Intruder Alarms

Can anyone tell me why & what the flashing light on my control panel means when it reads "RF problem"? thank you any info would be appreciated. My system is a wireless Scantronic 500r.

My problem is an Optima Compact giving spurious tamper alarms on the control panel. These are totally random and alerting the internal sounder not the outside alarm box when in day mode. The strobe flashes when this event occurs but as I say no alarm. When the system is set the alarm box works normally. On a suggestion I have changed the alarm panel battery . Spurious alarms from the panel seemed cured for 10 days but now have returned . Any possible answer to the issue appreciated.

I successfully installed my SPC4320 with IR sensor and Elmdene ELM300 internal sounder. This configuration works properly today. I wanted to connect the external Rapier sounder but I have two issues: - Tamper detection: I wired the tamper on sounder as explained in the Rapier manual by choosing the 2.2K resistor on the board and connected it directly to the TR pin on the SPC4320 but the tamper remains faulty even if the sounder is closed and fixed (sensors on the Rapier work well as confirmed by beep from the sounder). - EX+ and EX- signals: In SPC Pro->Panel setting->Controller input and output->Output (please see attached screenshot), I try to commute the ext.…

Hi i am after replacing an old alarm in my house, it currently has 5 pir's that are all wired, Door switches have been taken off when new doors fitted Think i need a hybrid system but would also like GSM control and internet if possible to access events it also needs to be able to connect to a Elmdene rapier 6000 sounder would like to add 4 wireless door contacts too preferably 2 way radio type. and 1 dual tec pir for the garage. seperate keypad with proximity fob or remote fob would be handy. last thing self fitting so nothing that is gonna take a degree to fit. what do you suggest and have you got it in stock.

Risco Gardtec KITCP8LG2 I've a problem with one of the central units. It isn’t possible to set the number of times the bell is capable of sounding during a set period. If the system is triggered, the bell sounds always, even the third, fourth, … time when the number of bell re-arms is set to two. I’ve already disconnected all the connections and made a factory reset, but it isn’t making a solution. Please can you help me?

I order and received your Secware Optima 4 x PIR Kit and a Honeywell ADE Informa Speech Dialler. The kit content description on your site is: 1 x Honeywell Optima Gen4 Mini Control Panel (8EP396A) 4 x Crow Swan 18m Value PIR's 1 x Ventcroft Evolution SAB and Cover (Blue Strobe) 1 x 100m 6 core Intruder Alarm Cable 1 x Secware Value 2.1 A/h Battery 1 x Surface Door Contact I actually received an Optima Gen 4 Compact Control Panel won

hi there i have an old karizma plus id system that i would like to replace with out replacing the original detectors and id biscuits i have been told that the texecom premier systems will work with the old id biscuits. Please can you tell me if that is correct and what i would need to purchase for it to work?

can you supply extra PIRs to infinate wireless kit and at what price?

Hi i had a scantronic 550r wireless alarm system fitted 18 months ago,great but it has gone off 15 times since then and every time it flashs rf trouble ,today it has been flashing all day .i am now to frighted to set the system , please help

Does this panel support EOL sensing?

I have a twenty years old DA Systems Abacus 6P control panel. Each of the six zones is split with two PIR's on each zone. The existing PIR's are believed to be by Comet (but could be Stella or Apollo)and each has an integrated zone spliter so enabling three wire connection(12v+ 0v and tamper). Can you supply a replacement for the PIR's.

I want to cennect to my Texecom Premier Elite 24 using Wintex on a laptop connected to the household LAN. Do I need the ComIP at around £107.79? Is the Connect Samrtcom Ethernet & WiFi CEL-0001 at £76.79 still available and would it be an alternative.

I was wondering whether you have a substitute for the FMX-DT-X8? This item is to replace an existing bottom entry Optrex PIR, and I am worried about the length of the wires that the requirements are (1) bottom cable entry (2) wire joiner preferably at bottom on unit (3) 7 wires, including the LED latch wire (4) medium sized room about 3.5 metres square. Would have a such a substitute PIR?