admin
-
Posts
11 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Posts posted by admin
-
-
There are no seperate communicator outputs, these are only on the bigger panels, but yes you can trigger it from the bell output
-
Which unit do you have. The green code if an elmdene unit is not related to the wiring. The leaflet will detail which wires need to be connected to the panel
-
fault finding wise, id remove all wiring and connect the keypad to the panel on a short wire. then if that functions narrow down the fault. If it doesnt function then it may be keypad or panel
-
-
The master visonic equipment is 2 way but bear in mind all battery life claims are 'best case' like mpg in cars.
the visonic equipment is not as flexible as say the siemens. Plus the siemens etc has smartphone support, currently has x10 but this will change for a much better ha protocol in the future.
as this seems like a diy project id probably advise the visonic. Its nowhere near as powerful as the hkc siemens etc but the hkc is restricted to professional installers only.
-
Combined Vibration and door contact
http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=937
Contacts
http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=667
http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=3567
-
mark
Id say you have 2 equipment choices on your spec
HKC kit will do most of what you want but will be limited on the home automation side. id recommend the siemens product to do all you need and a future firmware update will give 2 way home automation comms, better than x10
-
Dear Rodak,
As you are aware your ticket is currently with Visonic technical to confirm the issue with your panel if indeed faulty or incorrectly installed.
We are awaiting confirmation from Visonic before we are able to offer a replacment, and we will update this ticket accordingly, as soon as we can.
As an installer you will be aware that you can contact Visonic technical directly if you feel you will get a quicker response that way.
Id agree, this is our issue to provide support. What is the issue you have?
-
As a voice dialler yes, however I'm unsure if the French system supports TAP or you have TAP receivers for sms over landline.
if you just need voice take a look at the Honeywell unit.
-
Yes you can connect both to port 1 and 2
-
Unfortunately we don't support that controller so it may. But if the unit accepts voltage input then it should
-
Just move the jumper to position 2
-
You need to connect a 16 ohm speaker to the panel speaker terminals and locate your speaker as desired
-
Yes you need to address additional keypads differently, each keypad needs to be unique
-
im assuming you have a panel with built in analyser?
-
you could use a visonic stand alone reciever and connect the relay to the push button, but this will probably involve modifying the switch as id doubt it has external connections, then you can program a fob transmitter into the reciever
-
is this an additional keypad, do you have an existing keypad that functions?
-
I am looking at your product MCR-308 + RL8 on-line and just wanted to confirm the the item includes the relay module (RL8). I want to use the item to add wireless zones to an existing Scantronic 9651 system, could you confirm that this is suitable?
sales will have to confirm the rl8 bit, but yes the relay board provides 8 x dry contacts for wiring into a panel, however id recommend changing the panel to one that nativly supports wireless
-
the secware unit is our own brand, the other unit is a branded unit. We test all secware own brand items to ensure they function well.
to capture reg plates the cameras need to be fairly square to the target, and zoomed to view about 2 car widths.
It also depends on your dvr.
the following sizes apply to dvrs
CIF = 360 x 288 pixels which is 0.1 mega pixel
2CIF = 704 x 288 pixels which is 0.2 mega pixel
4CIF or D1 = 704 x 576 pixels which is 0.4 mega pixel
960h = 960 x 576 pixels which is 0.55 mega pixel
Then you move into the HD cameras
720 HD = 1280 x 720 pixels which is 0.92 mega pixel
1080 HD = 1920 x 1080 pixels which is 2 mega pixel
As you can see modern HD cameras and dvr's can resolve much more detail.
It allows wider views with more detail than older PAL based dvr's
-
output 1 NO ------------- BELL
output 2 NO ------------- STB
Aux 0v -------------------- -12v
Aux 12v ------------------ +12v
One of the T is tamper in so connect T to -12v at the sounder and connect the other T to TR
Also Connect Output 1 and 2 C terminal to 0v in the panel and program your outputs respectivly for bell abd strobe
-
Hi,
I am trying to source an alarm that allows me to extract information about the state of window/ door and occupancy sensors. And I would also like set the alarm remotely if possible.
I would like it to operate via one of the following Protocols:
- Modbus
- Mbus
- Bacnet
I know that Honeywell offers an IP gateway, however the system doesn't output this information as standard. So this isn't suitable. However, another alarm system that uses a more open IP interface could work, although one of the above protcols would be better as I'm integrating it with a Priva BMS system.
If anyone could offer any suggestions, that would be much appreciated.
Fraser
I dont know of a system that nativly supports that, the galaxy does have a 232 printer port that delivers plain ascii of events though.
-
no i would run the bells from the panel and run everything else from the 2nd psu or use a bigger panel.
-
Just to confirm, do you mean both wired with a tamper and switch, but 1 box supplied by a separate 12v supply+battery back up?
you need to wire the ho- of the second bell from the tamp return of the first. Or only connect 1 tamper switch.
-
be cautious with 2 bells, you might be better setting the second bell as an scb rather than sab
[Ticket Question] Texecom Odyssey Faulty Bell?
in Intruder Alarms
Posted
To be sure then
1 ensure sounder is in SAB mode
2 connect only hold off voltages
3 ensure all tamper switches are closed
4 ensure high security bell is not enabled