Good Morning,

We are working on a clients property which has a Videx video phone entry system:

Art: 901K

Serial N.H244425

 

this was connected to a number pad / camera at the entry point and is used for a gate entry system - the wiring was removed by a previous contractor and our client wishes to have it all connected back up and working - we are after a set of electrical schematics and any tips or advice you can give me on connecting it (ususal wire types - operating distance etc)

the previous connection did not include a gate open function even though the phone does have this button on it, the gates will require a single n/o volt free contact to operate them (or information to use an interface relay to that effect)

regards DA

(on behalf of one of our field engineers)

Please see the attached diagram

 

Note this doesnt have a clean switched output on it so you will need an ac relay to give you clean swicthes for your operator.

When we view the response from Tech6 on the forum we see neither the diagram

or the link to it - do we need to switch something on in our browser?

I have asked admin to allow guests to see attachements

 

Previously you needed to be a member to view them.

 

James