Intruder Alarms

Wondering if the Knight Double Push PA Stainless Steel is a Grade3 or if you have any grade3 buttons in stock? Also, rough idea of P&P (2.1kgs)to Republic of Ireland for 3 PA Buttons 2 Viper GLX 1 Calibration tool

Hi, will the UTC GS711 - Shock sensor with magnetic contact work with a Siemens SPC system? Or do you have any suggestion on a sensor for a SPC system that have both magnetic contact and shock sensor?

I was wondering if you could help me? I am looking at this gsm module as a means of contact me. I have no telephone landline at the premises I want to install this and I need something that will phone me like a mobile phone and not just send text messages as this would not work, due to hearing a text message at night. Also how many numbers can be stored/programmed into the module?

I need to fit 5 hard wired fire alarms in my house as part of a loft conversion. I bought a Scantronic 9751 based burglar alarm system from you a few years ago. Do you supply fire alarms that can be hard wired into this system?

These PIRs require a power supply of min. 9V which I intend to draw from the Powermaster Central 12V auxiliary output, as it is backed up by a battery. The PIRs consume 19mA max, so 38 mA in total, which exceeds the Powermaster specs of 36 mA max for this auxiliary output. Can you suggest an alternative power output please, or do you think it's no problem to connect the PIRs as planned to the Central.

Hi, I want to purchase 1x heat sensor and 2 x smoke sensor to add to my current BT VP1000 alarm system. Can you advise me on what is compatible with it.

i am after a scan 9943 with 5 or 6 remotes. Will the keypad pair up ok with a 9930. How much is a 9941 & 9943 & fobs

I am keen to purchase a Texecom Veritas Excel Panel with LCD keypad and an additional LED keypad for a second door. I see your kit includes the LCD keypad and I can order a second keypad. I already have one R8 Plus installed and can program these. I am also keen to obtain the PC-COM cable to make programming easier. I have found one on your site. I wanted to ask if this was compatible with the Excel panel and also if the software is supplied or easily downloaded. I would also like to order a 12v battery for this. I can obtain this from you or from local Maplin - i would prefer to order all from one place if I can. Finally, I already have PIRs in place as this will…

hi just wanting to know what battery i need to buy for this sytem i have three sensors and one door contact and been told on 4 occasions differant ampage batteries

I require a flush door contact to be fitted to a wooden door. Can you please recommend a product? As I am confused by the terms \\\'Grade 3\\\' \\\'Grade 2\\\' and \\\'Green Resistor\\\' \\\'Red Resistor\\\' I will be purchasing the Scantronic 9651 (not sure if that makes a difference)

Can you kindly advise ideal system for the following criteria; Looking for alarm with ID Plus for my PIR's due to wiring setup of them. 15 sensors in dwelling. Only need the control panel and keypad as all other hardware in situ. wishlist: if system has sms or dialler also remote arm and status. Price up to approx

Can help me to find the right burglar alarm and smoke/heat detectors for domestic use please?

I am looking for a simple intruder alarm system for a large house. Not really interested in remote access and monitoring or systems requiring computers to load up and configure. Need 4 x RKP and 19 x PIRs. No PAs or door contacts, though will want to use PA functions on all the RKPs. I really like the simplicity of setting up and using the Accenta control panel, but am I right in thinking that 8 zones are the maximum available for PIRs? I could easily group together 2 or 3 PIRs on some of the zones but that can make fault finding more tedious. Would appreciate you confirming number of zones available to PIRs on Accenta Gen4, also any suggestions for another product.

