Intruder Alarms

Can you tell me if I can use Texecom equipment to send a CONTACT ID signal using a SIM card The monitroing company says I must use CONTACT ID to send a digital signal over a voice call

Just a quick question do you stock the Risco gardtec 490x control panel with RKP which is same style as the 800 and 816 models. If so how much is it?

i was thinking that i could use some wire and connect the auxiliary input of MC-302E PG2 with a outdoor PIR sensor but i don't know if this could be done.I was thinking of the OPTEX BX80 NR (maybe if it fits i install the MC302E PG2 inside the BX80NR)cause i can't imagine a way to have my balcony covered (12x2,4m) with the TOWER 20AM PG2. Do you think i could do such a thing? or what other option i have to cover this area with Visonic compatible product ?

Hi there I have an MCR-304 + 3 x MCT-303's in my basket. 2/. From your experience in the field what is the effective range. In my application I have a fair amount of brickwork through which the RF must travel - probably about 15M to the furthest 303 and about 3 x 9" conventional brick walls. 3/. Are the 303's 'supervised transmitters'. Thanks.

Would it be possible to use a Voltek 1803 alongside a Takex PR11BE Beam?

Product Name: HKC Miniature wireless magnetic contact with shock - Brown https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/wireless-ia-c-36_60/hkc-miniature-wireless-magnetic-contact-with-shock-brown-p-5971.html ------------------------------------------------------ Can I change battery on this unit myself. Rf mcsb . I do all my own DIY. I only want to know how to change the battery on theses contacts as engineer is always busy . I understand that any more serious issues with alarm needs an engineer to fix . Can you help.

Hi I spoke to someone this afternoon but didn't catch the name as I was on the mobile. The issue is I have a Scantronic 8136 that's dead in the water. The keypads report the right time, and the alarm company is able to dial in and see the log. Engineer came today and said it looks pretty likely we need to change the panel. Whe I spoke to you this afternoon, couldn't hear very well what you told me on the phone about what the problem might be (doing school run at the time). I would be happy to replace the panel given reported quality issues. Please advise in writing which panels would be suitable for a swap out, with minimal wiring changes, no rewiring…

I'm looking to buy a Honeywell SS/01 SS/F Simple Set Reader for connection to a new Honeywell Accenta Mini G4 or Optima Compact G4. Is the relay return required from the simple set reader to the panel OR will it operate just using the normal 4 wire Positive, Negative, Sound and Comms?

Hi, is question more to the techniacl support, about advice: I was wondering abou Texecom Panel CAA*0026 I'm wondering if that panel has got a dialler function, can it call or send message in case of alarm, if not maybe this one CAB-0001 or should buy dialler CGC 0001 and integrate with panel (Do I need any digi card) Regards Mariusz

I am using the 660 in conjunction with a scantronic 500r. The panel is 12v removed for alarm and the 660 is the opposite. The instalation guide refers to a dip switch to change the polarity. I cannot identify this on the board. Any ideas .

I have a 20+ year old burglar system. I plan to get Texecom Veritas R8 panel. 1. Are there likely to be problems connecting to existing bell and PIRs? 2. Do I need Veritas R8, rather than Veritas, if I want to connect Speech unit at a later stage? Thank you.

Could you please tell me how I can pick the updates for the newer panel with the new display panel coming up to date

Will the SECWARE D20 Surface Contact work with an old Accenta Intruder Alarm?

I have just replaced a Flash Guard XL Plus with a Pyronix Belle Sounder fitted to a Pyronix Octagon panel. Flash-guard Belle 1 Tampout BT 4 Supply - B- 5 Supply+ B+ 6 Trigger BA 8 Strobe- STB Added link between TF and B- The speakers sound, the strobe works. the LED's flash and the anti tamper operates when the alarm is unset. If I put the panel in engineer mode and operate the anti tamper switch the panel does not register a tamper condition which is correct but the Belle sounder still operates which means the front panel can not be removed for testing without setting of the Belle internal alarm. …

Hi This is my 4th 500r panel ive installed that ive bought from you. I have problems with the new panel ive just installed, the 524r and 536r works intimately ive tried the devices on my own panel and they work fine. Is there a problem with the 500r+ alarm panel? Many thanks Regards Tony Sellwood

Bought a Galaxy GD-48 with touchcenter all is All is ok except the front LED’s do not operate. System is ready but no green led , when you set the system, the system sets but the red LED is not on. System reports no faults or trouble and touchcenter LED test works fine all LED’s operate.

H I am looking at the Honeywell Accenta Mini Gen4 control panel,and am not sure which Internal sounder is best suited for this system , the Honeywell Internal sounder or HCK Echo or CQR Piccilo . I was intending to wire the sounder into the control panel Any advise please

Hi Is there a key fob option for the RKP. Thanks For your help Enjoy the weekend.

Hi. Do you have wireless window vibration sensors in brown that work with Galaxy wireless alarm system?

The Risco Wisdom comes in two versions. A plain LCD driven panel and an LCD & Voice driven panel, giving set, unset and alarm voice prompts. All three kit pages mention: 'Two Model: LCDversion and LCD version with voice prompts' As it doesnt specifically say on your kits im wondering which version you sell?

Hi, The remote keypad I have found that the number 7 is sticking in the depressed position. I have been trying to press and release repeatedly to see if it will free up. Any tips ?? Regards Jan

Was wondering if you can supply a simple remote panel for the Optima Plus 2

I have purchased a Scantronic ion-40 control panel and a Pyronix Deltabell E, but I'm having a problem getting the bell to trigger. I have attempted to follow the wiring diagrams supplied with the panel and the bell, but they don't match up 100% and unfortunately I cannot seem to get the bell to trigger at all Deltabell Connections: T T ENG HOLD STB BELL +12V -12V ION-40 Panel Connections: AUX 0V AUX 12V OUTPUT 1: NO OUTPUT 1: C OUTPUT 1: NC OUTPUT 2: NO OUTPUT 2: C OUTPUT 2: NC TR

I have motion detectors Next K9 PG2. They create false alarm due to small animal walking in the area, How can I configure in order to eliminate these false alarms?

Would like to know if the Visonic 33 kit is easy to install?