Intruder Alarms

Could you please suggest correct replacesment battery for eurosec CPX control panel

i order from you 2 powermax plus they just arrived thank you i would like to ask you if you know 1. how can i set a PIR( zone 3) always bypass at the night? i want to press the button on the keyfob and set it bypass I can not find the instraction in the manual) 2. how can i setup the 4th key on the keyfob * ?? 3. witch pir with cable can i take from your store to use it with powermaxplus? 4. witch internal sirin with cable can i take

good morning. can anyone please help me in picking an internal sounder which can work with cpx? thanks

I am looking to replace my current alarm system with a new modern system. One of my main requirements is to allow remote access to the system, and so I am looking at the Scantronic i-on 40. Although all of my sensors are wired the wireless capability will be handy if I have to upgrade in the future. I also require SMS messaging through GSM and PSTN so would be looking to also install these modules as well as one extra wireless keypad. My main concern at the moment is how the wired sensors and PIRs are connected to the i-on 40 system to ensure it will work with my current installation. Can you provide any information as to how the zones are wired on the system, or are …

Please can you tell me if Optex FX50QZL PASSIVE DETECTOR is a dual technology PIR sensor?

hi i need to replace the red4bed key fobs? what the replacment? thanks mikey

The unit we received is a EE1215W Universal transmitter. We need to look at getting a receiver for it. The switch we have generates a wireless signal that has to go back to something to then make the actual switch. All we have is the transmitter. I would need to install a receiver into our product in order to make it switch on and off

Hi, i bought a powermax plus alarm, and have just attached the external sounder to complete the system (risco novagard6), however, upon arming and disarming using the keyfob, the external sounder sounds for 1 second. this doesnt happen if i use the keypad on the pm+ though. Please could you point me in the right direction.

Model ABC-0001 Can thsi be used outside under cover ,does it come with adjustable mounting bracket for outside mount.

Hi, I had a CP8L alarm previously installed in my house. The control panel became faulty so I decided to replace it with a more adaptable CPX control panel. I had read that the RKPs for the CP8L were compatible wth the CPX control panel. However, when I connect up one of the RKPs to the new CPX control panel it simply shows a back light and nothing else. The RKPs were working fine with the CP8L and I have connected both of them directly to the CPX with a short cable (with nothing else connected and with all devices connected), to no avail. Any help would be appreciated. Thanks, Darrn

I'm looking to spec up and purchase an alarm system for my house. I need a panel with 20 WIRED inputs, 2 keypads, and an extrenal sounder. I'm looking at the Honeywell galaxy flex system with the KO7 KP and ethernet interface, so we can use the Galaxy app to moniter. Please could you advise which products I will need for this package, and if you will despatch to my address in Greece. Thank in advance.

Considering a small/medium residential installation, 9 to 16 zones. Want to be notified by phone when there's a problem so I want notificcation by PSTN (and GSM probably via an external dialler). Feature list for the Eurosec CPX shows "speech dialler capability

I'm looking to buy an additional keypad for my current Accenta 8. The current RKP is the 8EP219 which is now obsolete. Does anyone know whether the 8EP416 will work with this. The Smartset will work using PTS but I'd like a Keypad. Looking at the 8EP416 it looks to only be compatible with the G3 and G4, as too does the new LCD keypad. Any help appreciated. Thanks

Hi I purchased a security panel, Texecom Premier DC8 + a few years ago from yourselves and I am only just fitting it but have mislaid the remote key pad and installation instructions. Can you advise which remote keypads you sell that will fit this panel as I note it is not for sale any more. Also, do you have the installation instructions available? Thanks

I am after a vibration sensor to fit to my roller shutter garage door to detect attempted forcing of the door. Do you have any products that detect vibration to the door itself rather than the frame: concerned that a frame mounted sensor may not be sensitive enough. Standard wired honeywell Optima alarm panel.

Does this Smoke sensor (Menvier M12) come complete ie with the back plate? thank you

Hi A friend of mine has bought a shop with a g3 alarm panel. Nobody knows the codes to use the alarm. I have tried various engineer codes but none work. Is there a way round this or is it a new main panel job. Thanks

which pir is suitable for scantronic 9449 burglaralarm

Hello, I'm french and my english is very poor... I'm a retired man living in a house and so I'm not a company. My house has 15 contacts of relays (one on each door and on each window), they had been placed during the construction of the house. The wires are in the wall and completely hidden. I'm looking for wired alarm with an ability of extension ( number of wired captors or also wireless captors). The centrale must be quite (no siren) to be dissimulated from the burglars. In my bedroom I want and keypad with a LCD that can indicate to me where the intrusion occurs. My job was in informatic system, so I will be happy to configure my alarm wit…

Risco beams 72 series (7225,7250 and 7275). The data sheet tells me what the tamper output is but not the alarm output ie if it a changeover relay, contact closure in alarm condition etc.

What is the difference between Texecom Premier TD-W and GJD D-Tect X wireless? Are they both intended to perform the same job? Is there any drawback for Texecom product compared to the GJD one? How can i choose between these two?

Hi, From forums and even neighbors I hear that The Securitywarehouse is in fact the only place to get an alarm system at a reasonable price. Only the quantity of the products creates some confusion with me, therefore I would like some advice. I am looking for an alarm system to install in my house next to my home automation system. As I see on your website I have the choice over various systems. My concern however is that all components are compatible with each other. I am looking for the following: A hybrid central unit (wired and wireless) with battery. 3 wired keypads 5 PIR detectors (both infrared and microwave) with pet immunity. (wired…

Hi I am interested in purchasing the Scantronic Homelink 55 system for use at my private residence - this will allow me to upgrade my existing system and utilise the alarm cabling with the added ability to install future wireless devices without the need to install any further cables. My query is this - when installing the alarm can all of the programming functionality be achieved by the use of the keypad included in the pack - or does any specialist device or software need to be purchased? Many thanks John

Hi all... I am a sparky with a builder that would like an additional keypad adding to his Gardtec 591. The current keypad is a Contour with ACE - I assume this is a keyfob system. He only has one code, and the system was under contract with an alarm company by the previous owner, so... 1. Is his code likely to allow the integration of another keypad? 2. As he doesn't have any keyfobs (ACE) does he need another ACE compatible keypad - if not what pad would do? 3. Does the 591 allow factory resets? 4. Is a new system the better option? Many thanks, Simannjo

hi i have a job for an alarm system in a barn with no heating and damp/sub zero temps. the barn has two doors one sliding and one side entrance/fire ext. it has mains electric for power supply. also want a gsm dialer for the system. i cannot find a system that will be ok with the damp conditions. please advise, kind regards