Jump to content
Security Warehouse Support Forum
Secware

Ticket Question [UL approved device]

Recommended Posts

Hi,

We are looking for a UL approved device and the Honeywell unit does not have that, please see my full specification below

Our application calls for motion detection within a space (floor area of max 6mx4m) mounted at a height of nominally 2.5 – 3m with angle and rotational adjustment to optimise operation. Hence the request for the Bosch mounting bracket.
We only require a single relay contact for detection of motion. (switching duty 24Vdc at < 10mA)
PIR supply 24vdc operation preferred if possible, if not 12Vdc operation is OK.
This application is for the US market and UL approval is specified. Hence the initial request for the Bosch PIR.
Tamper facility is not necessary, however if fitted is OK.
Pet facility is not necessary. However if fitted is OK.

Please can you advise if you can supply a PIR to suit from your available stock.
Many thanks your assistance with this.

Share this post


Link to post
Share on other sites

No other than the spec in the original query above, i.e) floor area (6m x 4m), elevation (2.5 - 3m),  single volt free contact switching on motion detection, adjustment in 2 planes, 24Vdc operation preferred, 24Vdc switching on the contact, UL approval.

Share this post


Link to post
Share on other sites

 

On 10/31/2019 at 7:41 AM, Barry said:

No other than the spec in the original query above, i.e) floor area (6m x 4m), elevation (2.5 - 3m),  single volt free contact switching on motion detection, adjustment in 2 planes, 24Vdc operation preferred, 24Vdc switching on the contact, UL approval.

Optex detectors are UL tested, but dont have adjustment (unsure why this is needed) but could use a bracket. Also IIRC the takex units are UL too

 

James

Share this post


Link to post
Share on other sites

Thanks for the reply.

I have looked for the Optex variants but have drawn a blank for the criteria I am looking for could you possible advise of a specific part number or range please.

I cannot find any UL approved takex types.

Appreciate your help with this.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.