securitywarehouse Posted June 25, 2010 Share Posted June 25, 2010 Hallo, I was interested in the above device. I was needing a relay that would be voltage sensitive switch. Basically I have some electric gates that will have lead acid battery backup. I want to set the system so that if the power goes off and the voltage drops below say 10v, I can use a relay trigger to open the gates and hold them open. Can the voltage trigger on this relay be set to a specific voltage in this way? Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted June 30, 2010 Share Posted June 30, 2010 you 'could' do it this way but id suggest its a problematic way. A better way would be to use a 240v relay and connect this to the incoming supply. When that opened it could open your gates straight away. If you would like a delay then id add a timer to hold off the relay. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.