admin
-
Posts
11 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Posts posted by admin
-
-
But we only offer paypal and bank transfer outside of the UK. This is because we cannot security check european credit cards from a uk system.
-
Also you can pay by credit card using 3d secure if yiu choose that option. Paypal express checkout is just one of the options available.
-
i would say its a config or sms string issue not a module issue. If it wasnt working atball then maybe.
I would suggest a factory restore and reprogram
-
Sorry should read 'code is'
-
You need a panel that supports groups. The veritas is a very basic panel and cannot work that way. You need something like a dimension or even better a siemens spc
-
it would depend on the ages of the other components. if over 5 yrs old then yes id replace it all. nice looking keypads are subjective. castle keypads are quite rated visually
-
id look at the enforcer or the visonic. If pro install look at the hkc quantum
-
yes the pg2 will capture images but will only send to a monitoring station
-
the mct-303, mct-302, mct-320 are but the sd-304 isnt
-
I dont understand the question?
-
you will use one of the programmable outputs programmed as bell for your bell connection. There should be a wiring diagram in the manual for your bells. But personally id of gone for a cqr bell as they are easy to wire up in 2 way.
-
The programming is similar
-
Finally does the control panel come with a keypad because I would like the flush satin chrome one. Or does it come as a second input device therefore I will have 2 keypads on the system
some models do, some dont. i need a link to verify. If it comes with a keypad it will be a plastic one
-
I'm going to go with the Castle Care Tech Euro 46. I have a few questions, should I use 6 or 8 core wire? I'm pretty sure everything wires back to the Control Panel.
Depends on the device. Id play safe and go for 8 core
-
your codenis correct? have you made any programming changes prior to it stopping?
-
the r8 will take a 7A/h but id gof for a 3.4, assuming its enough for the draw. That csn only be verified with a meter
-
I dont know of a black ip camera, you could use a body camera and spray a housing. We do have black hdsdi cameras though.
-
you will need to give the sensor power. connect + and - to the aux power terminals in the panel
-
I would recommend a kband dt in the conservatory, ie 7450 as x band will penetrate the glass more.
All modules are the same its just the cases that are different.
You can wire multiple modules eol but it wont comply (unless its a galaxy)
it would be better to have individual devices on each circuit.
-
i dont think the spc needs an eol resistor for tamper it should be a 0v return only.
-
In your environment i probably wouldnt of recommended a scantronic unit but anyway.
I wouldnt recommend a pir in a garage due to drafts, spiders etc. You would need a dualtec. However scantronic dont make a wireless dt. I would suggest you use door contacts instead.
-
You will need a lock and cable to interconnect the devices.
-
No the ip interface on the honeywell unit is designed for signalling to an arc. You can use a digicom etc to communicate with an arc and that in turn can be emailed to you via extended format
-
You could make one with this relay and a battery, ie 0.8 a/h 12v
Spc530.320
in Intruder Alarms
Posted
i think you may be getting confused with tamper return vs hold off?