Hello,

I have some question about the alarm system.
We have two cats. Now I'm looking for the right alarm system for our house. I have 26 wired motion sensors and still need 4 wireless door and 7 wireless motion sensors. Which alarm is the better and the more modern, the Honeywell Galaxy Dimension GD-48 or the Galaxy Flex 50.

Second question, I have the wired motion sensor “Active8 PIR with Pet Immunity”,( I bought them last year in England),

are they compatible with Galaxy Dimension or Galaxy Flex. Or do I need other new wired motion sensors.

The last question, what is the meaning of "Links" in the alarm system.

Because the Honeywell Galaxy Dimension GD-48 have 64-Links and the Galaxy Flex 50 only 5-Links. What is the difference?

(And what is the difference of Grade 3 and Grade 2.)

Thanks in advance.

 

Grade 3 is a higher security level

Links are for custom programming of functions

The gd is the better panel

Yes the pirs will be fine

I would go for the Dimension over the Flex every time.  I use links on my own system to do the following:

 

- Turn three external lighting circuits on when a zone input signal is fired with a light sensor OR when I enter a code to override on the virtual or physical keypad. The circuits are in different places on the panel and power RIO's, but the links join them all together.

- I have another code that is used to open and close the garage door

- A door contact on the garage door also turns all the garage strip lights on when the garage door opens

 

I am easily over 5 links...

 

The only thing that lets the Dimension down over the Flex is that there's no decent GPRS/GSM option. The only one that's sold for the Dimension is a third party IRIS device that isn't compatible with anything.  You can always go down the more reliable Ethernet module route for connectivity though.

Hi Stuart_mcg,

I am very much interested in how to set-up links like what you have achieved. I would like to program my Honeywell Galaxy Dimension alarm panel to turn lighting circuit on with a lightsensor. Please may you share how to do this ?

Thanks

Use links with the link source as the circuit and the destination as the output type you have programmed