Intruder Alarms

I have a Menvier TS690 Security alarm that is now obsolete, Can I use the CQR contact SC513/WH/G3/B with this? The installation manual appears to say 'yes' but the existing contacts that I am replacing are not resistored.

Hi, I am looking for a detector to cover an extension with lots of glass in. A dual tech sensor with k band has been recommended. Is this detector a good choice please?

How many PCs can I put the software on?

Hi. I need to replace my Pyronix Enforcer wireless system outdoor Siren (leds have failed) and wanted to make sure that the newer Databell WE module with the new Varta battery’s is comparable with my set-up before I order. Running software v10.

Hi, I was looking to purchase 8x Menvier SD3 Speech Dialler. I can see this is now obsolete and the replacement is Eaton Universal 4G speech dialler. Our design is based around a PSTN version and we utilise our own PABX system so the BT PSTN switchoff will not be a problem for us. Do you have an alternative that supports a telephone line connection? Regards, Rubel

Product Name: HKC Miniature wireless magnetic contact with shock - Brown https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/wireless-ia-c-36_60/hkc-miniature-wireless-magnetic-contact-with-shock-brown-p-5971.html ------------------------------------------------------ Can I change battery on this unit myself. Rf mcsb . I do all my own DIY. I only want to know how to change the battery on theses contacts as engineer is always busy . I understand that any more serious issues with alarm needs an engineer to fix . Can you help.

https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/remote-signalling-c-36_57/eaton-scantronic-adapter-board-p-6480.html ------------------------------------------------------ I have an older i-ON40 Scantronics alarm (Cooper Security Limited) which I would like to reconfigure to enable remote access. However I haven't found any online information that can confirm if this older model is compatible with the remote App. It is currently running firmware version 4.04.17. Is the current firmware compatible with any remote Apps that are available? If not is it possible to upgrade the firmware? Which WIFI module would be required? COM-DATA-WIFI or COM-DATA-4…

Looking to purchase key fob for LG six Honeywell alarm system part number SS/F/UB

Hi how do I omit a zone on key a control pad 9651 /9941?

Texecom Veritas R8 Plus Panel with LED Remote Keypad https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/security-control-panels-c-36_102/control-panels-all-c-36_102_41/texecom-veritas-r8-plus-panel-with-led-remote-keypad-p-323.html Does this item come with the necessary hardware to act as an autodialler

, I have an older alarm panel that does not need EOL resistors. Is there a way to use this device without the EOL resistors selected as a normally closed circuit like traditional alarm circuits? Before I had the texecom AED 0001 which is fine but this new replacement talks about EOL resistors built in in the literature. I just want to know if it is compatible with the texecom veritas panel which doesn't use EOL

Would this battery below be a suitable replacement for a Texecom 12V 2.4AH BATTERY for an accent 8 mini alarm system? Secware 12v 2.3a/h Battery [MKES3-12SA] - £8.09 : | Best Price Promise | Security Warehouse Professional products

Hi can I install these detectors to a galaxy panel grade 3

I have recently installed several of your Pet immune pirs, however the alarm keeps on triggering when my two cats are in the house and the alarm is set. My question is, are they only pet immune to a certain height so if the cats jump up on a chair they will trigger it?

Hello, I have a wired fire and intruder alarm system, with the main hub in my house. The sensors are in a recording studio at the end of my garden. The fire/smoke sensor, above my recording desk is inaccessible and has failed. As the wires are inaccessible, I want to replace it with a wireless option. What do you suggest?

I have a Rokonet Wisdom domestic security system which was installed 2007 and when activated notifies 3 mobile phone numbers. The system was operated on 'Analogue' system but my phone has been switched to VOIP Can you please advise how to update the Wisdom alarm to operate over fibre or VOIP signal I Look forward to hearing from you

Will the SECWARE D20 Surface Contact work with an old Accenta Intruder Alarm?

How do the old buttons come out of the veritas 8 panel so I can put the new set in. I was hoping it would part from the front so I could just change number membrane, but not sure, thanks

Hi. Do you have wireless window vibration sensors in brown that work with Galaxy wireless alarm system?

Hi, Just purchased the ACT1313 PLUS Spike suppressor. Could you advise if just the RED/BLACK/EARTH wires only need to be connected or do you also need to connect extra wires from the terminal blocks to an offending circuit. Basically not sure what the terminal block is for? As you have probably gathered I am DIYer not an alarm specialist. Any advise would be grateful

Optex 20m External Twin Beam https://www.securitywarehouse.co.uk/catalog/cctv-equipment-c-1/detection-c-1_24/optex-20m-external-twin-beam-p-84.html Hi there, I am looking to have this type of system used in my house. To cover all usual access’s. Could you advise what infrared systems would be best and what control panel to streamline them with?

would this be a suitable quality replacement for a failed pir on my OPTIMA XM6 home alarm box Bosch Blue Line Gen2 12m PIR Detector https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/movement-detectors-c-36_116/all-c-36_116_37/bosch-blue-line-gen2-12m-pir-detector-p-2291.html

The requirement to use this sensor is for a sports hall in a school. Can it be installed inside a cage and do you supply a cage for it? Thanks

I currently have a Visonic MCR-304 receiver used with a MCT-320 Magnetic Contact Transmitter on a door. The MCR-304 has developed a fault and I believe this item is no longer available. I was looking at the Pyronix UR2-WE as a possible replacement. I appreciate I will need to replace the magnetic contact transmitter; is there a compatible device and will the Pyronix UR2-WE be suitable. The MCR-304 is connected to a Texecom Premier Elite 24 and uses the 12 volt from the alarm. Many thanks

Hi Im looking to connect a module to an intruder alarm to send a signal to a panel when the alarm goes off. Is this possible with something like the Flex trigger module?