2-WE as a possible replacement. I appreciate I will need to replace the magnetic contact transmitter; is there a compatible device and will the Pyronix UR2-WE be suitable. The MCR-304 is connected to a Texecom Premier Elite 24 and uses the 12 volt from the alarm. Many thanks

Just moved into house with ESP Enterview 5 and bell only sounds on the outside unit, no ring internally, so very hard to hear. Is that normal? Alternatively if I want to replace it with a newer ESP model using installed PSU what would you recommend and would the new one sound inside or do they need plugin or wired extenders?

Eneo 4.0mm 520TVL External High res Day night camera c/w IR Leds https://www.securitywarehouse.co.uk/catalog/cctv-c-1/cameras-c-1_2/infra-red-cameras-c-1_2_86/eneo-40mm-520tvl-external-high-res-day-night-camera-cw-ir-leds-p-1955.html --------------------- Hi, what connector does this come with please? I have an old Samsung SDE3170 system and the wires are plastered into a duct in the wall. So I am trying to upgrade my cameras without having the pull all the wires out. The camera connects to long wires with a 6 pin connector and then on the other end to the DVR with a bayonet I think its called a BNC. If this won't connect maybe you can suggest something that will. I need 4 and happy to buy a new dvf box too if it means i can reuse my wires. Thanks

Can a DIYER change a wired room sensor (blue sensor light constantly going on with no motion detected ) it a Castle Euro mini . If so can you please give relevant information as cannot find it in the user manual RIN S 1209-5 or programming RINS1210-6 to get rid of sensor removal tamper alarm

Hi, I was looking to purchase 8x Menvier SD3 Speech Dialler. I can see this is now obsolete and the replacement is Eaton Universal 4G speech dialler. Our design is based around a PSTN version and we utilise our own PABX system so the BT PSTN switchoff will not be a problem for us. Do you have an alternative that supports a telephone line connection? Regards, Rubel

Hi. Do you have wireless window vibration sensors in brown that work with Galaxy wireless alarm system?

Will the SECWARE D20 Surface Contact work with an old Accenta Intruder Alarm?

Hi, Thank you for your enquiry, The new DELTA/MOD-WE will be compatible with the V10 Enforcer panel. Pyronix Deltabell WE Module [FPDELTAMOD-WE] - £76.99 : | Best Price Promise | Security Warehouse Professional products Kind Regards, Security Warehouse Technical Support