securitywarehouse Posted May 4, 2010 Share Posted May 4, 2010 Good Morning, We are working on a clients property which has a Videx video phone entry system: Art: 901K Serial N.H244425 this was connected to a number pad / camera at the entry point and is used for a gate entry system - the wiring was removed by a previous contractor and our client wishes to have it all connected back up and working - we are after a set of electrical schematics and any tips or advice you can give me on connecting it (ususal wire types - operating distance etc) the previous connection did not include a gate open function even though the phone does have this button on it, the gates will require a single n/o volt free contact to operate them (or information to use an interface relay to that effect) regards DA (on behalf of one of our field engineers) Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted May 4, 2010 Share Posted May 4, 2010 Please see the attached diagram Note this doesnt have a clean switched output on it so you will need an ac relay to give you clean swicthes for your operator. Quote Link to comment Share on other sites More sharing options...
securitywarehouse Posted May 5, 2010 Author Share Posted May 5, 2010 When we view the response from Tech6 on the forum we see neither the diagram or the link to it - do we need to switch something on in our browser? Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted May 5, 2010 Share Posted May 5, 2010 I have asked admin to allow guests to see attachements Previously you needed to be a member to view them. James Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.