Intruder Alarms

Currently have A Veritas R8plus 10 years old that is now faulty. Would like to replace with a new one, is current model a direct replacement to old. Does new unit come with battery. Can it be replaced by DIY

Proposed Gargage Alarm System Before placing a package order I just need to confirm that the Scantronic 9651EN-43 Panel will support 2 x remote extension speakers. I note it has 3 fully programmable outputs, I need a volt free relay / contact output (N/C healthy) Open Circuit on alarm condition for remote signalling to an existing Scantronic 9752 panel located in the house (this will then represent a seperate zone alarm, just like say a PIR in alarm condition going from N/C to open circuit) - please could you advise, order ready to go.

Hi, I am told with this system, powermax plus, I can get Pir's to hard wire. I want to hard wire 3 Pir's, but see only 2 hard wire zones. What pir's can I use for hard wire please, and are there pet friendly ones ? Which hard wired external alarm can I buy with this ? Are all batteries included with the system please ? Wanting to buy the visonic plus control panel, 5 wireless door contacts, brown colour, 2 wireless pet tolerant pir's, 1 hard wired pir, 1 wired external alarm, 1 dummy alarm box, and 2 key fobs / Can you give me the best options kit wise, and cheapest way of buying these, and total costs please ? Thanks, Alan. alanbl@sky.com

Also I have a question about the Genesis 7ah 12v battery http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1340 Will this battery fit inside the Scantronic 9751 control panel? http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&cPath=36_102_41&products_id=549 Your reply will be appreciated, as I wsh to order items as soon as possible. Thanks

Hi I am after a hardwired alarm system, there will be 11 PIR's 2 keypads 4 panic buttons and 2 sounders. Can you provide a quote please and I will place an order, thanks.

I need an above average system castle or simular thats got 6 zones or more, part wired part wireless due to solid floor. kit to include 3 wireless door contacts, 2 pet wired pir, 3 standard wired pir, 1 wired alarm box, 1 dummy, 1 x internal horn, kit to be auto dialer and/or gsm, all nesaccary batterys 100mm cable.

Hi I intend to upgrade my home security,the system,has a Veritas R8 panel and 8 PIR(IFSAC MQ1510)zones along with 2x RKP there have been many false alarms, due to, I think the poor PIR's, I was looking at installing up to 14 zones (2 door contacts, 8 Pir, 2 dual tech PIR,(orangery & Kitchen) 2 dual tech PIR (detached Garage)and 3 RKP. could you recommend the best control panel, RkP and PIR's I need to have the garage, armed when the house is not and also to have the 2 PIR's on the first floor omittable. Is it possible when there are any alarm activations to call a phone number. I have been looking at the Gardex 595 & GT490, and Pyronix KX PIR would these be suit…

Hi I am looking for an alarm for a workshop/shed, 1 opening window, 1 fixed window and double doors. I have used Scantronic previously and therefore would like the following:- Scantronic 9448, with 2 contact switches, a glass break sensor, Elmdene INT400 and a battery. (I have avoided PIR\\\'s because of false alarms) Could you advise if this is suitable or are there better options, please advise battery type for above.

I am about to order the Scantronic Homelink 55 from your site but have a couple of questions... Can I add an extra keypad with prox reader? The description of the Homelink mentions only the 9940 and 41 but they are no longer available I think? Will the Scantronic PIR's (wired types) work OK with the system, as I only need wireless contacts for the doors, all other sensors will be wired? Any recommendations for a suitable external sounder?

I have bourght quite a few of these & on wiring & checking them find none sound when tested. All you get is a constant lit LED. Is there a possiblity that all are faulty or has someone designed the ultimate pointless product? If one went into alarm I'd expect all linked alarms to sound. Is this not the case with all linked 12v linked detectors?

is it true that Visonic plans to stop production of the tower 20am?

Hello I have managed to obtain a copy of Wintex(v5) and the Veritas UDL. I've read that Wintex can also allow the programming of the veritas excel. Is this true? I can't find the option under "account" that allows you to choose a veritas; the list just has the premier systems... With the Veritas UDL am I required to buy a texecom PC-COM? Can't I just make my own RS232 using the tx rx and 0v (pinout 2 3 5 on the rs232) Can you please tell me whether or not I can build my own cable?

