Intruder Alarms

I've a customer with a veritas R8 plus alarm system, which is not working. The keypad / control has the set & tamper lights lit, but none of the indicator lights. They've had a couple of people look at it, & although one company changed the battery which corrected the problem for about 6 weeks. It is now the same the control panel battery is showing 12.7v on the meter . The keypad does not appear to be functioning correctly as when some buttons are pressed they operate 2 buttons at once. I'm thionking of changing the panel, but also wondered if it could be a problem with the battery in the outside alarm box. I wondered if you have come across this problem before, …

Normally fit ADE Honeywell control panel with LCD remote keypad. New Customer Installation. Customer wants to be able to set alarm with a proximity key. What would you recommend.

Are all in the list below list compatible with "Visonic PowerMaxPro"? - 2 Smoke Detector (MCT-425) - 3 PowerCode

I just purchased from you the homelink 75 alarm system. I would like to purchased alarm box to put on the side of my house and operated the alarm system when we are upstairs at night. Please could you let me know which equipment I need to buy, thank you.

Brown recessed 24V door contact to switch a contactor for an oven off in the event of door closure

Hi there, I am currently in the process of renovating a house and I am looking to install a fire detection system that not only meets building regulations for a three-story house but also offers higher protection than the minimum LD3 level. In the past, I have used a Honeywell Galaxy panel with fire zones, but that was a few years ago, and I am sure there have been advancements since then. I've been considering the C-Tec Hush Pro solution, but I'm concerned about nearing the 16-device limit. Running the cables around the house in a single run seems feasible, especially with the ceilings down and floors up, but I'm wondering if a larger 2-wire panel with a loop p…

Hello I’m looking to purchase an alarm system with the following requirements: GSM Wireless Control box Capable of having two real external siren boxes Three wireless smoke alarms Three wireless PIR’s Two wireless door switches And also the capability of connecting at least two hard wired PIR devices Do you have any brands that would fulfill this requirement?

I got a speech dialler a few months ago been, working well untill a round 2 weeks ago. it's stopped dialling out or reciving calls. I have plenty of credit phone, and the sim card works in a mobile phone. the antenna is ok no damage that I can see. do you have any ideas on what the problem is?

Will an inovonics EE1215 universal transmitter work on a pyronix enforcer V10 with no additional hardware needed ?

We are looking for a fully wireless, self install inturder system for our Gardeners Yard, we would need a few internal motion detectors and door contacts and some external gate contacts, we also would want some external sirens. We do have some power in the building for the base, but no internet and very little 4G signal., Is this something you can advise on?

looking for compatible door sensors, keypad and key fobs. have noticed that the key fob is sold out

Hello I need to replace an wireless siren MCS-710 with a new model MCS-730/740. The control panel is a PowerMax Plus SN:15408.9BA2 JS700611 V3.4.08. Can you confirm that the MCS-730 and or MCS-740 are compatibile?

Hi I need to replace my current wired alarm system.. I have a mains wired alarm with wired connections. I have a couple of PIR's that are wired, which I see no reason to replace as the cables are hidden. I would like to add additional pirs wireless. I can see execom Kit 3 32 Zone Self-Contained Wireless Kit which looks like it can take 4 wired zones. So I could install this on my current set-up and add wirless pir's to additional rooms. I have a couple of questions. How is the alarm disabled. Is it on the control panel? I see it comes with 2xPremier Elite SmartKey. What exactly is this? Can this disable the alarm without having to put in a code? I have 2 children which I …

Hi. Do you know if there is a known bug in Galaxy G2 20 alarm such that after an AC Fail it can only be reset by Engineer. Mine offers Manager Rest Required but this does not work and I have to use the Engineer login. Checked the forum but could not find any relevant info. Thanks in advance.

I am looking for a replacement for RISCO B-673-0008, to work with Gardtec 595 & I understand the iWISE DT PET is now no longer available. Thanks Fred.

We have an old Scantronic 500r. Reading the specs for an additional PIR (534r) and Vibe sensor (520r) suggests different possible frequencies. I understand the UK is 433 MHz, but the spec for the 534r shows "520REUR-50" as the model number. Given other info on your website I'm worried that the "EUR" and "UK" models are different frequencies. How ca nI check what ours operates at and can we specify that when ordering?

Hi, my Siren for the pyronix enforcer MK2 is low battery. Is it simply swapping the old batteries out and no programming needed Thanks

What is the difference between Texecom Premier TD-W and GJD D-Tect X wireless? Are they both intended to perform the same job? Is there any drawback for Texecom product compared to the GJD one? How can i choose between these two?

I just tried to purchase a GUARDALL W74065 M2 (W74065) IR detector, but the order was cancelled because the item is out of stock. I need to purchase a replacement for a faulty Guardall Apollo IR detector. Can you suggest a suitable replacement?

I have a question regarding one of the configuration settings on the NEXT PG2 The 'Disarm Activity' setting has a number of options including: Not Active, Yes-No Delay, Yes + 5s delay...etc I am confused about the 'delay' setting. What does the 'delay' value relate to, i.e. the delay between what and what? Also, in what type of scenario would the device be configured to be 'Yes + 30s delay' for example.

Good morning, I've bought a GalaxyFlex and a RF Portal from Honeywell which work like a charm I would like to add some Wireless shock/vibration sensor with Door Contact in my house. I've bought the "Honeywell Le Sucre Wireless Shock Sensor with Contact White" ( Model: SHKC8M ), but it's quite big. I would prefer something smaller, more discreet , like the Honeywell Wireless Door/window compact magnetic contact Brown ( Model: DO800M2 ), but with the shock sensor feature Could you advise me another product (shock + contact) which would be compatible with the GalaxyFlex ? Thanks in advance for your help Cedric

Hi, I'm looking for the firmware update 6.50 on SPI Key "SOF-096-E1-650" for the GD96 released in Feb. Will you have this available at some point, as it enables the RF keyfobs ?

Does the CO48-C-E1-Touch above include the new, CP041-00 / CP042-00, or the old TouchCenter,CP040-01?

My system is showing a fault "Telecommand Batt Low" which refers to the 723r Telecmmand remote setting device. I have changed the batteries in the 3 telecommand devices I have however the system continues to show the error. I have moved the system into Engineer mode and it will not now exit. Going through the command set to exit Engineer Mode ie 99 tick, the systems goes through the "checking system bus" bit ok and after agreeing to "exit eng" the unit starts the "Checking System" routine and then flags up the "Telecommand Batt Low" problem again and will exit the Engineer Mode. How do I get out of this, as I say I have put new batteries in the remotes but this does not …

Please advise which is the best alarm system suitable for diy for under