Intruder Alarms

I'm installing a Texecom Premier Elite system in my house. Looking at the Odyssey X sounders they all have the window for an alarm installer to put their logo. Would this look odd without one? After a some searching I found the Odyssey 5E. This looks better (no insert window!) but perhaps an older model? Are there other boxes that might be better for my DIY use case?

check outputs? can anyone help me make sure i set it up right and what to check/fix i have paired my deltabell external sounder (see previous posts)problem i have now is whenever i enter my alarm code - the external sounder goes?when i do enter the codeit does bring up a message on the displayTesting....and then the standard now arming message...there is no alert about the external deltabell being triggered on the display panel and re entering the alarm code does not turn it off either. i have to access engineer menu and and exit and then it says 'saving nvm data' and it turns offproblem i have is i cannot set the alarm in either of my zones without the extern…

We moved into our house previously without pets but with one of the above alarm panels. I need to replace three PIR with pet friendly ones. You advertise the Scantronic 430, is this compatible with the 9450 panel. Also I wanted to install a dialler but it seems that you are out of stock of all diallers. If there is one that is compatible with my control panel could you please let me know. Also I would like a clue as to how to wire up the dialler to my panel.

Hi, we have constructer a community hall with aluminium windows and doors. Do you have a door and window sensor which can be wired into the building security alarm or wireless which can be concealed in the frame? The Client does not like surface mounted door alarm sensors.

I would like to know if you can help me specify a new system based on the Galaxy Dimension. I need it to be able to control 4 doors using mag locks / press to release. Video door entry integration and also intruder function. Proxy tag / swipe for enable/diable of the building alarm. I think I need a Galaxy Dimension GD-48 but need help with the other parts. You seem to be the best value and I need to make a purchase by next week at the latest.

Hello could you please help me with how i would wire the The 12 Volt Relay Base, 45681-508 to aTexecom PREMIER ELITE 48 8 ZONE CONTROL PANEL please

i may need to put in a dialler later if the customer wants it. Which version will accept an internal card? The spec sheet implies that the compact will not but the other two versions will?

Is the Honeywell 12v non latching detector base a NO or NC?

please recomend an alternative wireless external sounder with longer battery life

I have just purchased the rs232 remote programmer but it is saying that I need to enter installer mode to access this. The main reason I bought the pack was because I could not get the installer option on the menu and I have forgotted the installer code. I have already tried a master reset but to no avail. Please could you advise if you are able to assist.

Need a replacement wired room sensor please. Old system runs from Scantronic 9600 keypad. Not sure what would be a sensor match for either of those in attached images. Image 5186 is of original that came with system and image 5187 is a Rokonet fitted later. Thanks.

The unit we received is a EE1215W Universal transmitter. We need to look at getting a receiver for it. The switch we have generates a wireless signal that has to go back to something to then make the actual switch. All we have is the transmitter. I would need to install a receiver into our product in order to make it switch on and off

I would like to install a burglar alarm in a clients workshops! They already have Hikvision cctv system and proximity alarms and electronic gate which are the better alarms. I was looking at Pyronix or Ajax but I saw a comment from your store on a forum saying Pyronix were a little limiting are Texecom better Ajax are more expensive!!! Please give advise!

i am after a scan 9943 with 5 or 6 remotes. Will the keypad pair up ok with a 9930. How much is a 9941 & 9943 & fobs

Hi, will the UTC GS711 - Shock sensor with magnetic contact work with a Siemens SPC system? Or do you have any suggestion on a sensor for a SPC system that have both magnetic contact and shock sensor?

Hello I am having trouble finding a suitable hybrid wired/wireless alarm system. I have owned an alarm system in Australia, but I am having trouble finding a solution which re-creates the features that alarm had. The panel is for domestic purposes, and I would like it to have: * A wired door entry pin code pad * Be able to use a mixture of wired and wireless PIR/Glass break detectors/and shock detectors (Last one where possible) * The door contacts must be wireless, and as discrete as possible * Wired external bell box/strobe * The panel must be able to do part sets : eg, night mode > full perimeter armed,internal PIRs off, no delay on front door Home mode > Selecta…

Can you please confirm if I can connect my euro 76 panel using R/S 232 loom to my PC Also do I need tobuy converter to USB as my pc does not have serial connections

Will my SD1+ still work when BT goes digital?

I require a standalone wireless receiver plus 2 IR room sensor to connect to an ADC type panel (wire to existing sensors has been cut by flooring contractor)... The Nova 2 would appear to fit the bill?

We have had a few enquiries about how to install a door contact to a frameless glass door. I dont currently know of a single product, as an installer it would be usual to build up the contact based on the individual door for example

Ive been looking at the eaton cloud communicator for i-on control panels but im not sure if it would work with my control panel< i have a menvier 40 which is the same make but i would also need the adapter board, would you know if this would work

I have a customer with a broken Veritas 8C controller. They have 2nd remote R8 keypad. If I install a new Veritas V8C controller is the old 2nd keypad compatible?

I have a Menvier TS690 Security alarm that is now obsolete, Can I use the CQR contact SC513/WH/G3/B with this? The installation manual appears to say 'yes' but the existing contacts that I am replacing are not resistored.

I have a 9600 alarm installed and need to relocate the keypad, problem being the keypad is on a under stairs wall and the internal bell box is directly behind the keypad on the inside of the wall, the wire between the 2 is about 3” long, can I disconnect the bell? Move the keypad and reconnect the bell, I know the tamper will go off but will it be ok to just put the code in when it does go off ? thanks Tony

Hi, I am looking for a detector to cover an extension with lots of glass in. A dual tech sensor with k band has been recommended. Is this detector a good choice please?