Hi, I have just finished fitting a Honeywell Accenta Mini G4 with LCD control panel system to my house. I have got to the point of powering the system up and setting it up. The manual says "check that the factory fitted links are connected to the terminals PA, TAMP and T-A. I have fitted it to PA, the TAMP connections are being used for the other sensors on the system, and the T-A terminals are wired to the Bell Box. I then connect the mains power and the battery. The manual says there should be an audible indication, which there is. The 'power' light on the G4 main unit illuminates. The LCD keypad lights up and displays "Accenta G4 RKP F131-01-111". The 'power'…

Is it possible to change the English language of the Galaxy panels into the Dutch language? Maybe by flashing the prom? Thanks in advance for your help. Marc

Hi, I'm looking for some advice, my domestic alarm died on me early hours the other day, control box has gone, wont power on at all. I'm looking to replace it, and was thinking about the items below, 1..ADE Honeywell Accenta Poly Gen4 with LCD Keypad 2..ADE Honeywell Informa Speech Dialler I'm planning on using the exisiting PIR's, internal Door Open Sounder and New Texecom external Sounder, I'd like to tie my garage into the alarm system if possible, what would I need? So 3 x questions 1.............Would the above work with what I already have? 2.............We have had a new Wood effect UPVC front door fitted, and the old door sensor is whit…

Hi. I'm after some advice regarding wiring a pyronix belle box to an optima xm alarm panel ,basically which wire go where. Thanking you in anticipation.

What is the differences between the CQR FW/GD04 Communicator (GSM) and the visonic GSM-100? Are there any other gsm-modules that are compatible with the pm+? My pm+ controlpanel is bought in sweden, will I have any problems if I buy any of the gsm-modules you have from UK? Will the sms-messages still be in swedish?

Hi I have a ADE Honeywell Accenta Mini Gen4 with 4 bosch pir

My keypad has given up the ghost with some butons not working so I cannot disable the alarm with the code. I've taken off the keypad and it has 4 wires connected. It looks very simple to replace so is it simply a case of buying a replacement and installing in the same manner? When I reconnect the power and the alarm starts going, I should be able to enter my code and all is back to normal? Or is it more complicated than that? I've been quoted for a replacment & fitting but it seems such a simple job to do yourself. Do I need to be aware of anything else?

My new house was pre-wired for a hard wired alarm which I planned to fit myself. The guy who run the cabling did a good job except he did not wire for contacts on the doors. There is no chance to wire them now as I cannot run cables thrugh the dry wall panels. My solution I think is something like a Homelink 55 I will have 6 PIR, three door contacts, and two RKP's as I have a point upstairs for night setting the system. Can I add a second 9943 RKP to the Homelink 55 ? The Homelink 55 has 6 wired zones which would cover the PIR's. I hope I could use wireless contacts for the rest. Prox tags would also be a nice addition. Grateful for any advic…

You have 2 items listed on your web site from Texecom. TEX-CGC-0001 which is listed as a Speech and Text Dialler at

I have purchased these intems against your order number 22312. I am having problems setting up the receiver to recognise the transmitter. I have teh items to hand, connected and ready to program, The transmitter is set/connected as a mode 6.with the door switch supplied. The receiver however doe's not recognise the the transmitter. Currently it hase the yellow supervision light on with the two red zone lights flashing. Can you please advise a solution, or better still, can we arrange a time when someone can talk me through the set-up? Thanks for help and best regards,

Do you sell a Visonic Powermax Complete Kit?

How do these watches operate pleae. I cannot see any buttons on side, do you press the pad which is the face of the watch? Thanks for your help

I have installed the door contact (to replace one that ceased to operate). I have followed the "deleting" and "learning" instructions for my 500r panel and acheived the "double beep" to indicate that the panel has learned the code. However when the panel is "set", although all other sensors set off the alarm when activated, the door sensor does not activate the alarm on door opening or tamper (the led on the sensor does operate). Please advise what my next step should be.