I have a flat which is fairly secure and unlikely to be broken into. However for £200 or so it seems a good idea to fit an alarm. I have been considering the Yale Premium and was looking at a forum on http://www.diynot.com/forums/viewtopic.php?t=255745&start=30. One contributor was not so keen on the Yale alarm and stated: ?If you really want a Yale system, try this instead. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1015 Similar price and a graded product. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=2202 I have looked at your site but find it difficult to…

I need some help to choose an alarm system. My house is approximately 230 sqM and in all doors and windows I have mounted wired magnetic sensors with 4 wires, 2 for when the window/door is opened and 2 for sabotage safety so you can

i would like a system with 8 pir's 3 door sensors 2 key pads (1 on control box, 1 as remote) please can you advise. many thanks

I think I need 11 zones: Kitchen door (E/E) Front Door (E/E) Workshop PIR Garage PIR Lounge (Pet Friendly PIR) Hallway 1 (Inhibited Pet Friendly PIR for E/E) Hallway 2 (Pet Friendly PIR) Bedroom 1 (Pet Friendly PIR) Bedroom 2 (Pet Friendly PIR) Dining room (Pet Friendly PIR) Kitchen (Inhibited Pet Friendly PIR for E/E) 1 x RKP External Sounder Is there a system/ kit that will do this (Honeywell Galant? - is this panel obsolete?) or can I link multiple PIR's to use the 8 zone kit as advertised Honeywell ADE LCD Accenta 4 x Pet PIR Starter Kit

Could you please advice on best pet friendly pir sensors

Hi, I am trying to connect an AG6 sounder to an ADE Logic 6 panel (supplied by you) but the instructions supplied by both units are not clear and the AG6 instructions do not even conform to the suppied unit. The Logic 6 panel connections are - strobe - strobe + scb T scb A bell+ D bell- B The sounder AGL connections are - ST- R- SW- V+ V- Can you please advise how these should be connected

In some reason dialer installed at customer site is not working properly. Condition of test I did: 1) Dialler installed next to Master BT socket 2) Line is connected to "Line A" and "Line B" on the dialler 3) BT socket connected to "Tel A" and "Tel B" on the dialler 4) All devices disconnected from BT socket (eg Telephones, Card Payments Machines, Routers) After alarm is triggered I get the below in random order: 1) Sometimes I receive phone call from dialer and there is just silent for about 60sec 2) Sometimes is just message to press confirmation code. Without main recorded message. 3) Sometimes there is silence for about 15-20sec and than I hear My re…

I would like to know if you can help me specify a new system based on the Galaxy Dimension. I need it to be able to control 4 doors using mag locks / press to release. Video door entry integration and also intruder function. Proxy tag / swipe for enable/diable of the building alarm. I think I need a Galaxy Dimension GD-48 but need help with the other parts. You seem to be the best value and I need to make a purchase by next week at the latest.

HI there, I just need to have a chat about order a, x1, Honeywell Panel with key pad, 8EP396A x4, PIRs, pet friendly x1, door sensor x1, Informer Speech dialer 8EP276 x2, Mains smoke alarm linked, prefare AICO x1, Mains heat alarm linked, prefare AICO x1, 100M alarm cable. Is there a kit that can cover the above?

I am replacing a Karisma plus alarm system in a large house. Unfortunately this randomly goes off & is especially susceptible to fluorescent lights. Requirements for new system:- Be able to identify all items individually and have them displayed with name on RKP eg kitchen window, front door. House has several loops of 4 core (unscreened) cable so can't put items on individual wiring. No windows = 17 no doors = 3 no PIRs = 6 no fire detectors = 2 no RKPs = 3 System should have dialer + speech module or GSM Hopefully system can be set to detect two events before alarming.

re: Honeywell Intellisense IS215T. We would like to replace all motion sensors in our house with the IS215T. There are approximately 20no. Can we simply buy these and connect up to existing wiring? Do we need a new control box?

My current alarm Guardall Rascal Super is broken so needs replacing(we are using 4 programmed zones and chime). I'd like to replace the control unit unit and bellbox but use existing wiring, sensors and internal speaker. I'm looking at the MDT Avanti 8 and AG6 bellbox (current bellbox looks tatty and has no strobe). 1. Is the chime quite loud? We would like to hear if someone enters the house from the other side of the building. 2. The Rascall Super system is 12v and I think the Avanti 8 is 13.8v, will our existing sensors work with the new control unit?